IndiumV3, Chine, Analysis, bibRecord, 000760

Optimization of inverted tandem organic solar cells

Identifieur interne : 000760 ( Chine/Analysis ); précédent : 000759; suivant : 000761

Optimization of inverted tandem organic solar cells

Auteurs : RBID : Pascal:11-0160896

Descripteurs français

Pascal (Inist)
- Optimisation, Cellule solaire tandem, Cellule solaire organique, Hétérojonction, Couche active, Couche ITO, Addition étain, Cathode, Anode, Epaisseur, Couche tampon, Exciton, Trempe, Variance, Distribution champ, Absorption lumière, Conversion énergie, Taux conversion, Courant court circuit, Tension circuit ouvert, Facteur remplissage, Thiophène dérivé polymère, Acide butyrique, Ester, Composé du fullerène, Oxyde de molybdène, Oxyde d'indium, MoO3, ITO, Photovoltaïque organique.

English descriptors

KwdEn :
- Active layer, Anode, Buffer layer, Butyric acid, Cathode, Conversion rate, Energy conversion, Ester, Exciton, Field distribution, Fill factor, Fullerene compounds, Heterojunction, ITO layers, Indium oxide, Light absorption, Molybdenum oxide, Open circuit voltage, Optimization, Organic photovoltaics, Organic solar cells, Quenching, Short circuit currents, Tandem solar cell, Thickness, Thiophene derivative polymer, Tin addition, Variance.

Abstract

Inverted tandem organic solar cells, consisting of two bulk heterojunction sub-cells with identical poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C₆₁ (PCBM) active layer and a MoO₃/Ag/Al/Ca intermediate layer, have been presented and optimized. Indium tin oxide (ITO) modified by Ca acts as a cathode for electron collection and Ag is used as the anode for hole collection for the tandem device. A proper thickness of Ca (3 nm) forms a continuous layer, working as a cathode for the top sub-cell. MoO₃ as the anode buffer layer prevents exciton quenching and charge loss at the anode side, which could result in increase in interfacial resistance. The variance of sub-cell thickness adjusts the optical field distribution in the entire device, facilitating light absorption and good current matching in both sub-cells. The optimal inverted tandem device achieves a maximum power conversion efficiency of 2.89% with a short-circuit current density of 4.19 mA/cm², an open-circuit voltage of 1.17 V, and a fill factor of 59.0% under simulated 100 mW/cm² (AM 1.5G) solar irradiation. .

Links toward previous steps (curation, corpus...)

to stream Main, to step Corpus: 003415
to stream Main, to step Repository: 002839
to stream Chine, to step Extraction: 000760

Links to Exploration step

Pascal:11-0160896

Le document en format XML

<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en" level="a">Optimization of inverted tandem organic solar cells</title>
<author><name sortKey="Zhao, D W" uniqKey="Zhao D">D. W. Zhao</name>
<affiliation wicri:level="1"><inist:fA14 i1="01"><s1>School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue</s1>
<s2>Singapore 639798</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
<sZ>7 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 639798</wicri:noRegion>
</affiliation>
<affiliation wicri:level="1"><inist:fA14 i1="02"><s1>Institute of Microelectronics, A*STAR (Agency for Science, Technology and Research), 11 Science Park Road, Science Park 11</s1>
<s2>Singapore 117685</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>9 aut.</sZ>
<sZ>10 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 117685</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Ke, L" uniqKey="Ke L">L. Ke</name>
<affiliation wicri:level="1"><inist:fA14 i1="03"><s1>Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 3 Research Link</s1>
<s2>Singapore 117602</s2>
<s3>SGP</s3>
<sZ>2 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 117602</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Li, Y" uniqKey="Li Y">Y. Li</name>
<affiliation wicri:level="1"><inist:fA14 i1="04"><s1>Center for Nanotechnology and Molecular Materials, Department of Physics, Wake Forest University</s1>
<s2>Winston-Salem, NC 27109</s2>
<s3>USA</s3>
<sZ>3 aut.</sZ>
<sZ>8 aut.</sZ>
</inist:fA14>
<country>États-Unis</country>
<wicri:noRegion>Winston-Salem, NC 27109</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Tan, S T" uniqKey="Tan S">S. T. Tan</name>
<affiliation wicri:level="1"><inist:fA14 i1="01"><s1>School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue</s1>
<s2>Singapore 639798</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
<sZ>7 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 639798</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Kyaw, A K K" uniqKey="Kyaw A">A. K. K. Kyaw</name>
<affiliation wicri:level="1"><inist:fA14 i1="01"><s1>School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue</s1>
<s2>Singapore 639798</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
<sZ>7 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 639798</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Demir, H V" uniqKey="Demir H">H. V. Demir</name>
<affiliation wicri:level="1"><inist:fA14 i1="01"><s1>School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue</s1>
<s2>Singapore 639798</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
<sZ>7 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 639798</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Sun, X W" uniqKey="Sun X">X. W. Sun</name>
<affiliation wicri:level="1"><inist:fA14 i1="01"><s1>School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue</s1>
<s2>Singapore 639798</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
<sZ>7 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 639798</wicri:noRegion>
</affiliation>
<affiliation wicri:level="1"><inist:fA14 i1="05"><s1>Department of Applied Physics, College of Science, Tianjin University</s1>
<s2>Tianjin 300072</s2>
<s3>CHN</s3>
<sZ>7 aut.</sZ>
</inist:fA14>
<country>République populaire de Chine</country>
<wicri:noRegion>Tianjin 300072</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Carroll, D L" uniqKey="Carroll D">D. L. Carroll</name>
<affiliation wicri:level="1"><inist:fA14 i1="04"><s1>Center for Nanotechnology and Molecular Materials, Department of Physics, Wake Forest University</s1>
<s2>Winston-Salem, NC 27109</s2>
<s3>USA</s3>
<sZ>3 aut.</sZ>
<sZ>8 aut.</sZ>
</inist:fA14>
<country>États-Unis</country>
<wicri:noRegion>Winston-Salem, NC 27109</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Lo, G Q" uniqKey="Lo G">G. Q Lo</name>
<affiliation wicri:level="1"><inist:fA14 i1="02"><s1>Institute of Microelectronics, A*STAR (Agency for Science, Technology and Research), 11 Science Park Road, Science Park 11</s1>
<s2>Singapore 117685</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>9 aut.</sZ>
<sZ>10 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 117685</wicri:noRegion>
</affiliation>
</author>
<author><name sortKey="Kwong, D L" uniqKey="Kwong D">D. L. Kwong</name>
<affiliation wicri:level="1"><inist:fA14 i1="02"><s1>Institute of Microelectronics, A*STAR (Agency for Science, Technology and Research), 11 Science Park Road, Science Park 11</s1>
<s2>Singapore 117685</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>9 aut.</sZ>
<sZ>10 aut.</sZ>
</inist:fA14>
<country>Singapour</country>
<wicri:noRegion>Singapore 117685</wicri:noRegion>
</affiliation>
</author>
</titleStmt>
<publicationStmt><idno type="inist">11-0160896</idno>
<date when="2011">2011</date>
<idno type="stanalyst">PASCAL 11-0160896 INIST</idno>
<idno type="RBID">Pascal:11-0160896</idno>
<idno type="wicri:Area/Main/Corpus">003415</idno>
<idno type="wicri:Area/Main/Repository">002839</idno>
<idno type="wicri:Area/Chine/Extraction">000760</idno>
</publicationStmt>
<seriesStmt><idno type="ISSN">0927-0248</idno>
<title level="j" type="abbreviated">Sol. energy mater. sol. cells</title>
<title level="j" type="main">Solar energy materials and solar cells</title>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Active layer</term>
<term>Anode</term>
<term>Buffer layer</term>
<term>Butyric acid</term>
<term>Cathode</term>
<term>Conversion rate</term>
<term>Energy conversion</term>
<term>Ester</term>
<term>Exciton</term>
<term>Field distribution</term>
<term>Fill factor</term>
<term>Fullerene compounds</term>
<term>Heterojunction</term>
<term>ITO layers</term>
<term>Indium oxide</term>
<term>Light absorption</term>
<term>Molybdenum oxide</term>
<term>Open circuit voltage</term>
<term>Optimization</term>
<term>Organic photovoltaics</term>
<term>Organic solar cells</term>
<term>Quenching</term>
<term>Short circuit currents</term>
<term>Tandem solar cell</term>
<term>Thickness</term>
<term>Thiophene derivative polymer</term>
<term>Tin addition</term>
<term>Variance</term>
</keywords>
<keywords scheme="Pascal" xml:lang="fr"><term>Optimisation</term>
<term>Cellule solaire tandem</term>
<term>Cellule solaire organique</term>
<term>Hétérojonction</term>
<term>Couche active</term>
<term>Couche ITO</term>
<term>Addition étain</term>
<term>Cathode</term>
<term>Anode</term>
<term>Epaisseur</term>
<term>Couche tampon</term>
<term>Exciton</term>
<term>Trempe</term>
<term>Variance</term>
<term>Distribution champ</term>
<term>Absorption lumière</term>
<term>Conversion énergie</term>
<term>Taux conversion</term>
<term>Courant court circuit</term>
<term>Tension circuit ouvert</term>
<term>Facteur remplissage</term>
<term>Thiophène dérivé polymère</term>
<term>Acide butyrique</term>
<term>Ester</term>
<term>Composé du fullerène</term>
<term>Oxyde de molybdène</term>
<term>Oxyde d'indium</term>
<term>MoO3</term>
<term>ITO</term>
<term>Photovoltaïque organique</term>
</keywords>
</textClass>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en">Inverted tandem organic solar cells, consisting of two bulk heterojunction sub-cells with identical poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C<sub>61</sub>
 (PCBM) active layer and a MoO<sub>3</sub>
/Ag/Al/Ca intermediate layer, have been presented and optimized. Indium tin oxide (ITO) modified by Ca acts as a cathode for electron collection and Ag is used as the anode for hole collection for the tandem device. A proper thickness of Ca (3 nm) forms a continuous layer, working as a cathode for the top sub-cell. MoO<sub>3</sub>
 as the anode buffer layer prevents exciton quenching and charge loss at the anode side, which could result in increase in interfacial resistance. The variance of sub-cell thickness adjusts the optical field distribution in the entire device, facilitating light absorption and good current matching in both sub-cells. The optimal inverted tandem device achieves a maximum power conversion efficiency of 2.89% with a short-circuit current density of 4.19 mA/cm<sup>2</sup>
, an open-circuit voltage of 1.17 V, and a fill factor of 59.0% under simulated 100 mW/cm<sup>2</sup>
 (AM 1.5G) solar irradiation. .</div>
</front>
</TEI>
<inist><standard h6="B"><pA><fA01 i1="01" i2="1"><s0>0927-0248</s0>
</fA01>
<fA03 i2="1"><s0>Sol. energy mater. sol. cells</s0>
</fA03>
<fA05><s2>95</s2>
</fA05>
<fA06><s2>3</s2>
</fA06>
<fA08 i1="01" i2="1" l="ENG"><s1>Optimization of inverted tandem organic solar cells</s1>
</fA08>
<fA11 i1="01" i2="1"><s1>ZHAO (D. W.)</s1>
</fA11>
<fA11 i1="02" i2="1"><s1>KE (L.)</s1>
</fA11>
<fA11 i1="03" i2="1"><s1>LI (Y.)</s1>
</fA11>
<fA11 i1="04" i2="1"><s1>TAN (S. T.)</s1>
</fA11>
<fA11 i1="05" i2="1"><s1>KYAW (A. K. K.)</s1>
</fA11>
<fA11 i1="06" i2="1"><s1>DEMIR (H. V.)</s1>
</fA11>
<fA11 i1="07" i2="1"><s1>SUN (X. W.)</s1>
</fA11>
<fA11 i1="08" i2="1"><s1>CARROLL (D. L.)</s1>
</fA11>
<fA11 i1="09" i2="1"><s1>LO (G. Q)</s1>
</fA11>
<fA11 i1="10" i2="1"><s1>KWONG (D. L.)</s1>
</fA11>
<fA14 i1="01"><s1>School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue</s1>
<s2>Singapore 639798</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>4 aut.</sZ>
<sZ>5 aut.</sZ>
<sZ>6 aut.</sZ>
<sZ>7 aut.</sZ>
</fA14>
<fA14 i1="02"><s1>Institute of Microelectronics, A*STAR (Agency for Science, Technology and Research), 11 Science Park Road, Science Park 11</s1>
<s2>Singapore 117685</s2>
<s3>SGP</s3>
<sZ>1 aut.</sZ>
<sZ>9 aut.</sZ>
<sZ>10 aut.</sZ>
</fA14>
<fA14 i1="03"><s1>Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 3 Research Link</s1>
<s2>Singapore 117602</s2>
<s3>SGP</s3>
<sZ>2 aut.</sZ>
</fA14>
<fA14 i1="04"><s1>Center for Nanotechnology and Molecular Materials, Department of Physics, Wake Forest University</s1>
<s2>Winston-Salem, NC 27109</s2>
<s3>USA</s3>
<sZ>3 aut.</sZ>
<sZ>8 aut.</sZ>
</fA14>
<fA14 i1="05"><s1>Department of Applied Physics, College of Science, Tianjin University</s1>
<s2>Tianjin 300072</s2>
<s3>CHN</s3>
<sZ>7 aut.</sZ>
</fA14>
<fA20><s1>921-926</s1>
</fA20>
<fA21><s1>2011</s1>
</fA21>
<fA23 i1="01"><s0>ENG</s0>
</fA23>
<fA43 i1="01"><s1>INIST</s1>
<s2>18016</s2>
<s5>354000191978550190</s5>
</fA43>
<fA44><s0>0000</s0>
<s1>© 2011 INIST-CNRS. All rights reserved.</s1>
</fA44>
<fA45><s0>56 ref.</s0>
</fA45>
<fA47 i1="01" i2="1"><s0>11-0160896</s0>
</fA47>
<fA60><s1>P</s1>
</fA60>
<fA61><s0>A</s0>
</fA61>
<fA64 i1="01" i2="1"><s0>Solar energy materials and solar cells</s0>
</fA64>
<fA66 i1="01"><s0>NLD</s0>
</fA66>
<fC01 i1="01" l="ENG"><s0>Inverted tandem organic solar cells, consisting of two bulk heterojunction sub-cells with identical poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C<sub>61</sub>
 (PCBM) active layer and a MoO<sub>3</sub>
/Ag/Al/Ca intermediate layer, have been presented and optimized. Indium tin oxide (ITO) modified by Ca acts as a cathode for electron collection and Ag is used as the anode for hole collection for the tandem device. A proper thickness of Ca (3 nm) forms a continuous layer, working as a cathode for the top sub-cell. MoO<sub>3</sub>
 as the anode buffer layer prevents exciton quenching and charge loss at the anode side, which could result in increase in interfacial resistance. The variance of sub-cell thickness adjusts the optical field distribution in the entire device, facilitating light absorption and good current matching in both sub-cells. The optimal inverted tandem device achieves a maximum power conversion efficiency of 2.89% with a short-circuit current density of 4.19 mA/cm<sup>2</sup>
, an open-circuit voltage of 1.17 V, and a fill factor of 59.0% under simulated 100 mW/cm<sup>2</sup>
 (AM 1.5G) solar irradiation. .</s0>
</fC01>
<fC02 i1="01" i2="X"><s0>001D06C02D1</s0>
</fC02>
<fC02 i1="02" i2="X"><s0>001D06C02B</s0>
</fC02>
<fC02 i1="03" i2="X"><s0>230</s0>
</fC02>
<fC03 i1="01" i2="X" l="FRE"><s0>Optimisation</s0>
<s5>01</s5>
</fC03>
<fC03 i1="01" i2="X" l="ENG"><s0>Optimization</s0>
<s5>01</s5>
</fC03>
<fC03 i1="01" i2="X" l="SPA"><s0>Optimización</s0>
<s5>01</s5>
</fC03>
<fC03 i1="02" i2="X" l="FRE"><s0>Cellule solaire tandem</s0>
<s5>02</s5>
</fC03>
<fC03 i1="02" i2="X" l="ENG"><s0>Tandem solar cell</s0>
<s5>02</s5>
</fC03>
<fC03 i1="02" i2="X" l="SPA"><s0>Célula solar tándem</s0>
<s5>02</s5>
</fC03>
<fC03 i1="03" i2="3" l="FRE"><s0>Cellule solaire organique</s0>
<s5>03</s5>
</fC03>
<fC03 i1="03" i2="3" l="ENG"><s0>Organic solar cells</s0>
<s5>03</s5>
</fC03>
<fC03 i1="04" i2="X" l="FRE"><s0>Hétérojonction</s0>
<s5>04</s5>
</fC03>
<fC03 i1="04" i2="X" l="ENG"><s0>Heterojunction</s0>
<s5>04</s5>
</fC03>
<fC03 i1="04" i2="X" l="SPA"><s0>Heterounión</s0>
<s5>04</s5>
</fC03>
<fC03 i1="05" i2="X" l="FRE"><s0>Couche active</s0>
<s5>05</s5>
</fC03>
<fC03 i1="05" i2="X" l="ENG"><s0>Active layer</s0>
<s5>05</s5>
</fC03>
<fC03 i1="05" i2="X" l="SPA"><s0>Capa activa</s0>
<s5>05</s5>
</fC03>
<fC03 i1="06" i2="3" l="FRE"><s0>Couche ITO</s0>
<s5>06</s5>
</fC03>
<fC03 i1="06" i2="3" l="ENG"><s0>ITO layers</s0>
<s5>06</s5>
</fC03>
<fC03 i1="07" i2="X" l="FRE"><s0>Addition étain</s0>
<s5>07</s5>
</fC03>
<fC03 i1="07" i2="X" l="ENG"><s0>Tin addition</s0>
<s5>07</s5>
</fC03>
<fC03 i1="07" i2="X" l="SPA"><s0>Adición estaño</s0>
<s5>07</s5>
</fC03>
<fC03 i1="08" i2="X" l="FRE"><s0>Cathode</s0>
<s5>08</s5>
</fC03>
<fC03 i1="08" i2="X" l="ENG"><s0>Cathode</s0>
<s5>08</s5>
</fC03>
<fC03 i1="08" i2="X" l="SPA"><s0>Cátodo</s0>
<s5>08</s5>
</fC03>
<fC03 i1="09" i2="X" l="FRE"><s0>Anode</s0>
<s5>09</s5>
</fC03>
<fC03 i1="09" i2="X" l="ENG"><s0>Anode</s0>
<s5>09</s5>
</fC03>
<fC03 i1="09" i2="X" l="SPA"><s0>Anodo</s0>
<s5>09</s5>
</fC03>
<fC03 i1="10" i2="X" l="FRE"><s0>Epaisseur</s0>
<s5>10</s5>
</fC03>
<fC03 i1="10" i2="X" l="ENG"><s0>Thickness</s0>
<s5>10</s5>
</fC03>
<fC03 i1="10" i2="X" l="SPA"><s0>Espesor</s0>
<s5>10</s5>
</fC03>
<fC03 i1="11" i2="X" l="FRE"><s0>Couche tampon</s0>
<s5>11</s5>
</fC03>
<fC03 i1="11" i2="X" l="ENG"><s0>Buffer layer</s0>
<s5>11</s5>
</fC03>
<fC03 i1="11" i2="X" l="SPA"><s0>Capa tampón</s0>
<s5>11</s5>
</fC03>
<fC03 i1="12" i2="X" l="FRE"><s0>Exciton</s0>
<s5>12</s5>
</fC03>
<fC03 i1="12" i2="X" l="ENG"><s0>Exciton</s0>
<s5>12</s5>
</fC03>
<fC03 i1="12" i2="X" l="SPA"><s0>Excitón</s0>
<s5>12</s5>
</fC03>
<fC03 i1="13" i2="X" l="FRE"><s0>Trempe</s0>
<s5>13</s5>
</fC03>
<fC03 i1="13" i2="X" l="ENG"><s0>Quenching</s0>
<s5>13</s5>
</fC03>
<fC03 i1="13" i2="X" l="SPA"><s0>Temple</s0>
<s5>13</s5>
</fC03>
<fC03 i1="14" i2="X" l="FRE"><s0>Variance</s0>
<s5>14</s5>
</fC03>
<fC03 i1="14" i2="X" l="ENG"><s0>Variance</s0>
<s5>14</s5>
</fC03>
<fC03 i1="14" i2="X" l="SPA"><s0>Variancia</s0>
<s5>14</s5>
</fC03>
<fC03 i1="15" i2="X" l="FRE"><s0>Distribution champ</s0>
<s5>15</s5>
</fC03>
<fC03 i1="15" i2="X" l="ENG"><s0>Field distribution</s0>
<s5>15</s5>
</fC03>
<fC03 i1="15" i2="X" l="SPA"><s0>Distribución campo</s0>
<s5>15</s5>
</fC03>
<fC03 i1="16" i2="X" l="FRE"><s0>Absorption lumière</s0>
<s5>16</s5>
</fC03>
<fC03 i1="16" i2="X" l="ENG"><s0>Light absorption</s0>
<s5>16</s5>
</fC03>
<fC03 i1="16" i2="X" l="SPA"><s0>Absorción luz</s0>
<s5>16</s5>
</fC03>
<fC03 i1="17" i2="X" l="FRE"><s0>Conversion énergie</s0>
<s5>17</s5>
</fC03>
<fC03 i1="17" i2="X" l="ENG"><s0>Energy conversion</s0>
<s5>17</s5>
</fC03>
<fC03 i1="17" i2="X" l="SPA"><s0>Conversión energética</s0>
<s5>17</s5>
</fC03>
<fC03 i1="18" i2="X" l="FRE"><s0>Taux conversion</s0>
<s5>18</s5>
</fC03>
<fC03 i1="18" i2="X" l="ENG"><s0>Conversion rate</s0>
<s5>18</s5>
</fC03>
<fC03 i1="18" i2="X" l="SPA"><s0>Factor conversión</s0>
<s5>18</s5>
</fC03>
<fC03 i1="19" i2="3" l="FRE"><s0>Courant court circuit</s0>
<s5>19</s5>
</fC03>
<fC03 i1="19" i2="3" l="ENG"><s0>Short circuit currents</s0>
<s5>19</s5>
</fC03>
<fC03 i1="20" i2="3" l="FRE"><s0>Tension circuit ouvert</s0>
<s5>20</s5>
</fC03>
<fC03 i1="20" i2="3" l="ENG"><s0>Open circuit voltage</s0>
<s5>20</s5>
</fC03>
<fC03 i1="21" i2="3" l="FRE"><s0>Facteur remplissage</s0>
<s5>21</s5>
</fC03>
<fC03 i1="21" i2="3" l="ENG"><s0>Fill factor</s0>
<s5>21</s5>
</fC03>
<fC03 i1="22" i2="X" l="FRE"><s0>Thiophène dérivé polymère</s0>
<s2>NK</s2>
<s5>22</s5>
</fC03>
<fC03 i1="22" i2="X" l="ENG"><s0>Thiophene derivative polymer</s0>
<s2>NK</s2>
<s5>22</s5>
</fC03>
<fC03 i1="22" i2="X" l="SPA"><s0>Tiofeno derivado polímero</s0>
<s2>NK</s2>
<s5>22</s5>
</fC03>
<fC03 i1="23" i2="X" l="FRE"><s0>Acide butyrique</s0>
<s2>NK</s2>
<s5>23</s5>
</fC03>
<fC03 i1="23" i2="X" l="ENG"><s0>Butyric acid</s0>
<s2>NK</s2>
<s5>23</s5>
</fC03>
<fC03 i1="23" i2="X" l="SPA"><s0>Butírico ácido</s0>
<s2>NK</s2>
<s5>23</s5>
</fC03>
<fC03 i1="24" i2="X" l="FRE"><s0>Ester</s0>
<s5>24</s5>
</fC03>
<fC03 i1="24" i2="X" l="ENG"><s0>Ester</s0>
<s5>24</s5>
</fC03>
<fC03 i1="24" i2="X" l="SPA"><s0>Ester</s0>
<s5>24</s5>
</fC03>
<fC03 i1="25" i2="3" l="FRE"><s0>Composé du fullerène</s0>
<s5>25</s5>
</fC03>
<fC03 i1="25" i2="3" l="ENG"><s0>Fullerene compounds</s0>
<s5>25</s5>
</fC03>
<fC03 i1="26" i2="X" l="FRE"><s0>Oxyde de molybdène</s0>
<s5>26</s5>
</fC03>
<fC03 i1="26" i2="X" l="ENG"><s0>Molybdenum oxide</s0>
<s5>26</s5>
</fC03>
<fC03 i1="26" i2="X" l="SPA"><s0>Molibdeno óxido</s0>
<s5>26</s5>
</fC03>
<fC03 i1="27" i2="X" l="FRE"><s0>Oxyde d'indium</s0>
<s5>27</s5>
</fC03>
<fC03 i1="27" i2="X" l="ENG"><s0>Indium oxide</s0>
<s5>27</s5>
</fC03>
<fC03 i1="27" i2="X" l="SPA"><s0>Indio óxido</s0>
<s5>27</s5>
</fC03>
<fC03 i1="28" i2="X" l="FRE"><s0>MoO3</s0>
<s4>INC</s4>
<s5>82</s5>
</fC03>
<fC03 i1="29" i2="X" l="FRE"><s0>ITO</s0>
<s4>INC</s4>
<s5>83</s5>
</fC03>
<fC03 i1="30" i2="X" l="FRE"><s0>Photovoltaïque organique</s0>
<s4>CD</s4>
<s5>96</s5>
</fC03>
<fC03 i1="30" i2="X" l="ENG"><s0>Organic photovoltaics</s0>
<s4>CD</s4>
<s5>96</s5>
</fC03>
<fN21><s1>101</s1>
</fN21>
</pA>
</standard>
</inist>
</record>

Pour manipuler ce document sous Unix (Dilib)

EXPLOR_STEP=IndiumV3/Data/Chine/Analysis

HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 000760 | SxmlIndent | more

HfdSelect -h $EXPLOR_AREA/Data/Chine/Analysis/biblio.hfd -nk 000760 | SxmlIndent | more

Pour mettre un lien sur cette page dans le réseau Wicri

{{Explor lien
   |wiki=   *** parameter Area/wikiCode missing *** 
   |area=    IndiumV3
   |flux=    Chine
   |étape=   Analysis
   |type=    RBID
   |clé=     Pascal:11-0160896
   |texte=   Optimization of inverted tandem organic solar cells
}}

This area was generated with Dilib version V0.5.77.
Data generation: Mon Jun 9 10:27:54 2014. Site generation: Thu Mar 7 16:19:59 2024

	Serveur d'exploration sur l'Indium
	Attention, ce site est en cours de développement ! Attention, site généré par des moyens informatiques à partir de corpus bruts. Les informations ne sont donc pas validées.

Serveur d'exploration sur l'Indium

Optimization of inverted tandem organic solar cells

Optimization of inverted tandem organic solar cells

Descripteurs français

English descriptors

Abstract

Links toward previous steps (curation, corpus...)

Links to Exploration step

Le document en format XML

Pour manipuler ce document sous Unix (Dilib)

Pour mettre un lien sur cette page dans le réseau Wicri