The torque and tilt gamble
Identifieur interne : 001666 ( PascalFrancis/Corpus ); précédent : 001665; suivant : 001667The torque and tilt gamble
Auteurs : K. D. Teichmann ; I. A. M. TeichmannSource :
- Journal of cataract and refractive surgery [ 0886-3350 ] ; 1997.
Descripteurs français
- Pascal (Inist)
English descriptors
- KwdEn :
Abstract
Purpose: To analyze possible suture configurations at the haptics of posterior chamber intraocular lenses (lOLs) and estimate the resulting tilt. Setting: King Khaled Eye Specialist Hospital, Riyadh, Kingdom of Saudi Arabia. Methods: Using a plastic cylinder with two pairs of holes drilled on opposite sides and an IOL with eyelets in the haptics, we determined possible suture configurations and analyzed them for net torque on the IOL haptics that would result in tilting of the optic. Results: We identified 64 combinations of regular and countless combinations of irregular suture configurations. Among the 16 most likely combinations, only 4 were torque-free (or torque neutral), 2 caused maximum tilt, and 10 induced some tilting. Theoretically, torque could be eliminated by radial suture placement, but this is anatomically undesirable, and by positioning the eyelet perpendicular to the haptic, but this is technically difficult. Longer suture bites tended to lessen the torsion on the haptic but increased the risk of the suture looping around the free end of the haptic. Conclusion: Surgeons using scleral fixation of a posterior chamber IOL should be aware of the possibility of inducing tilt and should aim for symmetrical suture configurations at the two haptics.
Notice en format standard (ISO 2709)
Pour connaître la documentation sur le format Inist Standard.
pA |
|
---|
Format Inist (serveur)
NO : | PASCAL 97-0376780 INIST |
---|---|
ET : | The torque and tilt gamble |
AU : | TEICHMANN (K. D.); TEICHMANN (I. A. M.) |
AF : | King Khaled Eye Specialist Hospital, PO Box 7191/Riyadh 11462/Arabie Saoudite (1 aut.) |
DT : | Publication en série; Niveau analytique |
SO : | Journal of cataract and refractive surgery; ISSN 0886-3350; Coden JCSUEV; Etats-Unis; Da. 1997; Vol. 23; No. 3; Pp. 413-418; Bibl. 19 ref. |
LA : | Anglais |
EA : | Purpose: To analyze possible suture configurations at the haptics of posterior chamber intraocular lenses (lOLs) and estimate the resulting tilt. Setting: King Khaled Eye Specialist Hospital, Riyadh, Kingdom of Saudi Arabia. Methods: Using a plastic cylinder with two pairs of holes drilled on opposite sides and an IOL with eyelets in the haptics, we determined possible suture configurations and analyzed them for net torque on the IOL haptics that would result in tilting of the optic. Results: We identified 64 combinations of regular and countless combinations of irregular suture configurations. Among the 16 most likely combinations, only 4 were torque-free (or torque neutral), 2 caused maximum tilt, and 10 induced some tilting. Theoretically, torque could be eliminated by radial suture placement, but this is anatomically undesirable, and by positioning the eyelet perpendicular to the haptic, but this is technically difficult. Longer suture bites tended to lessen the torsion on the haptic but increased the risk of the suture looping around the free end of the haptic. Conclusion: Surgeons using scleral fixation of a posterior chamber IOL should be aware of the possibility of inducing tilt and should aim for symmetrical suture configurations at the two haptics. |
CC : | 002B25B |
FD : | Implantation; Lentille intraoculaire; Chambre postérieure; Suture chirurgicale; Configuration; Inclinaison; Fil; Modèle |
FG : | Chirurgie |
ED : | Implantation; Intraocular lens; Posterior chamber; Suturation; Configuration; Tilt; Thread; Models |
EG : | Surgery |
SD : | Implantación; Lente intraocular; Cámara posterior; Sutura quirúrgica; Configuración; Inclinación; Hilo; Modelo |
LO : | INIST-20937.354000067327970140 |
ID : | 97-0376780 |
Links to Exploration step
Pascal:97-0376780Le document en format XML
<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en" level="a">The torque and tilt gamble</title>
<author><name sortKey="Teichmann, K D" sort="Teichmann, K D" uniqKey="Teichmann K" first="K. D." last="Teichmann">K. D. Teichmann</name>
<affiliation><inist:fA14 i1="01"><s1>King Khaled Eye Specialist Hospital, PO Box 7191</s1>
<s2>Riyadh 11462</s2>
<s3>SAU</s3>
<sZ>1 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Teichmann, I A M" sort="Teichmann, I A M" uniqKey="Teichmann I" first="I. A. M." last="Teichmann">I. A. M. Teichmann</name>
</author>
</titleStmt>
<publicationStmt><idno type="wicri:source">INIST</idno>
<idno type="inist">97-0376780</idno>
<date when="1997">1997</date>
<idno type="stanalyst">PASCAL 97-0376780 INIST</idno>
<idno type="RBID">Pascal:97-0376780</idno>
<idno type="wicri:Area/PascalFrancis/Corpus">001666</idno>
</publicationStmt>
<sourceDesc><biblStruct><analytic><title xml:lang="en" level="a">The torque and tilt gamble</title>
<author><name sortKey="Teichmann, K D" sort="Teichmann, K D" uniqKey="Teichmann K" first="K. D." last="Teichmann">K. D. Teichmann</name>
<affiliation><inist:fA14 i1="01"><s1>King Khaled Eye Specialist Hospital, PO Box 7191</s1>
<s2>Riyadh 11462</s2>
<s3>SAU</s3>
<sZ>1 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Teichmann, I A M" sort="Teichmann, I A M" uniqKey="Teichmann I" first="I. A. M." last="Teichmann">I. A. M. Teichmann</name>
</author>
</analytic>
<series><title level="j" type="main">Journal of cataract and refractive surgery</title>
<title level="j" type="abbreviated">J. cataract refractive surg.</title>
<idno type="ISSN">0886-3350</idno>
<imprint><date when="1997">1997</date>
</imprint>
</series>
</biblStruct>
</sourceDesc>
<seriesStmt><title level="j" type="main">Journal of cataract and refractive surgery</title>
<title level="j" type="abbreviated">J. cataract refractive surg.</title>
<idno type="ISSN">0886-3350</idno>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Configuration</term>
<term>Implantation</term>
<term>Intraocular lens</term>
<term>Models</term>
<term>Posterior chamber</term>
<term>Suturation</term>
<term>Thread</term>
<term>Tilt</term>
</keywords>
<keywords scheme="Pascal" xml:lang="fr"><term>Implantation</term>
<term>Lentille intraoculaire</term>
<term>Chambre postérieure</term>
<term>Suture chirurgicale</term>
<term>Configuration</term>
<term>Inclinaison</term>
<term>Fil</term>
<term>Modèle</term>
</keywords>
</textClass>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en">Purpose: To analyze possible suture configurations at the haptics of posterior chamber intraocular lenses (lOLs) and estimate the resulting tilt. Setting: King Khaled Eye Specialist Hospital, Riyadh, Kingdom of Saudi Arabia. Methods: Using a plastic cylinder with two pairs of holes drilled on opposite sides and an IOL with eyelets in the haptics, we determined possible suture configurations and analyzed them for net torque on the IOL haptics that would result in tilting of the optic. Results: We identified 64 combinations of regular and countless combinations of irregular suture configurations. Among the 16 most likely combinations, only 4 were torque-free (or torque neutral), 2 caused maximum tilt, and 10 induced some tilting. Theoretically, torque could be eliminated by radial suture placement, but this is anatomically undesirable, and by positioning the eyelet perpendicular to the haptic, but this is technically difficult. Longer suture bites tended to lessen the torsion on the haptic but increased the risk of the suture looping around the free end of the haptic. Conclusion: Surgeons using scleral fixation of a posterior chamber IOL should be aware of the possibility of inducing tilt and should aim for symmetrical suture configurations at the two haptics.</div>
</front>
</TEI>
<inist><standard h6="B"><pA><fA01 i1="01" i2="1"><s0>0886-3350</s0>
</fA01>
<fA02 i1="01"><s0>JCSUEV</s0>
</fA02>
<fA03 i2="1"><s0>J. cataract refractive surg.</s0>
</fA03>
<fA05><s2>23</s2>
</fA05>
<fA06><s2>3</s2>
</fA06>
<fA08 i1="01" i2="1" l="ENG"><s1>The torque and tilt gamble</s1>
</fA08>
<fA11 i1="01" i2="1"><s1>TEICHMANN (K. D.)</s1>
</fA11>
<fA11 i1="02" i2="1"><s1>TEICHMANN (I. A. M.)</s1>
</fA11>
<fA14 i1="01"><s1>King Khaled Eye Specialist Hospital, PO Box 7191</s1>
<s2>Riyadh 11462</s2>
<s3>SAU</s3>
<sZ>1 aut.</sZ>
</fA14>
<fA20><s1>413-418</s1>
</fA20>
<fA21><s1>1997</s1>
</fA21>
<fA23 i1="01"><s0>ENG</s0>
</fA23>
<fA43 i1="01"><s1>INIST</s1>
<s2>20937</s2>
<s5>354000067327970140</s5>
</fA43>
<fA44><s0>0000</s0>
<s1>© 1997 INIST-CNRS. All rights reserved.</s1>
</fA44>
<fA45><s0>19 ref.</s0>
</fA45>
<fA47 i1="01" i2="1"><s0>97-0376780</s0>
</fA47>
<fA60><s1>P</s1>
</fA60>
<fA61><s0>A</s0>
</fA61>
<fA64 i1="01" i2="1"><s0>Journal of cataract and refractive surgery</s0>
</fA64>
<fA66 i1="01"><s0>USA</s0>
</fA66>
<fC01 i1="01" l="ENG"><s0>Purpose: To analyze possible suture configurations at the haptics of posterior chamber intraocular lenses (lOLs) and estimate the resulting tilt. Setting: King Khaled Eye Specialist Hospital, Riyadh, Kingdom of Saudi Arabia. Methods: Using a plastic cylinder with two pairs of holes drilled on opposite sides and an IOL with eyelets in the haptics, we determined possible suture configurations and analyzed them for net torque on the IOL haptics that would result in tilting of the optic. Results: We identified 64 combinations of regular and countless combinations of irregular suture configurations. Among the 16 most likely combinations, only 4 were torque-free (or torque neutral), 2 caused maximum tilt, and 10 induced some tilting. Theoretically, torque could be eliminated by radial suture placement, but this is anatomically undesirable, and by positioning the eyelet perpendicular to the haptic, but this is technically difficult. Longer suture bites tended to lessen the torsion on the haptic but increased the risk of the suture looping around the free end of the haptic. Conclusion: Surgeons using scleral fixation of a posterior chamber IOL should be aware of the possibility of inducing tilt and should aim for symmetrical suture configurations at the two haptics.</s0>
</fC01>
<fC02 i1="01" i2="X"><s0>002B25B</s0>
</fC02>
<fC03 i1="01" i2="X" l="FRE"><s0>Implantation</s0>
<s5>01</s5>
</fC03>
<fC03 i1="01" i2="X" l="ENG"><s0>Implantation</s0>
<s5>01</s5>
</fC03>
<fC03 i1="01" i2="X" l="SPA"><s0>Implantación</s0>
<s5>01</s5>
</fC03>
<fC03 i1="02" i2="X" l="FRE"><s0>Lentille intraoculaire</s0>
<s5>02</s5>
</fC03>
<fC03 i1="02" i2="X" l="ENG"><s0>Intraocular lens</s0>
<s5>02</s5>
</fC03>
<fC03 i1="02" i2="X" l="SPA"><s0>Lente intraocular</s0>
<s5>02</s5>
</fC03>
<fC03 i1="03" i2="X" l="FRE"><s0>Chambre postérieure</s0>
<s5>03</s5>
</fC03>
<fC03 i1="03" i2="X" l="ENG"><s0>Posterior chamber</s0>
<s5>03</s5>
</fC03>
<fC03 i1="03" i2="X" l="SPA"><s0>Cámara posterior</s0>
<s5>03</s5>
</fC03>
<fC03 i1="04" i2="X" l="FRE"><s0>Suture chirurgicale</s0>
<s5>04</s5>
</fC03>
<fC03 i1="04" i2="X" l="ENG"><s0>Suturation</s0>
<s5>04</s5>
</fC03>
<fC03 i1="04" i2="X" l="SPA"><s0>Sutura quirúrgica</s0>
<s5>04</s5>
</fC03>
<fC03 i1="05" i2="X" l="FRE"><s0>Configuration</s0>
<s5>05</s5>
</fC03>
<fC03 i1="05" i2="X" l="ENG"><s0>Configuration</s0>
<s5>05</s5>
</fC03>
<fC03 i1="05" i2="X" l="SPA"><s0>Configuración</s0>
<s5>05</s5>
</fC03>
<fC03 i1="06" i2="X" l="FRE"><s0>Inclinaison</s0>
<s5>07</s5>
</fC03>
<fC03 i1="06" i2="X" l="ENG"><s0>Tilt</s0>
<s5>07</s5>
</fC03>
<fC03 i1="06" i2="X" l="SPA"><s0>Inclinación</s0>
<s5>07</s5>
</fC03>
<fC03 i1="07" i2="X" l="FRE"><s0>Fil</s0>
<s5>08</s5>
</fC03>
<fC03 i1="07" i2="X" l="ENG"><s0>Thread</s0>
<s5>08</s5>
</fC03>
<fC03 i1="07" i2="X" l="SPA"><s0>Hilo</s0>
<s5>08</s5>
</fC03>
<fC03 i1="08" i2="X" l="FRE"><s0>Modèle</s0>
<s5>10</s5>
</fC03>
<fC03 i1="08" i2="X" l="ENG"><s0>Models</s0>
<s5>10</s5>
</fC03>
<fC03 i1="08" i2="X" l="SPA"><s0>Modelo</s0>
<s5>10</s5>
</fC03>
<fC07 i1="01" i2="X" l="FRE"><s0>Chirurgie</s0>
<s5>37</s5>
</fC07>
<fC07 i1="01" i2="X" l="ENG"><s0>Surgery</s0>
<s5>37</s5>
</fC07>
<fC07 i1="01" i2="X" l="SPA"><s0>Cirugía</s0>
<s5>37</s5>
</fC07>
<fN21><s1>223</s1>
</fN21>
</pA>
</standard>
<server><NO>PASCAL 97-0376780 INIST</NO>
<ET>The torque and tilt gamble</ET>
<AU>TEICHMANN (K. D.); TEICHMANN (I. A. M.)</AU>
<AF>King Khaled Eye Specialist Hospital, PO Box 7191/Riyadh 11462/Arabie Saoudite (1 aut.)</AF>
<DT>Publication en série; Niveau analytique</DT>
<SO>Journal of cataract and refractive surgery; ISSN 0886-3350; Coden JCSUEV; Etats-Unis; Da. 1997; Vol. 23; No. 3; Pp. 413-418; Bibl. 19 ref.</SO>
<LA>Anglais</LA>
<EA>Purpose: To analyze possible suture configurations at the haptics of posterior chamber intraocular lenses (lOLs) and estimate the resulting tilt. Setting: King Khaled Eye Specialist Hospital, Riyadh, Kingdom of Saudi Arabia. Methods: Using a plastic cylinder with two pairs of holes drilled on opposite sides and an IOL with eyelets in the haptics, we determined possible suture configurations and analyzed them for net torque on the IOL haptics that would result in tilting of the optic. Results: We identified 64 combinations of regular and countless combinations of irregular suture configurations. Among the 16 most likely combinations, only 4 were torque-free (or torque neutral), 2 caused maximum tilt, and 10 induced some tilting. Theoretically, torque could be eliminated by radial suture placement, but this is anatomically undesirable, and by positioning the eyelet perpendicular to the haptic, but this is technically difficult. Longer suture bites tended to lessen the torsion on the haptic but increased the risk of the suture looping around the free end of the haptic. Conclusion: Surgeons using scleral fixation of a posterior chamber IOL should be aware of the possibility of inducing tilt and should aim for symmetrical suture configurations at the two haptics.</EA>
<CC>002B25B</CC>
<FD>Implantation; Lentille intraoculaire; Chambre postérieure; Suture chirurgicale; Configuration; Inclinaison; Fil; Modèle</FD>
<FG>Chirurgie</FG>
<ED>Implantation; Intraocular lens; Posterior chamber; Suturation; Configuration; Tilt; Thread; Models</ED>
<EG>Surgery</EG>
<SD>Implantación; Lente intraocular; Cámara posterior; Sutura quirúrgica; Configuración; Inclinación; Hilo; Modelo</SD>
<LO>INIST-20937.354000067327970140</LO>
<ID>97-0376780</ID>
</server>
</inist>
</record>
Pour manipuler ce document sous Unix (Dilib)
EXPLOR_STEP=$WICRI_ROOT/Ticri/CIDE/explor/HapticV1/Data/PascalFrancis/Corpus
HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 001666 | SxmlIndent | more
Ou
HfdSelect -h $EXPLOR_AREA/Data/PascalFrancis/Corpus/biblio.hfd -nk 001666 | SxmlIndent | more
Pour mettre un lien sur cette page dans le réseau Wicri
{{Explor lien |wiki= Ticri/CIDE |area= HapticV1 |flux= PascalFrancis |étape= Corpus |type= RBID |clé= Pascal:97-0376780 |texte= The torque and tilt gamble }}
![]() | This area was generated with Dilib version V0.6.23. | ![]() |