EdenteV2, Istex, Corpus, bibRecord, 003423

Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique

Identifieur interne : 003423 ( Istex/Corpus ); précédent : 003422; suivant : 003424

Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique

Auteurs : Aysegul G. Gurbulak ; Kerem Kilic ; Zekiye Ero Lu ; Eyup Gercekcioglu ; Bulent Kesim

Source :

Journal of Prosthodontics [ 1059-941X ] ; 2013-01.

RBID : ISTEX:699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2

English descriptors

Abstract

Purpose: The aim of this study was to measure the in vitro retention force of double conical crowns fabricated using primary galvanoforming and secondary casting techniques and those fabricated using primary casting and secondary galvanoforming techniques under simulated clinical conditions before and after a wear test.

Url:

https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/fulltext/pdf

DOI: 10.1111/j.1532-849X.2012.00897.x

Links to Exploration step

ISTEX:699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2

Le document en format XML

<record><TEI wicri:istexFullTextTei="biblStruct"><teiHeader><fileDesc><titleStmt><title xml:lang="en">Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
<author><name sortKey="Gurbulak, Aysegul G" sort="Gurbulak, Aysegul G" uniqKey="Gurbulak A" first="Aysegul G." last="Gurbulak">Aysegul G. Gurbulak</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Kilic, Kerem" sort="Kilic, Kerem" uniqKey="Kilic K" first="Kerem" last="Kilic">Kerem Kilic</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Ero Lu, Zekiye" sort="Ero Lu, Zekiye" uniqKey="Ero Lu Z" first="Zekiye" last="Ero Lu">Zekiye Ero Lu</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Gercekcioglu, Eyup" sort="Gercekcioglu, Eyup" uniqKey="Gercekcioglu E" first="Eyup" last="Gercekcioglu">Eyup Gercekcioglu</name>
<affiliation><mods:affiliation>Department of Material Science and Engineering, Erciyes University, Faculty of Engineering, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Kesim, Bulent" sort="Kesim, Bulent" uniqKey="Kesim B" first="Bulent" last="Kesim">Bulent Kesim</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
</titleStmt>
<publicationStmt><idno type="wicri:source">ISTEX</idno>
<idno type="RBID">ISTEX:699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2</idno>
<date when="2013" year="2013">2013</date>
<idno type="doi">10.1111/j.1532-849X.2012.00897.x</idno>
<idno type="url">https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/fulltext/pdf</idno>
<idno type="wicri:Area/Istex/Corpus">003423</idno>
<idno type="wicri:explorRef" wicri:stream="Istex" wicri:step="Corpus" wicri:corpus="ISTEX">003423</idno>
</publicationStmt>
<sourceDesc><biblStruct><analytic><title level="a" type="main">Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
<author><name sortKey="Gurbulak, Aysegul G" sort="Gurbulak, Aysegul G" uniqKey="Gurbulak A" first="Aysegul G." last="Gurbulak">Aysegul G. Gurbulak</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Kilic, Kerem" sort="Kilic, Kerem" uniqKey="Kilic K" first="Kerem" last="Kilic">Kerem Kilic</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Ero Lu, Zekiye" sort="Ero Lu, Zekiye" uniqKey="Ero Lu Z" first="Zekiye" last="Ero Lu">Zekiye Ero Lu</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Gercekcioglu, Eyup" sort="Gercekcioglu, Eyup" uniqKey="Gercekcioglu E" first="Eyup" last="Gercekcioglu">Eyup Gercekcioglu</name>
<affiliation><mods:affiliation>Department of Material Science and Engineering, Erciyes University, Faculty of Engineering, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Kesim, Bulent" sort="Kesim, Bulent" uniqKey="Kesim B" first="Bulent" last="Kesim">Bulent Kesim</name>
<affiliation><mods:affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</mods:affiliation>
</affiliation>
</author>
</analytic>
<monogr></monogr>
<series><title level="j" type="main">Journal of Prosthodontics</title>
<title level="j" type="alt">JOURNAL OF PROSTHODONTICS</title>
<idno type="ISSN">1059-941X</idno>
<idno type="eISSN">1532-849X</idno>
<imprint><biblScope unit="vol">22</biblScope>
<biblScope unit="issue">1</biblScope>
<biblScope unit="page" from="63">63</biblScope>
<biblScope unit="page" to="68">68</biblScope>
<biblScope unit="page-count">6</biblScope>
<publisher>Blackwell Publishing Inc</publisher>
<pubPlace>Malden, USA</pubPlace>
<date type="published" when="2013-01">2013-01</date>
</imprint>
<idno type="ISSN">1059-941X</idno>
</series>
</biblStruct>
</sourceDesc>
<seriesStmt><idno type="ISSN">1059-941X</idno>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Acrylic resin</term>
<term>American college</term>
<term>Carrier components</term>
<term>Clinical conditions</term>
<term>Conical</term>
<term>Conical crowns</term>
<term>Conus</term>
<term>Crown</term>
<term>Denture</term>
<term>Different combinations</term>
<term>Digital balance</term>
<term>Double conical crowns</term>
<term>Double conical crowns gurbulak</term>
<term>Double crown</term>
<term>Double crowns</term>
<term>Elastic deformation</term>
<term>Galvanoformed</term>
<term>Galvanoforming</term>
<term>Galvanoforming process</term>
<term>Gurbulak</term>
<term>Median retention force</term>
<term>Partial dentures</term>
<term>Present study</term>
<term>Primary crown</term>
<term>Primary crowns</term>
<term>Prosthodontics</term>
<term>Retainer</term>
<term>Retention</term>
<term>Retention force</term>
<term>Retention forces</term>
<term>Retention mechanism</term>
<term>Retentive</term>
<term>Retentive force</term>
<term>Secondary crown</term>
<term>Secondary crowns</term>
<term>Tapered conus angle</term>
<term>Telescopic</term>
<term>Telescopic crown</term>
<term>Telescopic crowns</term>
<term>Telescopic denture</term>
<term>Weight values</term>
</keywords>
<keywords scheme="Teeft" xml:lang="en"><term>Acrylic resin</term>
<term>American college</term>
<term>Carrier components</term>
<term>Clinical conditions</term>
<term>Conical</term>
<term>Conical crowns</term>
<term>Conus</term>
<term>Crown</term>
<term>Denture</term>
<term>Different combinations</term>
<term>Digital balance</term>
<term>Double conical crowns</term>
<term>Double conical crowns gurbulak</term>
<term>Double crown</term>
<term>Double crowns</term>
<term>Elastic deformation</term>
<term>Galvanoformed</term>
<term>Galvanoforming</term>
<term>Galvanoforming process</term>
<term>Gurbulak</term>
<term>Median retention force</term>
<term>Partial dentures</term>
<term>Present study</term>
<term>Primary crown</term>
<term>Primary crowns</term>
<term>Prosthodontics</term>
<term>Retainer</term>
<term>Retention</term>
<term>Retention force</term>
<term>Retention forces</term>
<term>Retention mechanism</term>
<term>Retentive</term>
<term>Retentive force</term>
<term>Secondary crown</term>
<term>Secondary crowns</term>
<term>Tapered conus angle</term>
<term>Telescopic</term>
<term>Telescopic crown</term>
<term>Telescopic crowns</term>
<term>Telescopic denture</term>
<term>Weight values</term>
</keywords>
</textClass>
</profileDesc>
</teiHeader>
<front><div type="abstract">Purpose: The aim of this study was to measure the in vitro retention force of double conical crowns fabricated using primary galvanoforming and secondary casting techniques and those fabricated using primary casting and secondary galvanoforming techniques under simulated clinical conditions before and after a wear test.</div>
</front>
</TEI>
<istex><corpusName>wiley</corpusName>
<keywords><teeft><json:string>conical</json:string>
<json:string>retention force</json:string>
<json:string>retentive force</json:string>
<json:string>galvanoformed</json:string>
<json:string>galvanoforming</json:string>
<json:string>denture</json:string>
<json:string>secondary crown</json:string>
<json:string>primary crowns</json:string>
<json:string>secondary crowns</json:string>
<json:string>conus</json:string>
<json:string>telescopic</json:string>
<json:string>primary crown</json:string>
<json:string>present study</json:string>
<json:string>retention forces</json:string>
<json:string>gurbulak</json:string>
<json:string>prosthodontics</json:string>
<json:string>double crowns</json:string>
<json:string>conical crowns</json:string>
<json:string>retainer</json:string>
<json:string>retentive</json:string>
<json:string>weight values</json:string>
<json:string>clinical conditions</json:string>
<json:string>american college</json:string>
<json:string>double conical crowns</json:string>
<json:string>retention mechanism</json:string>
<json:string>telescopic crowns</json:string>
<json:string>double crown</json:string>
<json:string>carrier components</json:string>
<json:string>median retention force</json:string>
<json:string>crown</json:string>
<json:string>digital balance</json:string>
<json:string>double conical crowns gurbulak</json:string>
<json:string>acrylic resin</json:string>
<json:string>tapered conus angle</json:string>
<json:string>different combinations</json:string>
<json:string>partial dentures</json:string>
<json:string>galvanoforming process</json:string>
<json:string>telescopic crown</json:string>
<json:string>telescopic denture</json:string>
<json:string>elastic deformation</json:string>
<json:string>retention</json:string>
</teeft>
</keywords>
<author><json:item><name>Aysegul G. Gurbulak DDS, PhD</name>
<affiliations><json:string>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</json:string>
</affiliations>
</json:item>
<json:item><name>Kerem Kilic DDS, PhD</name>
<affiliations><json:string>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</json:string>
</affiliations>
</json:item>
<json:item><name>Zekiye Eroğlu DDS, PhD</name>
<affiliations><json:string>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</json:string>
</affiliations>
</json:item>
<json:item><name>Eyup Gercekcioglu DDS, PhD</name>
<affiliations><json:string>Department of Material Science and Engineering, Erciyes University, Faculty of Engineering, Kayseri, Turkey</json:string>
</affiliations>
</json:item>
<json:item><name>Bulent Kesim DDS, PhD</name>
<affiliations><json:string>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</json:string>
</affiliations>
</json:item>
</author>
<subject><json:item><lang><json:string>eng</json:string>
</lang>
<value>Double conus crown</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>galvanoforming</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>reciprocating wear test</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>retentive force</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>telescopic denture</value>
</json:item>
</subject>
<articleId><json:string>JOPR897</json:string>
</articleId>
<arkIstex>ark:/67375/WNG-HHZ7DP6N-4</arkIstex>
<language><json:string>eng</json:string>
</language>
<originalGenre><json:string>article</json:string>
</originalGenre>
<abstract>Purpose: The aim of this study was to measure the in vitro retention force of double conical crowns fabricated using primary galvanoforming and secondary casting techniques and those fabricated using primary casting and secondary galvanoforming techniques under simulated clinical conditions before and after a wear test.</abstract>
<qualityIndicators><score>6.454</score>
<pdfWordCount>3902</pdfWordCount>
<pdfCharCount>24457</pdfCharCount>
<pdfVersion>1.3</pdfVersion>
<pdfPageCount>6</pdfPageCount>
<pdfPageSize>595.274 x 782.286 pts</pdfPageSize>
<refBibsNative>true</refBibsNative>
<abstractWordCount>46</abstractWordCount>
<abstractCharCount>321</abstractCharCount>
<keywordCount>5</keywordCount>
</qualityIndicators>
<title>Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
<pmid><json:string>22928873</json:string>
</pmid>
<genre><json:string>article</json:string>
</genre>
<host><title>Journal of Prosthodontics</title>
<language><json:string>unknown</json:string>
</language>
<doi><json:string>10.1111/(ISSN)1532-849X</json:string>
</doi>
<issn><json:string>1059-941X</json:string>
</issn>
<eissn><json:string>1532-849X</json:string>
</eissn>
<publisherId><json:string>JOPR</json:string>
</publisherId>
<volume>22</volume>
<issue>1</issue>
<pages><first>63</first>
<last>68</last>
<total>6</total>
</pages>
<genre><json:string>journal</json:string>
</genre>
</host>
<namedEntities><unitex><date><json:string>3285</json:string>
<json:string>2013</json:string>
</date>
<geogName></geogName>
<orgName><json:string>Instron Corp.</json:string>
<json:string>SPSS Inc., Chicago</json:string>
<json:string>UK Ltd</json:string>
<json:string>Erciyes University Department of Scienti</json:string>
<json:string>Erciyes University</json:string>
<json:string>D Company Ltd., Tokyo, Japan</json:string>
<json:string>American College of Prosthodontists</json:string>
<json:string>Turkey Keywords Double</json:string>
<json:string>Research Projects</json:string>
</orgName>
<orgName_funder></orgName_funder>
<orgName_provider></orgName_provider>
<persName><json:string>Carl Zeiss</json:string>
<json:string>Set-Dent Dental</json:string>
<json:string>Kerem Kilic</json:string>
</persName>
<placeName><json:string>Germany</json:string>
<json:string>Ulm</json:string>
<json:string>UK</json:string>
<json:string>Norwood</json:string>
<json:string>Bremen</json:string>
<json:string>MA</json:string>
<json:string>Kayseri</json:string>
</placeName>
<ref_url></ref_url>
<ref_bibl><json:string>Ohida et al</json:string>
<json:string>Gurbulak et al</json:string>
<json:string>Bayer et al</json:string>
<json:string>Behr et al</json:string>
</ref_bibl>
<bibl></bibl>
</unitex>
</namedEntities>
<ark><json:string>ark:/67375/WNG-HHZ7DP6N-4</json:string>
</ark>
<categories><wos><json:string>1 - science</json:string>
<json:string>2 - dentistry, oral surgery & medicine</json:string>
</wos>
<scienceMetrix><json:string>1 - health sciences</json:string>
<json:string>2 - clinical medicine</json:string>
<json:string>3 - dentistry</json:string>
</scienceMetrix>
<scopus><json:string>1 - Health Sciences</json:string>
<json:string>2 - Dentistry</json:string>
<json:string>3 - General Dentistry</json:string>
</scopus>
</categories>
<publicationDate>2013</publicationDate>
<copyrightDate>2013</copyrightDate>
<doi><json:string>10.1111/j.1532-849X.2012.00897.x</json:string>
</doi>
<id>699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2</id>
<score>1</score>
<fulltext><json:item><extension>pdf</extension>
<original>true</original>
<mimetype>application/pdf</mimetype>
<uri>https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/fulltext/pdf</uri>
</json:item>
<json:item><extension>zip</extension>
<original>false</original>
<mimetype>application/zip</mimetype>
<uri>https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/fulltext/zip</uri>
</json:item>
<istex:fulltextTEI uri="https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/fulltext/tei"><teiHeader><fileDesc><titleStmt><title level="a" type="main">Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
</titleStmt>
<publicationStmt><authority>ISTEX</authority>
<publisher>Blackwell Publishing Inc</publisher>
<pubPlace>Malden, USA</pubPlace>
<availability><licence>© 2012 by the American College of Prosthodontists</licence>
</availability>
<date type="published" when="2013-01"></date>
</publicationStmt>
<notesStmt><note type="content-type" subtype="article" source="article" scheme="https://content-type.data.istex.fr/ark:/67375/XTP-6N5SZHKN-D">article</note>
<note type="publication-type" subtype="journal" scheme="https://publication-type.data.istex.fr/ark:/67375/JMC-0GLKJH51-B">journal</note>
</notesStmt>
<sourceDesc><biblStruct type="article"><analytic><title level="a" type="main">Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
<title level="a" type="short">Retention Force of Double Conical Crowns</title>
<author xml:id="author-0000"><persName><forename type="first">Aysegul G.</forename>
<surname>Gurbulak</surname>
<roleName type="degree">DDS, PhD</roleName>
</persName>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey<address><country key="TR"></country>
</address>
</affiliation>
</author>
<author xml:id="author-0001"><persName><forename type="first">Kerem</forename>
<surname>Kilic</surname>
<roleName type="degree">DDS, PhD</roleName>
</persName>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey<address><country key="TR"></country>
</address>
</affiliation>
</author>
<author xml:id="author-0002"><persName><forename type="first">Zekiye</forename>
<surname>Eroğlu</surname>
<roleName type="degree">DDS, PhD</roleName>
</persName>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey<address><country key="TR"></country>
</address>
</affiliation>
</author>
<author xml:id="author-0003"><persName><forename type="first">Eyup</forename>
<surname>Gercekcioglu</surname>
<roleName type="degree">DDS, PhD</roleName>
</persName>
<affiliation>Department of Material Science and Engineering, Erciyes University, Faculty of Engineering, Kayseri, Turkey<address><country key="TR"></country>
</address>
</affiliation>
</author>
<author xml:id="author-0004"><persName><forename type="first">Bulent</forename>
<surname>Kesim</surname>
<roleName type="degree">DDS, PhD</roleName>
</persName>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey<address><country key="TR"></country>
</address>
</affiliation>
</author>
<idno type="istex">699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2</idno>
<idno type="ark">ark:/67375/WNG-HHZ7DP6N-4</idno>
<idno type="DOI">10.1111/j.1532-849X.2012.00897.x</idno>
<idno type="unit">JOPR897</idno>
<idno type="toTypesetVersion">file:JOPR.JOPR897.pdf</idno>
</analytic>
<monogr><title level="j" type="main">Journal of Prosthodontics</title>
<title level="j" type="alt">JOURNAL OF PROSTHODONTICS</title>
<idno type="pISSN">1059-941X</idno>
<idno type="eISSN">1532-849X</idno>
<idno type="book-DOI">10.1111/(ISSN)1532-849X</idno>
<idno type="book-part-DOI">10.1111/jopr.2013.22.issue-1</idno>
<idno type="product">JOPR</idno>
<idno type="publisherDivision">ST</idno>
<imprint><biblScope unit="vol">22</biblScope>
<biblScope unit="issue">1</biblScope>
<biblScope unit="page" from="63">63</biblScope>
<biblScope unit="page" to="68">68</biblScope>
<biblScope unit="page-count">6</biblScope>
<publisher>Blackwell Publishing Inc</publisher>
<pubPlace>Malden, USA</pubPlace>
<date type="published" when="2013-01"></date>
</imprint>
</monogr>
</biblStruct>
</sourceDesc>
</fileDesc>
<profileDesc><abstract xml:lang="en" style="main"><head>Abstract</head>
<p><hi rend="bold">Purpose:</hi>
 The aim of this study was to measure the in vitro retention force of double conical crowns fabricated using primary galvanoforming and secondary casting techniques and those fabricated using primary casting and secondary galvanoforming techniques under simulated clinical conditions before and after a wear test.</p>
<p><hi rend="bold">Materials and Methods:</hi>
 Primary galvanoformed crowns (n = 10) with non‐noble secondary crowns (n = 10; group A) and primary non‐noble crowns (n = 10) with secondary galvanoformed crowns (n = 10; group B) were fabricated. Each primary and secondary crown was embedded in acrylic resin and weighed with a digital balance. Retention forces were then measured using a universal testing device. To simulate wear, specimens were inserted and separated horizonatally 3285 times in wear equipment with artificial saliva. Retention forces and weights of the double crowns were then remeasured. Data were analyzed using paired <hi rend="italic">t</hi>
‐tests and Wilcoxon tests, and the groups were compared using Mann–Whitney <hi rend="italic">U‐</hi>
tests.</p>
<p><hi rend="bold">Results:</hi>
 In group A, the wear test had a significant influence on the retentive force (<hi rend="italic">p</hi>
 < 0.05), but wear produced no significant difference in weight (<hi rend="italic">p</hi>
 > 0.05). In group B, the wear test had a significant influence on the retentive force (<hi rend="italic">p</hi>
 < 0.05), and wear produced a significant difference in weight (<hi rend="italic">p</hi>
 < 0.05).</p>
<p><hi rend="bold">Conclusions:</hi>
 The results of this study indicated that the use of different combinations of galvanoforming and casting techniques in the fabrication of conical crowns significantly affected retention force.</p>
</abstract>
<textClass><keywords xml:lang="en"><term xml:id="k1">Double conus crown</term>
<term xml:id="k2">galvanoforming</term>
<term xml:id="k3">reciprocating wear test</term>
<term xml:id="k4">retentive force</term>
<term xml:id="k5">telescopic denture</term>
</keywords>
<keywords rend="tocHeading1"><term>Original Articles</term>
</keywords>
</textClass>
<langUsage><language ident="en"></language>
</langUsage>
</profileDesc>
</teiHeader>
</istex:fulltextTEI>
<json:item><extension>txt</extension>
<original>false</original>
<mimetype>text/plain</mimetype>
<uri>https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/fulltext/txt</uri>
</json:item>
</fulltext>
<metadata><istex:metadataXml wicri:clean="Wiley, elements deleted: body"><istex:xmlDeclaration>version="1.0" encoding="UTF-8" standalone="yes"</istex:xmlDeclaration>
<istex:document><component version="2.0" type="serialArticle" xml:lang="en"><header><publicationMeta level="product"><publisherInfo><publisherName>Blackwell Publishing Inc</publisherName>
<publisherLoc>Malden, USA</publisherLoc>
</publisherInfo>
<doi origin="wiley" registered="yes">10.1111/(ISSN)1532-849X</doi>
<issn type="print">1059-941X</issn>
<issn type="electronic">1532-849X</issn>
<idGroup><id type="product" value="JOPR"></id>
<id type="publisherDivision" value="ST"></id>
</idGroup>
<titleGroup><title type="main" sort="JOURNAL OF PROSTHODONTICS">Journal of Prosthodontics</title>
<title type="subtitle">Implant, Esthetic and Reconstructive Dentistry</title>
</titleGroup>
</publicationMeta>
<publicationMeta level="part" position="01101"><doi origin="wiley">10.1111/jopr.2013.22.issue-1</doi>
<numberingGroup><numbering type="journalVolume" number="22">22</numbering>
<numbering type="journalIssue" number="1">1</numbering>
</numberingGroup>
<coverDate startDate="2013-01">January 2013</coverDate>
</publicationMeta>
<publicationMeta level="unit" type="article" position="11" status="forIssue"><doi origin="wiley">10.1111/j.1532-849X.2012.00897.x</doi>
<idGroup><id type="unit" value="JOPR897"></id>
</idGroup>
<countGroup><count type="pageTotal" number="6"></count>
</countGroup>
<titleGroup><title type="tocHeading1">Original Articles</title>
</titleGroup>
<copyright>© 2012 by the American College of Prosthodontists</copyright>
<eventGroup><event type="xmlConverted" agent="Converter:BPG_TO_WML3G version:3.1.9 mode:FullText" date="2013-01-08"></event>
<event type="publishedOnlineEarlyUnpaginated" date="2012-08-28"></event>
<event type="firstOnline" date="2012-08-28"></event>
<event type="publishedOnlineFinalForm" date="2013-01-08"></event>
<event type="xmlConverted" agent="Converter:WILEY_ML3G_TO_WILEY_ML3GV2 version:3.8.8" date="2014-01-31"></event>
<event type="xmlConverted" agent="Converter:WML3G_To_WML3G version:4.6.4 mode:FullText" date="2015-10-03"></event>
</eventGroup>
<numberingGroup><numbering type="pageFirst" number="63">63</numbering>
<numbering type="pageLast" number="68">68</numbering>
</numberingGroup>
<correspondenceTo>Kerem Kilic, Erciyes University Faculty of Dentistry, Dept. of Prosthodontics, Talas/ Kayseri, 38039, Turkey. E‐mail: <email>dtkeremkilic@hotmail.com</email>
</correspondenceTo>
<linkGroup><link type="toTypesetVersion" href="file:JOPR.JOPR897.pdf"></link>
</linkGroup>
</publicationMeta>
<contentMeta><unparsedEditorialHistory>Accepted March 24, 2012</unparsedEditorialHistory>
<countGroup><count type="figureTotal" number="3"></count>
<count type="tableTotal" number="2"></count>
<count type="formulaTotal" number="0"></count>
<count type="referenceTotal" number="28"></count>
<count type="linksCrossRef" number="48"></count>
</countGroup>
<titleGroup><title type="main">Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
<title type="shortAuthors">Gurbulak <i>et al</i>
</title>
<title type="short">Retention Force of Double Conical Crowns</title>
</titleGroup>
<creators><creator creatorRole="author" xml:id="cr1" affiliationRef="#a1"><personName><givenNames>Aysegul G.</givenNames>
<familyName>Gurbulak</familyName>
<degrees>DDS, PhD</degrees>
</personName>
</creator>
<creator creatorRole="author" xml:id="cr2" affiliationRef="#a1"><personName><givenNames>Kerem</givenNames>
<familyName>Kilic</familyName>
<degrees>DDS, PhD</degrees>
</personName>
</creator>
<creator creatorRole="author" xml:id="cr3" affiliationRef="#a1"><personName><givenNames>Zekiye</givenNames>
<familyName>Eroğlu</familyName>
<degrees>DDS, PhD</degrees>
</personName>
</creator>
<creator creatorRole="author" xml:id="cr4" affiliationRef="#a2"><personName><givenNames>Eyup</givenNames>
<familyName>Gercekcioglu</familyName>
<degrees>DDS, PhD</degrees>
</personName>
</creator>
<creator creatorRole="author" xml:id="cr5" affiliationRef="#a1"><personName><givenNames>Bulent</givenNames>
<familyName>Kesim</familyName>
<degrees>DDS, PhD</degrees>
</personName>
</creator>
</creators>
<affiliationGroup><affiliation xml:id="a1" countryCode="TR"><unparsedAffiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</unparsedAffiliation>
</affiliation>
<affiliation xml:id="a2" countryCode="TR"><unparsedAffiliation>Department of Material Science and Engineering, Erciyes University, Faculty of Engineering, Kayseri, Turkey</unparsedAffiliation>
</affiliation>
</affiliationGroup>
<keywordGroup xml:lang="en"><keyword xml:id="k1">Double conus crown</keyword>
<keyword xml:id="k2">galvanoforming</keyword>
<keyword xml:id="k3">reciprocating wear test</keyword>
<keyword xml:id="k4">retentive force</keyword>
<keyword xml:id="k5">telescopic denture</keyword>
</keywordGroup>
<abstractGroup><abstract type="main" xml:lang="en"><title type="main">Abstract</title>
<p><b>Purpose:</b>
 The aim of this study was to measure the in vitro retention force of double conical crowns fabricated using primary galvanoforming and secondary casting techniques and those fabricated using primary casting and secondary galvanoforming techniques under simulated clinical conditions before and after a wear test.</p>
<p><b>Materials and Methods:</b>
 Primary galvanoformed crowns (n = 10) with non‐noble secondary crowns (n = 10; group A) and primary non‐noble crowns (n = 10) with secondary galvanoformed crowns (n = 10; group B) were fabricated. Each primary and secondary crown was embedded in acrylic resin and weighed with a digital balance. Retention forces were then measured using a universal testing device. To simulate wear, specimens were inserted and separated horizonatally 3285 times in wear equipment with artificial saliva. Retention forces and weights of the double crowns were then remeasured. Data were analyzed using paired <i>t</i>
‐tests and Wilcoxon tests, and the groups were compared using Mann–Whitney <i>U‐</i>
tests.</p>
<p><b>Results:</b>
 In group A, the wear test had a significant influence on the retentive force (<i>p</i>
 < 0.05), but wear produced no significant difference in weight (<i>p</i>
 > 0.05). In group B, the wear test had a significant influence on the retentive force (<i>p</i>
 < 0.05), and wear produced a significant difference in weight (<i>p</i>
 < 0.05).</p>
<p><b>Conclusions:</b>
 The results of this study indicated that the use of different combinations of galvanoforming and casting techniques in the fabrication of conical crowns significantly affected retention force.</p>
</abstract>
</abstractGroup>
</contentMeta>
<noteGroup><note xml:id="n-fnt-1"><p><i>Financial support from the Erciyes University Department of Scientific Research Projects (DHA 05–02).</i>
</p>
</note>
<note xml:id="n-fnt-2"><p><i>The authors deny any conflicts of interest.</i>
</p>
</note>
</noteGroup>
</header>
</component>
</istex:document>
</istex:metadataXml>
<mods version="3.6"><titleInfo lang="en"><title>Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
</titleInfo>
<titleInfo type="abbreviated" lang="en"><title>Retention Force of Double Conical Crowns</title>
</titleInfo>
<titleInfo type="alternative" contentType="CDATA" lang="en"><title>Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique</title>
</titleInfo>
<name type="personal"><namePart type="given">Aysegul G.</namePart>
<namePart type="family">Gurbulak</namePart>
<namePart type="termsOfAddress">DDS, PhD</namePart>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Kerem</namePart>
<namePart type="family">Kilic</namePart>
<namePart type="termsOfAddress">DDS, PhD</namePart>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Zekiye</namePart>
<namePart type="family">Eroğlu</namePart>
<namePart type="termsOfAddress">DDS, PhD</namePart>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Eyup</namePart>
<namePart type="family">Gercekcioglu</namePart>
<namePart type="termsOfAddress">DDS, PhD</namePart>
<affiliation>Department of Material Science and Engineering, Erciyes University, Faculty of Engineering, Kayseri, Turkey</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Bulent</namePart>
<namePart type="family">Kesim</namePart>
<namePart type="termsOfAddress">DDS, PhD</namePart>
<affiliation>Department of Prosthdontics, Erciyes University Faculty of Dentistry, Kayseri, Turkey</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<typeOfResource>text</typeOfResource>
<genre type="article" displayLabel="article" authority="ISTEX" authorityURI="https://content-type.data.istex.fr" valueURI="https://content-type.data.istex.fr/ark:/67375/XTP-6N5SZHKN-D">article</genre>
<originInfo><publisher>Blackwell Publishing Inc</publisher>
<place><placeTerm type="text">Malden, USA</placeTerm>
</place>
<dateIssued encoding="w3cdtf">2013-01</dateIssued>
<edition>Accepted March 24, 2012</edition>
<copyrightDate encoding="w3cdtf">2013</copyrightDate>
</originInfo>
<language><languageTerm type="code" authority="rfc3066">en</languageTerm>
<languageTerm type="code" authority="iso639-2b">eng</languageTerm>
</language>
<physicalDescription><extent unit="figures">3</extent>
<extent unit="tables">2</extent>
<extent unit="formulas">0</extent>
<extent unit="references">28</extent>
<extent unit="linksCrossRef">48</extent>
</physicalDescription>
<abstract>Purpose: The aim of this study was to measure the in vitro retention force of double conical crowns fabricated using primary galvanoforming and secondary casting techniques and those fabricated using primary casting and secondary galvanoforming techniques under simulated clinical conditions before and after a wear test.</abstract>
<abstract>Materials and Methods: Primary galvanoformed crowns (n = 10) with non‐noble secondary crowns (n = 10; group A) and primary non‐noble crowns (n = 10) with secondary galvanoformed crowns (n = 10; group B) were fabricated. Each primary and secondary crown was embedded in acrylic resin and weighed with a digital balance. Retention forces were then measured using a universal testing device. To simulate wear, specimens were inserted and separated horizonatally 3285 times in wear equipment with artificial saliva. Retention forces and weights of the double crowns were then remeasured. Data were analyzed using paired t‐tests and Wilcoxon tests, and the groups were compared using Mann–Whitney U‐tests.</abstract>
<abstract>Results: In group A, the wear test had a significant influence on the retentive force (p < 0.05), but wear produced no significant difference in weight (p > 0.05). In group B, the wear test had a significant influence on the retentive force (p < 0.05), and wear produced a significant difference in weight (p < 0.05).</abstract>
<abstract>Conclusions: The results of this study indicated that the use of different combinations of galvanoforming and casting techniques in the fabrication of conical crowns significantly affected retention force.</abstract>
<subject lang="en"><genre>keywords</genre>
<topic>Double conus crown</topic>
<topic>galvanoforming</topic>
<topic>reciprocating wear test</topic>
<topic>retentive force</topic>
<topic>telescopic denture</topic>
</subject>
<relatedItem type="host"><titleInfo><title>Journal of Prosthodontics</title>
<subTitle>Implant, Esthetic and Reconstructive Dentistry</subTitle>
</titleInfo>
<genre type="journal" authority="ISTEX" authorityURI="https://publication-type.data.istex.fr" valueURI="https://publication-type.data.istex.fr/ark:/67375/JMC-0GLKJH51-B">journal</genre>
<identifier type="ISSN">1059-941X</identifier>
<identifier type="eISSN">1532-849X</identifier>
<identifier type="DOI">10.1111/(ISSN)1532-849X</identifier>
<identifier type="PublisherID">JOPR</identifier>
<part><date>2013</date>
<detail type="volume"><caption>vol.</caption>
<number>22</number>
</detail>
<detail type="issue"><caption>no.</caption>
<number>1</number>
</detail>
<extent unit="pages"><start>63</start>
<end>68</end>
<total>6</total>
</extent>
</part>
</relatedItem>
<identifier type="istex">699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2</identifier>
<identifier type="ark">ark:/67375/WNG-HHZ7DP6N-4</identifier>
<identifier type="DOI">10.1111/j.1532-849X.2012.00897.x</identifier>
<identifier type="ArticleID">JOPR897</identifier>
<accessCondition type="use and reproduction" contentType="copyright">© 2012 by the American College of Prosthodontists</accessCondition>
<recordInfo><recordContentSource authority="ISTEX" authorityURI="https://loaded-corpus.data.istex.fr" valueURI="https://loaded-corpus.data.istex.fr/ark:/67375/XBH-L0C46X92-X">wiley</recordContentSource>
<recordOrigin>Blackwell Publishing Inc</recordOrigin>
</recordInfo>
</mods>
<json:item><extension>json</extension>
<original>false</original>
<mimetype>application/json</mimetype>
<uri>https://api.istex.fr/document/699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2/metadata/json</uri>
</json:item>
</metadata>
<serie></serie>
</istex>
</record>

Pour manipuler ce document sous Unix (Dilib)

EXPLOR_STEP=$WICRI_ROOT/Wicri/Santé/explor/EdenteV2/Data/Istex/Corpus

HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 003423 | SxmlIndent | more

HfdSelect -h $EXPLOR_AREA/Data/Istex/Corpus/biblio.hfd -nk 003423 | SxmlIndent | more

Pour mettre un lien sur cette page dans le réseau Wicri

{{Explor lien
   |wiki=    Wicri/Santé
   |area=    EdenteV2
   |flux=    Istex
   |étape=   Corpus
   |type=    RBID
   |clé=     ISTEX:699FA9A8A9CD49D779F6B194CC4BE5AFE0666DB2
   |texte=   Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique
}}

This area was generated with Dilib version V0.6.32.
Data generation: Thu Nov 30 15:26:48 2017. Site generation: Tue Mar 8 16:36:20 2022

	Serveur d'exploration sur le patient édenté
	Attention, ce site est en cours de développement ! Attention, site généré par des moyens informatiques à partir de corpus bruts. Les informations ne sont donc pas validées.

Serveur d'exploration sur le patient édenté

Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique

Evaluation of the Retention Force of Double Conical Crowns Used in Combination with a Galvanoforming and Casting Fabrication Technique

Source :

English descriptors

Abstract

Links to Exploration step

Le document en format XML

Pour manipuler ce document sous Unix (Dilib)

Pour mettre un lien sur cette page dans le réseau Wicri