The role of carbon during oxidation of chromium PVD coatings on iron substrates
Identifieur interne : 000A42 ( PascalFrancis/Corpus ); précédent : 000A41; suivant : 000A43The role of carbon during oxidation of chromium PVD coatings on iron substrates
Auteurs : S. Beauvais-Reveillon ; A. M. Huntz ; C. Severac ; G. Moulin ; E. Beauprez ; G. RautureauSource :
- Corrosion science [ 0010-938X ] ; 1995.
Descripteurs français
- Pascal (Inist)
English descriptors
- KwdEn :
Abstract
Two distinct iron substrates (pure iron and iron containing 0.3 wt% of carbon) have been protected by chromium using physical vapor deposition. The oxidation behaviour of the Cr coating in oxygen at 700 °C depends on the iron grade, due to the influence of carbon. The study shows that carbon can be dissipated into the surrounding atmosphere, depending on its stability in the substrate and on the nature of the atmosphere (confined or dynamic oxidizing atmosphere). Carbide precipitation in the coating, near the oxide interface, decreases the oxidation rate. There is no large influence of the nature of the substrate on oxygen diffusion into the outer part of the Cr2O3 layer. Oxygen diffuses preferentially via interfaces, with a diffusion coefficient of 10-14 cm2s-1. In the chromium coating, there is a significant difference in oxygen penetration, depending on the grade of iron. Carbon incorporation into the coating is greater with the pure iron substrate than with the substrate made of iron containing 0.3 wt% carbon, and the presence of carbon in the coating decreases the oxygen diffusion, particularly along grain-boundaries : thus Dgb(O→Cr/Fe)=6.2 x 10-13 cm2s-1 and Dgb(O→Cr/Fe+C)=2.2 x 10-12 cm2s-1.
Notice en format standard (ISO 2709)
Pour connaître la documentation sur le format Inist Standard.
pA |
|
---|
Format Inist (serveur)
NO : | PASCAL 95-0578477 INIST |
---|---|
ET : | The role of carbon during oxidation of chromium PVD coatings on iron substrates |
AU : | BEAUVAIS-REVEILLON (S.); HUNTZ (A. M.); SEVERAC (C.); MOULIN (G.); BEAUPREZ (E.); RAUTUREAU (G.) |
AF : | CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale/91405 Orsay/France (1 aut., 2 aut., 3 aut., 4 aut.); CREA/PS, ETCA/94114 Acrueil/France (5 aut., 6 aut.) |
DT : | Publication en série; Niveau analytique |
SO : | Corrosion science; ISSN 0010-938X; Coden CRRSAA; Royaume-Uni; Da. 1995; Vol. 37; No. 11; Pp. 1721-1737; Bibl. 15 ref. |
LA : | Anglais |
EA : | Two distinct iron substrates (pure iron and iron containing 0.3 wt% of carbon) have been protected by chromium using physical vapor deposition. The oxidation behaviour of the Cr coating in oxygen at 700 °C depends on the iron grade, due to the influence of carbon. The study shows that carbon can be dissipated into the surrounding atmosphere, depending on its stability in the substrate and on the nature of the atmosphere (confined or dynamic oxidizing atmosphere). Carbide precipitation in the coating, near the oxide interface, decreases the oxidation rate. There is no large influence of the nature of the substrate on oxygen diffusion into the outer part of the Cr2O3 layer. Oxygen diffuses preferentially via interfaces, with a diffusion coefficient of 10-14 cm2s-1. In the chromium coating, there is a significant difference in oxygen penetration, depending on the grade of iron. Carbon incorporation into the coating is greater with the pure iron substrate than with the substrate made of iron containing 0.3 wt% carbon, and the presence of carbon in the coating decreases the oxygen diffusion, particularly along grain-boundaries : thus Dgb(O→Cr/Fe)=6.2 x 10-13 cm2s-1 and Dgb(O→Cr/Fe+C)=2.2 x 10-12 cm2s-1. |
CC : | 001D11E02; 240 |
FD : | Oxydation; Dépôt physique phase vapeur; Revêtement métallique; Oxygène; Vitesse corrosion; Diffusion; Couche oxyde; Carbone; Epaisseur couche; Fer; Chrome; Corrosion |
ED : | Oxidation; Physical vapor deposition; Metal coating; Oxygen; Corrosion rate; Diffusion; Oxide layer; Carbon; Layer thickness; Iron; Chromium; Corrosion |
GD : | Oxidation; Physikalisches Aufdampfen; Metallischer Ueberzug; Sauerstoff; Korrosionsgeschwindigkeit; Diffusion; Oxidschicht; Kohlenstoff; Schichtdicke; Eisen; Chrom; Korrosion |
SD : | Oxidación; Deposición física fase vapor; Revestimiento metálico; Oxígeno; Velocidad corrosión; Difusión; Capa óxido; Carbono; Espesor capa; Hierro; Cromo; Corrosión |
LO : | INIST-9409.354000050399960040 |
ID : | 95-0578477 |
Links to Exploration step
Pascal:95-0578477Le document en format XML
<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en" level="a">The role of carbon during oxidation of chromium PVD coatings on iron substrates</title>
<author><name sortKey="Beauvais Reveillon, S" sort="Beauvais Reveillon, S" uniqKey="Beauvais Reveillon S" first="S." last="Beauvais-Reveillon">S. Beauvais-Reveillon</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Huntz, A M" sort="Huntz, A M" uniqKey="Huntz A" first="A. M." last="Huntz">A. M. Huntz</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Severac, C" sort="Severac, C" uniqKey="Severac C" first="C." last="Severac">C. Severac</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Moulin, G" sort="Moulin, G" uniqKey="Moulin G" first="G." last="Moulin">G. Moulin</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Beauprez, E" sort="Beauprez, E" uniqKey="Beauprez E" first="E." last="Beauprez">E. Beauprez</name>
<affiliation><inist:fA14 i1="02"><s1>CREA/PS, ETCA</s1>
<s2>94114 Acrueil</s2>
<s3>FRA</s3>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Rautureau, G" sort="Rautureau, G" uniqKey="Rautureau G" first="G." last="Rautureau">G. Rautureau</name>
<affiliation><inist:fA14 i1="02"><s1>CREA/PS, ETCA</s1>
<s2>94114 Acrueil</s2>
<s3>FRA</s3>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
</titleStmt>
<publicationStmt><idno type="wicri:source">INIST</idno>
<idno type="inist">95-0578477</idno>
<date when="1995">1995</date>
<idno type="stanalyst">PASCAL 95-0578477 INIST</idno>
<idno type="RBID">Pascal:95-0578477</idno>
<idno type="wicri:Area/PascalFrancis/Corpus">000A42</idno>
</publicationStmt>
<sourceDesc><biblStruct><analytic><title xml:lang="en" level="a">The role of carbon during oxidation of chromium PVD coatings on iron substrates</title>
<author><name sortKey="Beauvais Reveillon, S" sort="Beauvais Reveillon, S" uniqKey="Beauvais Reveillon S" first="S." last="Beauvais-Reveillon">S. Beauvais-Reveillon</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Huntz, A M" sort="Huntz, A M" uniqKey="Huntz A" first="A. M." last="Huntz">A. M. Huntz</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Severac, C" sort="Severac, C" uniqKey="Severac C" first="C." last="Severac">C. Severac</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Moulin, G" sort="Moulin, G" uniqKey="Moulin G" first="G." last="Moulin">G. Moulin</name>
<affiliation><inist:fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Beauprez, E" sort="Beauprez, E" uniqKey="Beauprez E" first="E." last="Beauprez">E. Beauprez</name>
<affiliation><inist:fA14 i1="02"><s1>CREA/PS, ETCA</s1>
<s2>94114 Acrueil</s2>
<s3>FRA</s3>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
<author><name sortKey="Rautureau, G" sort="Rautureau, G" uniqKey="Rautureau G" first="G." last="Rautureau">G. Rautureau</name>
<affiliation><inist:fA14 i1="02"><s1>CREA/PS, ETCA</s1>
<s2>94114 Acrueil</s2>
<s3>FRA</s3>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
</affiliation>
</author>
</analytic>
<series><title level="j" type="main">Corrosion science</title>
<title level="j" type="abbreviated">Corros. sci.</title>
<idno type="ISSN">0010-938X</idno>
<imprint><date when="1995">1995</date>
</imprint>
</series>
</biblStruct>
</sourceDesc>
<seriesStmt><title level="j" type="main">Corrosion science</title>
<title level="j" type="abbreviated">Corros. sci.</title>
<idno type="ISSN">0010-938X</idno>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Carbon</term>
<term>Chromium</term>
<term>Corrosion</term>
<term>Corrosion rate</term>
<term>Diffusion</term>
<term>Iron</term>
<term>Layer thickness</term>
<term>Metal coating</term>
<term>Oxidation</term>
<term>Oxide layer</term>
<term>Oxygen</term>
<term>Physical vapor deposition</term>
</keywords>
<keywords scheme="Pascal" xml:lang="fr"><term>Oxydation</term>
<term>Dépôt physique phase vapeur</term>
<term>Revêtement métallique</term>
<term>Oxygène</term>
<term>Vitesse corrosion</term>
<term>Diffusion</term>
<term>Couche oxyde</term>
<term>Carbone</term>
<term>Epaisseur couche</term>
<term>Fer</term>
<term>Chrome</term>
<term>Corrosion</term>
</keywords>
</textClass>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en">Two distinct iron substrates (pure iron and iron containing 0.3 wt% of carbon) have been protected by chromium using physical vapor deposition. The oxidation behaviour of the Cr coating in oxygen at 700 °C depends on the iron grade, due to the influence of carbon. The study shows that carbon can be dissipated into the surrounding atmosphere, depending on its stability in the substrate and on the nature of the atmosphere (confined or dynamic oxidizing atmosphere). Carbide precipitation in the coating, near the oxide interface, decreases the oxidation rate. There is no large influence of the nature of the substrate on oxygen diffusion into the outer part of the Cr<sub>2</sub>
O<sub>3</sub>
layer. Oxygen diffuses preferentially via interfaces, with a diffusion coefficient of 10<sup>-14</sup>
cm<sup>2</sup>
s<sup>-1</sup>
. In the chromium coating, there is a significant difference in oxygen penetration, depending on the grade of iron. Carbon incorporation into the coating is greater with the pure iron substrate than with the substrate made of iron containing 0.3 wt% carbon, and the presence of carbon in the coating decreases the oxygen diffusion, particularly along grain-boundaries : thus D<sub>gb</sub>
(O→Cr/Fe)=6.2 x 10<sup>-13</sup>
cm<sup>2</sup>
s<sup>-1</sup>
and D<sub>gb</sub>
(O→Cr/Fe+C)=2.2 x 10<sup>-12</sup>
cm<sup>2</sup>
s<sup>-1</sup>
.</div>
</front>
</TEI>
<inist><standard h6="B"><pA><fA01 i1="01" i2="1"><s0>0010-938X</s0>
</fA01>
<fA02 i1="01"><s0>CRRSAA</s0>
</fA02>
<fA03 i2="1"><s0>Corros. sci.</s0>
</fA03>
<fA05><s2>37</s2>
</fA05>
<fA06><s2>11</s2>
</fA06>
<fA08 i1="01" i2="1" l="ENG"><s1>The role of carbon during oxidation of chromium PVD coatings on iron substrates</s1>
</fA08>
<fA11 i1="01" i2="1"><s1>BEAUVAIS-REVEILLON (S.)</s1>
</fA11>
<fA11 i1="02" i2="1"><s1>HUNTZ (A. M.)</s1>
</fA11>
<fA11 i1="03" i2="1"><s1>SEVERAC (C.)</s1>
</fA11>
<fA11 i1="04" i2="1"><s1>MOULIN (G.)</s1>
</fA11>
<fA11 i1="05" i2="1"><s1>BEAUPREZ (E.)</s1>
</fA11>
<fA11 i1="06" i2="1"><s1>RAUTUREAU (G.)</s1>
</fA11>
<fA14 i1="01"><s1>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale</s1>
<s2>91405 Orsay</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>4 aut.</sZ>
</fA14>
<fA14 i1="02"><s1>CREA/PS, ETCA</s1>
<s2>94114 Acrueil</s2>
<s3>FRA</s3>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
</fA14>
<fA20><s1>1721-1737</s1>
</fA20>
<fA21><s1>1995</s1>
</fA21>
<fA23 i1="01"><s0>ENG</s0>
</fA23>
<fA43 i1="01"><s1>INIST</s1>
<s2>9409</s2>
<s5>354000050399960040</s5>
</fA43>
<fA44><s0>0000</s0>
</fA44>
<fA45><s0>15 ref.</s0>
</fA45>
<fA47 i1="01" i2="1"><s0>95-0578477</s0>
</fA47>
<fA60><s1>P</s1>
</fA60>
<fA61><s0>A</s0>
</fA61>
<fA64 i1="01" i2="1"><s0>Corrosion science</s0>
</fA64>
<fA66 i1="01"><s0>GBR</s0>
</fA66>
<fC01 i1="01" l="ENG"><s0>Two distinct iron substrates (pure iron and iron containing 0.3 wt% of carbon) have been protected by chromium using physical vapor deposition. The oxidation behaviour of the Cr coating in oxygen at 700 °C depends on the iron grade, due to the influence of carbon. The study shows that carbon can be dissipated into the surrounding atmosphere, depending on its stability in the substrate and on the nature of the atmosphere (confined or dynamic oxidizing atmosphere). Carbide precipitation in the coating, near the oxide interface, decreases the oxidation rate. There is no large influence of the nature of the substrate on oxygen diffusion into the outer part of the Cr<sub>2</sub>
O<sub>3</sub>
layer. Oxygen diffuses preferentially via interfaces, with a diffusion coefficient of 10<sup>-14</sup>
cm<sup>2</sup>
s<sup>-1</sup>
. In the chromium coating, there is a significant difference in oxygen penetration, depending on the grade of iron. Carbon incorporation into the coating is greater with the pure iron substrate than with the substrate made of iron containing 0.3 wt% carbon, and the presence of carbon in the coating decreases the oxygen diffusion, particularly along grain-boundaries : thus D<sub>gb</sub>
(O→Cr/Fe)=6.2 x 10<sup>-13</sup>
cm<sup>2</sup>
s<sup>-1</sup>
and D<sub>gb</sub>
(O→Cr/Fe+C)=2.2 x 10<sup>-12</sup>
cm<sup>2</sup>
s<sup>-1</sup>
.</s0>
</fC01>
<fC02 i1="01" i2="1"><s0>001D11E02</s0>
</fC02>
<fC02 i1="02" i2="X"><s0>240</s0>
</fC02>
<fC03 i1="01" i2="X" l="FRE"><s0>Oxydation</s0>
<s5>55</s5>
</fC03>
<fC03 i1="01" i2="X" l="ENG"><s0>Oxidation</s0>
<s5>55</s5>
</fC03>
<fC03 i1="01" i2="X" l="GER"><s0>Oxidation</s0>
<s5>55</s5>
</fC03>
<fC03 i1="01" i2="X" l="SPA"><s0>Oxidación</s0>
<s5>55</s5>
</fC03>
<fC03 i1="02" i2="X" l="FRE"><s0>Dépôt physique phase vapeur</s0>
<s5>56</s5>
</fC03>
<fC03 i1="02" i2="X" l="ENG"><s0>Physical vapor deposition</s0>
<s5>56</s5>
</fC03>
<fC03 i1="02" i2="X" l="GER"><s0>Physikalisches Aufdampfen</s0>
<s5>56</s5>
</fC03>
<fC03 i1="02" i2="X" l="SPA"><s0>Deposición física fase vapor</s0>
<s5>56</s5>
</fC03>
<fC03 i1="03" i2="X" l="FRE"><s0>Revêtement métallique</s0>
<s5>57</s5>
</fC03>
<fC03 i1="03" i2="X" l="ENG"><s0>Metal coating</s0>
<s5>57</s5>
</fC03>
<fC03 i1="03" i2="X" l="GER"><s0>Metallischer Ueberzug</s0>
<s5>57</s5>
</fC03>
<fC03 i1="03" i2="X" l="SPA"><s0>Revestimiento metálico</s0>
<s5>57</s5>
</fC03>
<fC03 i1="04" i2="X" l="FRE"><s0>Oxygène</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>58</s5>
</fC03>
<fC03 i1="04" i2="X" l="ENG"><s0>Oxygen</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>58</s5>
</fC03>
<fC03 i1="04" i2="X" l="GER"><s0>Sauerstoff</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>58</s5>
</fC03>
<fC03 i1="04" i2="X" l="SPA"><s0>Oxígeno</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>58</s5>
</fC03>
<fC03 i1="05" i2="X" l="FRE"><s0>Vitesse corrosion</s0>
<s5>59</s5>
</fC03>
<fC03 i1="05" i2="X" l="ENG"><s0>Corrosion rate</s0>
<s5>59</s5>
</fC03>
<fC03 i1="05" i2="X" l="GER"><s0>Korrosionsgeschwindigkeit</s0>
<s5>59</s5>
</fC03>
<fC03 i1="05" i2="X" l="SPA"><s0>Velocidad corrosión</s0>
<s5>59</s5>
</fC03>
<fC03 i1="06" i2="X" l="FRE"><s0>Diffusion</s0>
<s5>60</s5>
</fC03>
<fC03 i1="06" i2="X" l="ENG"><s0>Diffusion</s0>
<s5>60</s5>
</fC03>
<fC03 i1="06" i2="X" l="GER"><s0>Diffusion</s0>
<s5>60</s5>
</fC03>
<fC03 i1="06" i2="X" l="SPA"><s0>Difusión</s0>
<s5>60</s5>
</fC03>
<fC03 i1="07" i2="X" l="FRE"><s0>Couche oxyde</s0>
<s5>61</s5>
</fC03>
<fC03 i1="07" i2="X" l="ENG"><s0>Oxide layer</s0>
<s5>61</s5>
</fC03>
<fC03 i1="07" i2="X" l="GER"><s0>Oxidschicht</s0>
<s5>61</s5>
</fC03>
<fC03 i1="07" i2="X" l="SPA"><s0>Capa óxido</s0>
<s5>61</s5>
</fC03>
<fC03 i1="08" i2="X" l="FRE"><s0>Carbone</s0>
<s2>NC</s2>
<s5>62</s5>
</fC03>
<fC03 i1="08" i2="X" l="ENG"><s0>Carbon</s0>
<s2>NC</s2>
<s5>62</s5>
</fC03>
<fC03 i1="08" i2="X" l="GER"><s0>Kohlenstoff</s0>
<s2>NC</s2>
<s5>62</s5>
</fC03>
<fC03 i1="08" i2="X" l="SPA"><s0>Carbono</s0>
<s2>NC</s2>
<s5>62</s5>
</fC03>
<fC03 i1="09" i2="X" l="FRE"><s0>Epaisseur couche</s0>
<s5>63</s5>
</fC03>
<fC03 i1="09" i2="X" l="ENG"><s0>Layer thickness</s0>
<s5>63</s5>
</fC03>
<fC03 i1="09" i2="X" l="GER"><s0>Schichtdicke</s0>
<s5>63</s5>
</fC03>
<fC03 i1="09" i2="X" l="SPA"><s0>Espesor capa</s0>
<s5>63</s5>
</fC03>
<fC03 i1="10" i2="X" l="FRE"><s0>Fer</s0>
<s1>SUB</s1>
<s2>NC</s2>
<s5>65</s5>
</fC03>
<fC03 i1="10" i2="X" l="ENG"><s0>Iron</s0>
<s1>SUB</s1>
<s2>NC</s2>
<s5>65</s5>
</fC03>
<fC03 i1="10" i2="X" l="GER"><s0>Eisen</s0>
<s1>SUB</s1>
<s2>NC</s2>
<s5>65</s5>
</fC03>
<fC03 i1="10" i2="X" l="SPA"><s0>Hierro</s0>
<s1>SUB</s1>
<s2>NC</s2>
<s5>65</s5>
</fC03>
<fC03 i1="11" i2="X" l="FRE"><s0>Chrome</s0>
<s1>SEC</s1>
<s2>NC</s2>
<s2>FX</s2>
<s5>66</s5>
</fC03>
<fC03 i1="11" i2="X" l="ENG"><s0>Chromium</s0>
<s1>SEC</s1>
<s2>NC</s2>
<s2>FX</s2>
<s5>66</s5>
</fC03>
<fC03 i1="11" i2="X" l="GER"><s0>Chrom</s0>
<s1>SEC</s1>
<s2>NC</s2>
<s2>FX</s2>
<s5>66</s5>
</fC03>
<fC03 i1="11" i2="X" l="SPA"><s0>Cromo</s0>
<s1>SEC</s1>
<s2>NC</s2>
<s2>FX</s2>
<s5>66</s5>
</fC03>
<fC03 i1="12" i2="X" l="FRE"><s0>Corrosion</s0>
<s5>74</s5>
</fC03>
<fC03 i1="12" i2="X" l="ENG"><s0>Corrosion</s0>
<s5>74</s5>
</fC03>
<fC03 i1="12" i2="X" l="GER"><s0>Korrosion</s0>
<s5>74</s5>
</fC03>
<fC03 i1="12" i2="X" l="SPA"><s0>Corrosión</s0>
<s5>74</s5>
</fC03>
<fN21><s1>331</s1>
</fN21>
</pA>
</standard>
<server><NO>PASCAL 95-0578477 INIST</NO>
<ET>The role of carbon during oxidation of chromium PVD coatings on iron substrates</ET>
<AU>BEAUVAIS-REVEILLON (S.); HUNTZ (A. M.); SEVERAC (C.); MOULIN (G.); BEAUPREZ (E.); RAUTUREAU (G.)</AU>
<AF>CNRS Univ. Paris XI, inst. sci. matériaux, URA 1107 lab. métallurgie structurale/91405 Orsay/France (1 aut., 2 aut., 3 aut., 4 aut.); CREA/PS, ETCA/94114 Acrueil/France (5 aut., 6 aut.)</AF>
<DT>Publication en série; Niveau analytique</DT>
<SO>Corrosion science; ISSN 0010-938X; Coden CRRSAA; Royaume-Uni; Da. 1995; Vol. 37; No. 11; Pp. 1721-1737; Bibl. 15 ref.</SO>
<LA>Anglais</LA>
<EA>Two distinct iron substrates (pure iron and iron containing 0.3 wt% of carbon) have been protected by chromium using physical vapor deposition. The oxidation behaviour of the Cr coating in oxygen at 700 °C depends on the iron grade, due to the influence of carbon. The study shows that carbon can be dissipated into the surrounding atmosphere, depending on its stability in the substrate and on the nature of the atmosphere (confined or dynamic oxidizing atmosphere). Carbide precipitation in the coating, near the oxide interface, decreases the oxidation rate. There is no large influence of the nature of the substrate on oxygen diffusion into the outer part of the Cr<sub>2</sub>
O<sub>3</sub>
layer. Oxygen diffuses preferentially via interfaces, with a diffusion coefficient of 10<sup>-14</sup>
cm<sup>2</sup>
s<sup>-1</sup>
. In the chromium coating, there is a significant difference in oxygen penetration, depending on the grade of iron. Carbon incorporation into the coating is greater with the pure iron substrate than with the substrate made of iron containing 0.3 wt% carbon, and the presence of carbon in the coating decreases the oxygen diffusion, particularly along grain-boundaries : thus D<sub>gb</sub>
(O→Cr/Fe)=6.2 x 10<sup>-13</sup>
cm<sup>2</sup>
s<sup>-1</sup>
and D<sub>gb</sub>
(O→Cr/Fe+C)=2.2 x 10<sup>-12</sup>
cm<sup>2</sup>
s<sup>-1</sup>
.</EA>
<CC>001D11E02; 240</CC>
<FD>Oxydation; Dépôt physique phase vapeur; Revêtement métallique; Oxygène; Vitesse corrosion; Diffusion; Couche oxyde; Carbone; Epaisseur couche; Fer; Chrome; Corrosion</FD>
<ED>Oxidation; Physical vapor deposition; Metal coating; Oxygen; Corrosion rate; Diffusion; Oxide layer; Carbon; Layer thickness; Iron; Chromium; Corrosion</ED>
<GD>Oxidation; Physikalisches Aufdampfen; Metallischer Ueberzug; Sauerstoff; Korrosionsgeschwindigkeit; Diffusion; Oxidschicht; Kohlenstoff; Schichtdicke; Eisen; Chrom; Korrosion</GD>
<SD>Oxidación; Deposición física fase vapor; Revestimiento metálico; Oxígeno; Velocidad corrosión; Difusión; Capa óxido; Carbono; Espesor capa; Hierro; Cromo; Corrosión</SD>
<LO>INIST-9409.354000050399960040</LO>
<ID>95-0578477</ID>
</server>
</inist>
</record>
Pour manipuler ce document sous Unix (Dilib)
EXPLOR_STEP=$WICRI_ROOT/Ticri/CIDE/explor/OcrV1/Data/PascalFrancis/Corpus
HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 000A42 | SxmlIndent | more
Ou
HfdSelect -h $EXPLOR_AREA/Data/PascalFrancis/Corpus/biblio.hfd -nk 000A42 | SxmlIndent | more
Pour mettre un lien sur cette page dans le réseau Wicri
{{Explor lien |wiki= Ticri/CIDE |area= OcrV1 |flux= PascalFrancis |étape= Corpus |type= RBID |clé= Pascal:95-0578477 |texte= The role of carbon during oxidation of chromium PVD coatings on iron substrates }}
![]() | This area was generated with Dilib version V0.6.32. | ![]() |