IndiumV3, Main, Repository, bibRecord, 004029

High quality transparent conductive electrodes in organic photovoltaic devices

Identifieur interne : 004029 ( Main/Repository ); précédent : 004028; suivant : 004030

High quality transparent conductive electrodes in organic photovoltaic devices

Auteurs : RBID : Pascal:10-0167126

Descripteurs français

Pascal (Inist)
- Dispositif photovoltaïque, Traitement thermique, Conductivité électrique, Dispositif optoélectronique, Propriété électrique, Propriété optique, Résistivité couche, Transmission optique, Spectre absorption, Epaisseur couche, Fullerènes, Cellule solaire, Eclairement, Pulvérisation faisceau ionique, Oxyde d'indium, Oxyde d'étain, Argent, Substrat polymère, C60, 8460J, 7361, 8560, 7350.
Wicri :
- concept : Argent.

English descriptors

KwdEn :
- Absorption spectrum, Electrical conductivity, Electrical properties, Fullerenes, Heat treatment, Illumination, Indium oxide, Ion beam sputtering, Layer thickness, Optical properties, Optical transmission, Optoelectronic device, Photovoltaic cell, Sheet resistivity, Silver, Solar cell, Tin oxide.

Abstract

The use of indium tin oxide (ITO) in conjunction with polymeric substrates requires deposition at low temperatures or room temperature, and with a limited or no thermal treatment. This process results in high resistivity materials. To achieve practical resistivity levels, we replaced ITO, the workhorse in organic optoelectronic devices, with an ITO/Ag/ITO tri-layer anode. This material yielded the desired electrical properties without a significant effect on its optical properties. For example, a sheet resistance of 15 Ω/Δ and an optical transmission of 90% at 550 nm were obtained for a tri-layer film in which thickness of each ITO layer is 50 nm and the Ag layer thickness is 8 nm. The use of these tri-layer anodes in CuPc-C₆₀-based organic solar cells led to an increase in the fill factor under illumination, and thus an improvement of the external power conversion efficiency.

Links toward previous steps (curation, corpus...)

to stream Main, to step Corpus: 004735

Links to Exploration step

Pascal:10-0167126

Le document en format XML

<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en" level="a">High quality transparent conductive electrodes in organic photovoltaic devices</title>
<author><name sortKey="Chakaroun, M" uniqKey="Chakaroun M">M. Chakaroun</name>
<affiliation wicri:level="3"><inist:fA14 i1="01"><s1>XLIM Institute, UMR 6172, Université de Limoges/CNRS, 123 Avenue Albert Thomas</s1>
<s2>87060 Limoges</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
<country>France</country>
<placeName><region type="region" nuts="2">Limousin</region>
<settlement type="city">Limoges</settlement>
</placeName>
</affiliation>
</author>
<author><name sortKey="Lucas, B" uniqKey="Lucas B">B. Lucas</name>
<affiliation wicri:level="3"><inist:fA14 i1="01"><s1>XLIM Institute, UMR 6172, Université de Limoges/CNRS, 123 Avenue Albert Thomas</s1>
<s2>87060 Limoges</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
<country>France</country>
<placeName><region type="region" nuts="2">Limousin</region>
<settlement type="city">Limoges</settlement>
</placeName>
</affiliation>
</author>
<author><name sortKey="Ratier, B" uniqKey="Ratier B">B. Ratier</name>
<affiliation wicri:level="3"><inist:fA14 i1="01"><s1>XLIM Institute, UMR 6172, Université de Limoges/CNRS, 123 Avenue Albert Thomas</s1>
<s2>87060 Limoges</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
<country>France</country>
<placeName><region type="region" nuts="2">Limousin</region>
<settlement type="city">Limoges</settlement>
</placeName>
</affiliation>
</author>
<author><name sortKey="Defranoux, C" uniqKey="Defranoux C">C. Defranoux</name>
<affiliation wicri:level="3"><inist:fA14 i1="02"><s1>SOPRA-SA, 26 rue Pierre Joigneaux</s1>
<s2>92270 Bois-Colombes</s2>
<s3>FRA</s3>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
</inist:fA14>
<country>France</country>
<placeName><region type="region" nuts="2">Île-de-France</region>
<settlement type="city">Bois-Colombes</settlement>
</placeName>
</affiliation>
</author>
<author><name sortKey="Piel, J P" uniqKey="Piel J">J. P. Piel</name>
<affiliation wicri:level="3"><inist:fA14 i1="02"><s1>SOPRA-SA, 26 rue Pierre Joigneaux</s1>
<s2>92270 Bois-Colombes</s2>
<s3>FRA</s3>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
</inist:fA14>
<country>France</country>
<placeName><region type="region" nuts="2">Île-de-France</region>
<settlement type="city">Bois-Colombes</settlement>
</placeName>
</affiliation>
</author>
<author><name sortKey="Aldissi, M" uniqKey="Aldissi M">M. Aldissi</name>
<affiliation wicri:level="3"><inist:fA14 i1="01"><s1>XLIM Institute, UMR 6172, Université de Limoges/CNRS, 123 Avenue Albert Thomas</s1>
<s2>87060 Limoges</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>6 aut.</sZ>
</inist:fA14>
<country>France</country>
<placeName><region type="region" nuts="2">Limousin</region>
<settlement type="city">Limoges</settlement>
</placeName>
</affiliation>
</author>
</titleStmt>
<publicationStmt><idno type="inist">10-0167126</idno>
<date when="2010">2010</date>
<idno type="stanalyst">PASCAL 10-0167126 INIST</idno>
<idno type="RBID">Pascal:10-0167126</idno>
<idno type="wicri:Area/Main/Corpus">004735</idno>
<idno type="wicri:Area/Main/Repository">004029</idno>
</publicationStmt>
<seriesStmt><idno type="ISSN">0040-6090</idno>
<title level="j" type="abbreviated">Thin solid films</title>
<title level="j" type="main">Thin solid films</title>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Absorption spectrum</term>
<term>Electrical conductivity</term>
<term>Electrical properties</term>
<term>Fullerenes</term>
<term>Heat treatment</term>
<term>Illumination</term>
<term>Indium oxide</term>
<term>Ion beam sputtering</term>
<term>Layer thickness</term>
<term>Optical properties</term>
<term>Optical transmission</term>
<term>Optoelectronic device</term>
<term>Photovoltaic cell</term>
<term>Sheet resistivity</term>
<term>Silver</term>
<term>Solar cell</term>
<term>Tin oxide</term>
</keywords>
<keywords scheme="Pascal" xml:lang="fr"><term>Dispositif photovoltaïque</term>
<term>Traitement thermique</term>
<term>Conductivité électrique</term>
<term>Dispositif optoélectronique</term>
<term>Propriété électrique</term>
<term>Propriété optique</term>
<term>Résistivité couche</term>
<term>Transmission optique</term>
<term>Spectre absorption</term>
<term>Epaisseur couche</term>
<term>Fullerènes</term>
<term>Cellule solaire</term>
<term>Eclairement</term>
<term>Pulvérisation faisceau ionique</term>
<term>Oxyde d'indium</term>
<term>Oxyde d'étain</term>
<term>Argent</term>
<term>Substrat polymère</term>
<term>C60</term>
<term>8460J</term>
<term>7361</term>
<term>8560</term>
<term>7350</term>
</keywords>
<keywords scheme="Wicri" type="concept" xml:lang="fr"><term>Argent</term>
</keywords>
</textClass>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en">The use of indium tin oxide (ITO) in conjunction with polymeric substrates requires deposition at low temperatures or room temperature, and with a limited or no thermal treatment. This process results in high resistivity materials. To achieve practical resistivity levels, we replaced ITO, the workhorse in organic optoelectronic devices, with an ITO/Ag/ITO tri-layer anode. This material yielded the desired electrical properties without a significant effect on its optical properties. For example, a sheet resistance of 15 Ω/Δ and an optical transmission of 90% at 550 nm were obtained for a tri-layer film in which thickness of each ITO layer is 50 nm and the Ag layer thickness is 8 nm. The use of these tri-layer anodes in CuPc-C<sub>60</sub>
-based organic solar cells led to an increase in the fill factor under illumination, and thus an improvement of the external power conversion efficiency.</div>
</front>
</TEI>
<inist><standard h6="B"><pA><fA01 i1="01" i2="1"><s0>0040-6090</s0>
</fA01>
<fA02 i1="01"><s0>THSFAP</s0>
</fA02>
<fA03 i2="1"><s0>Thin solid films</s0>
</fA03>
<fA05><s2>518</s2>
</fA05>
<fA06><s2>4</s2>
</fA06>
<fA08 i1="01" i2="1" l="ENG"><s1>High quality transparent conductive electrodes in organic photovoltaic devices</s1>
</fA08>
<fA09 i1="01" i2="1" l="ENG"><s1>Transparent Conductive Oxides: TCO2008</s1>
</fA09>
<fA11 i1="01" i2="1"><s1>CHAKAROUN (M.)</s1>
</fA11>
<fA11 i1="02" i2="1"><s1>LUCAS (B.)</s1>
</fA11>
<fA11 i1="03" i2="1"><s1>RATIER (B.)</s1>
</fA11>
<fA11 i1="04" i2="1"><s1>DEFRANOUX (C.)</s1>
</fA11>
<fA11 i1="05" i2="1"><s1>PIEL (J. P.)</s1>
</fA11>
<fA11 i1="06" i2="1"><s1>ALDISSI (M.)</s1>
</fA11>
<fA12 i1="01" i2="1"><s1>FORTUNATO (Elvira)</s1>
<s9>ed.</s9>
</fA12>
<fA12 i1="02" i2="1"><s1>LEE (Sang Yeol)</s1>
<s9>ed.</s9>
</fA12>
<fA12 i1="03" i2="1"><s1>VAYSSIERES (Lionel)</s1>
<s9>ed.</s9>
</fA12>
<fA14 i1="01"><s1>XLIM Institute, UMR 6172, Université de Limoges/CNRS, 123 Avenue Albert Thomas</s1>
<s2>87060 Limoges</s2>
<s3>FRA</s3>
<sZ>1 aut.</sZ>
<sZ>2 aut.</sZ>
<sZ>3 aut.</sZ>
<sZ>6 aut.</sZ>
</fA14>
<fA14 i1="02"><s1>SOPRA-SA, 26 rue Pierre Joigneaux</s1>
<s2>92270 Bois-Colombes</s2>
<s3>FRA</s3>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
</fA14>
<fA15 i1="01"><s1>Materials Science Department/CENIMAT, Faculty of Sciences and Technology, New university of Lisbon, Campus da Caparica</s1>
<s2>2829-516 Caparica</s2>
<s3>PRT</s3>
<sZ>1 aut.</sZ>
</fA15>
<fA15 i1="02"><s1>Center for Energy Materials Research, Korea Institute of Science and Technology</s1>
<s2>Seoul 136-791</s2>
<s3>KOR</s3>
<sZ>2 aut.</sZ>
</fA15>
<fA20><s1>1250-1253</s1>
</fA20>
<fA21><s1>2010</s1>
</fA21>
<fA23 i1="01"><s0>ENG</s0>
</fA23>
<fA43 i1="01"><s1>INIST</s1>
<s2>13597</s2>
<s5>354000189339040510</s5>
</fA43>
<fA44><s0>0000</s0>
<s1>© 2010 INIST-CNRS. All rights reserved.</s1>
</fA44>
<fA45><s0>21 ref.</s0>
</fA45>
<fA47 i1="01" i2="1"><s0>10-0167126</s0>
</fA47>
<fA60><s1>P</s1>
<s2>C</s2>
</fA60>
<fA61><s0>A</s0>
</fA61>
<fA64 i1="01" i2="1"><s0>Thin solid films</s0>
</fA64>
<fA66 i1="01"><s0>NLD</s0>
</fA66>
<fC01 i1="01" l="ENG"><s0>The use of indium tin oxide (ITO) in conjunction with polymeric substrates requires deposition at low temperatures or room temperature, and with a limited or no thermal treatment. This process results in high resistivity materials. To achieve practical resistivity levels, we replaced ITO, the workhorse in organic optoelectronic devices, with an ITO/Ag/ITO tri-layer anode. This material yielded the desired electrical properties without a significant effect on its optical properties. For example, a sheet resistance of 15 Ω/Δ and an optical transmission of 90% at 550 nm were obtained for a tri-layer film in which thickness of each ITO layer is 50 nm and the Ag layer thickness is 8 nm. The use of these tri-layer anodes in CuPc-C<sub>60</sub>
-based organic solar cells led to an increase in the fill factor under illumination, and thus an improvement of the external power conversion efficiency.</s0>
</fC01>
<fC02 i1="01" i2="X"><s0>001D06C02D1</s0>
</fC02>
<fC02 i1="02" i2="3"><s0>001B70C61</s0>
</fC02>
<fC02 i1="03" i2="X"><s0>001D03F15</s0>
</fC02>
<fC02 i1="04" i2="3"><s0>001B70C50</s0>
</fC02>
<fC02 i1="05" i2="X"><s0>230</s0>
</fC02>
<fC03 i1="01" i2="X" l="FRE"><s0>Dispositif photovoltaïque</s0>
<s5>01</s5>
</fC03>
<fC03 i1="01" i2="X" l="ENG"><s0>Photovoltaic cell</s0>
<s5>01</s5>
</fC03>
<fC03 i1="01" i2="X" l="SPA"><s0>Dispositivo fotovoltaico</s0>
<s5>01</s5>
</fC03>
<fC03 i1="02" i2="X" l="FRE"><s0>Traitement thermique</s0>
<s5>02</s5>
</fC03>
<fC03 i1="02" i2="X" l="ENG"><s0>Heat treatment</s0>
<s5>02</s5>
</fC03>
<fC03 i1="02" i2="X" l="SPA"><s0>Tratamiento térmico</s0>
<s5>02</s5>
</fC03>
<fC03 i1="03" i2="X" l="FRE"><s0>Conductivité électrique</s0>
<s5>03</s5>
</fC03>
<fC03 i1="03" i2="X" l="ENG"><s0>Electrical conductivity</s0>
<s5>03</s5>
</fC03>
<fC03 i1="03" i2="X" l="SPA"><s0>Conductividad eléctrica</s0>
<s5>03</s5>
</fC03>
<fC03 i1="04" i2="X" l="FRE"><s0>Dispositif optoélectronique</s0>
<s5>04</s5>
</fC03>
<fC03 i1="04" i2="X" l="ENG"><s0>Optoelectronic device</s0>
<s5>04</s5>
</fC03>
<fC03 i1="04" i2="X" l="SPA"><s0>Dispositivo optoelectrónico</s0>
<s5>04</s5>
</fC03>
<fC03 i1="05" i2="X" l="FRE"><s0>Propriété électrique</s0>
<s5>05</s5>
</fC03>
<fC03 i1="05" i2="X" l="ENG"><s0>Electrical properties</s0>
<s5>05</s5>
</fC03>
<fC03 i1="05" i2="X" l="SPA"><s0>Propiedad eléctrica</s0>
<s5>05</s5>
</fC03>
<fC03 i1="06" i2="X" l="FRE"><s0>Propriété optique</s0>
<s5>06</s5>
</fC03>
<fC03 i1="06" i2="X" l="ENG"><s0>Optical properties</s0>
<s5>06</s5>
</fC03>
<fC03 i1="06" i2="X" l="SPA"><s0>Propiedad óptica</s0>
<s5>06</s5>
</fC03>
<fC03 i1="07" i2="X" l="FRE"><s0>Résistivité couche</s0>
<s5>07</s5>
</fC03>
<fC03 i1="07" i2="X" l="ENG"><s0>Sheet resistivity</s0>
<s5>07</s5>
</fC03>
<fC03 i1="07" i2="X" l="SPA"><s0>Resistividad capa</s0>
<s5>07</s5>
</fC03>
<fC03 i1="08" i2="X" l="FRE"><s0>Transmission optique</s0>
<s5>08</s5>
</fC03>
<fC03 i1="08" i2="X" l="ENG"><s0>Optical transmission</s0>
<s5>08</s5>
</fC03>
<fC03 i1="08" i2="X" l="SPA"><s0>Transmisión óptica</s0>
<s5>08</s5>
</fC03>
<fC03 i1="09" i2="X" l="FRE"><s0>Spectre absorption</s0>
<s5>09</s5>
</fC03>
<fC03 i1="09" i2="X" l="ENG"><s0>Absorption spectrum</s0>
<s5>09</s5>
</fC03>
<fC03 i1="09" i2="X" l="SPA"><s0>Espectro de absorción</s0>
<s5>09</s5>
</fC03>
<fC03 i1="10" i2="X" l="FRE"><s0>Epaisseur couche</s0>
<s5>10</s5>
</fC03>
<fC03 i1="10" i2="X" l="ENG"><s0>Layer thickness</s0>
<s5>10</s5>
</fC03>
<fC03 i1="10" i2="X" l="SPA"><s0>Espesor capa</s0>
<s5>10</s5>
</fC03>
<fC03 i1="11" i2="X" l="FRE"><s0>Fullerènes</s0>
<s5>11</s5>
</fC03>
<fC03 i1="11" i2="X" l="ENG"><s0>Fullerenes</s0>
<s5>11</s5>
</fC03>
<fC03 i1="12" i2="X" l="FRE"><s0>Cellule solaire</s0>
<s5>12</s5>
</fC03>
<fC03 i1="12" i2="X" l="ENG"><s0>Solar cell</s0>
<s5>12</s5>
</fC03>
<fC03 i1="12" i2="X" l="SPA"><s0>Célula solar</s0>
<s5>12</s5>
</fC03>
<fC03 i1="13" i2="X" l="FRE"><s0>Eclairement</s0>
<s5>13</s5>
</fC03>
<fC03 i1="13" i2="X" l="ENG"><s0>Illumination</s0>
<s5>13</s5>
</fC03>
<fC03 i1="13" i2="X" l="SPA"><s0>Alumbrado</s0>
<s5>13</s5>
</fC03>
<fC03 i1="14" i2="X" l="FRE"><s0>Pulvérisation faisceau ionique</s0>
<s5>14</s5>
</fC03>
<fC03 i1="14" i2="X" l="ENG"><s0>Ion beam sputtering</s0>
<s5>14</s5>
</fC03>
<fC03 i1="14" i2="X" l="SPA"><s0>Pulverización haz iónico</s0>
<s5>14</s5>
</fC03>
<fC03 i1="15" i2="X" l="FRE"><s0>Oxyde d'indium</s0>
<s5>15</s5>
</fC03>
<fC03 i1="15" i2="X" l="ENG"><s0>Indium oxide</s0>
<s5>15</s5>
</fC03>
<fC03 i1="15" i2="X" l="SPA"><s0>Indio óxido</s0>
<s5>15</s5>
</fC03>
<fC03 i1="16" i2="X" l="FRE"><s0>Oxyde d'étain</s0>
<s5>16</s5>
</fC03>
<fC03 i1="16" i2="X" l="ENG"><s0>Tin oxide</s0>
<s5>16</s5>
</fC03>
<fC03 i1="16" i2="X" l="SPA"><s0>Estaño óxido</s0>
<s5>16</s5>
</fC03>
<fC03 i1="17" i2="X" l="FRE"><s0>Argent</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>17</s5>
</fC03>
<fC03 i1="17" i2="X" l="ENG"><s0>Silver</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>17</s5>
</fC03>
<fC03 i1="17" i2="X" l="SPA"><s0>Plata</s0>
<s2>NC</s2>
<s2>FX</s2>
<s5>17</s5>
</fC03>
<fC03 i1="18" i2="X" l="FRE"><s0>Substrat polymère</s0>
<s4>INC</s4>
<s5>46</s5>
</fC03>
<fC03 i1="19" i2="X" l="FRE"><s0>C60</s0>
<s4>INC</s4>
<s5>47</s5>
</fC03>
<fC03 i1="20" i2="X" l="FRE"><s0>8460J</s0>
<s4>INC</s4>
<s5>71</s5>
</fC03>
<fC03 i1="21" i2="X" l="FRE"><s0>7361</s0>
<s4>INC</s4>
<s5>72</s5>
</fC03>
<fC03 i1="22" i2="X" l="FRE"><s0>8560</s0>
<s4>INC</s4>
<s5>73</s5>
</fC03>
<fC03 i1="23" i2="X" l="FRE"><s0>7350</s0>
<s4>INC</s4>
<s5>74</s5>
</fC03>
<fN21><s1>109</s1>
</fN21>
<fN44 i1="01"><s1>OTO</s1>
</fN44>
<fN82><s1>OTO</s1>
</fN82>
</pA>
<pR><fA30 i1="01" i2="1" l="ENG"><s1>International Symposium on Transparent Conductive Oxides (TCO2008)</s1>
<s2>2</s2>
<s3>Hersonissos, Crète GRC</s3>
<s4>2008-10-22</s4>
</fA30>
</pR>
</standard>
</inist>
</record>

Pour manipuler ce document sous Unix (Dilib)

EXPLOR_STEP=IndiumV3/Data/Main/Repository

HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 004029 | SxmlIndent | more

HfdSelect -h $EXPLOR_AREA/Data/Main/Repository/biblio.hfd -nk 004029 | SxmlIndent | more

Pour mettre un lien sur cette page dans le réseau Wicri

{{Explor lien
   |wiki=   *** parameter Area/wikiCode missing *** 
   |area=    IndiumV3
   |flux=    Main
   |étape=   Repository
   |type=    RBID
   |clé=     Pascal:10-0167126
   |texte=   High quality transparent conductive electrodes in organic photovoltaic devices
}}

This area was generated with Dilib version V0.5.77.
Data generation: Mon Jun 9 10:27:54 2014. Site generation: Thu Mar 7 16:19:59 2024

	Serveur d'exploration sur l'Indium
	Attention, ce site est en cours de développement ! Attention, site généré par des moyens informatiques à partir de corpus bruts. Les informations ne sont donc pas validées.

Serveur d'exploration sur l'Indium

High quality transparent conductive electrodes in organic photovoltaic devices

High quality transparent conductive electrodes in organic photovoltaic devices

Descripteurs français

English descriptors

Abstract

Links toward previous steps (curation, corpus...)

Links to Exploration step

Le document en format XML

Pour manipuler ce document sous Unix (Dilib)

Pour mettre un lien sur cette page dans le réseau Wicri