Organic photovoltaic modules fabricated by an industrial gravure printing proofer
Identifieur interne : 000159 ( Chine/Analysis ); précédent : 000158; suivant : 000160Organic photovoltaic modules fabricated by an industrial gravure printing proofer
Auteurs : RBID : Pascal:13-0093534Descripteurs français
- Pascal (Inist)
- Cellule solaire organique, Panneau solaire, Système photovoltaïque, Evaluation performance, Couche active, Couche ITO, Addition étain, Revêtement, Conversion énergie, Taux conversion, Courant court circuit, Tension circuit ouvert, Optimisation, Couche interfaciale, Morphologie, Structure flexible, Imprimante, Thiophène dérivé polymère, Styrènesulfonique acide polymère, Styrènesulfonate polymère, Mélange polymère, Ester, Acide butyrique, Composé du fullerène, Oxyde d'indium, Matériau revêtu, Ethylène téréphtalate polymère, Aluminium, ITO, Procédé roll-to-roll, Couche de transport de trous.
- Wicri :
- concept : Imprimante, Aluminium.
English descriptors
- KwdEn :
- Active layer, Aluminium, Butyric acid, Coated material, Coatings, Conversion rate, Energy conversion, Ester, Ethylene terephthalate polymer, Flexible structure, Fullerene compounds, Hole transport layer, ITO layers, Indium oxide, Interfacial layer, Morphology, Open circuit voltage, Optimization, Organic solar cells, Performance evaluation, Photovoltaic array, Photovoltaic system, Polymer blends, Printer, Roll-to-roll process, Short circuit currents, Styrenesulfonate polymer, Styrenesulfonic acid polymer, Thiophene derivative polymer, Tin addition.
Abstract
Large-area, flexible organic photovoltaic (OPV) modules are fabricated successfully by gravure printing in air, using an industrial-scale printing proofer of similar performance to commercial roll-to-roll printing processes. Both the hole transport layer, poly-3,4-ethylenedioxy-thiophene:poly(styrene sulfonic-acid) (PEDOT:PSS), and the active layer, poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester (P3HT:PCBM), are successively printed on indium tin oxide (ITO) coated polyethylene terephthalate (ITO/PET) substrates with evaporated aluminum (Al) top electrodes. The 45 cm2 modules, composed of 5 cells connected in series, show power conversion efficiency (PCE) of over 1.0%, in which the short-circuit current (Jsc) and open-circuit voltage (Voc) are as high as 7.14 mA/cm2 and 2.74 V (0.55 V per cell), respectively. The PCEs could be potentially improved by the further optimization of the layer interface, layer morphology and flexible substrate properties. The results suggest that gravure printing may be a suitable technique for fast commercial processing of large-area, flexible OPVs with high output.
Links toward previous steps (curation, corpus...)
- to stream Main, to step Corpus: 001243
- to stream Main, to step Repository: 000766
- to stream Chine, to step Extraction: 000159
Links to Exploration step
Pascal:13-0093534Le document en format XML
<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en" level="a">Organic photovoltaic modules fabricated by an industrial gravure printing proofer</title><author><name>JUNLIANG YANG</name><affiliation wicri:level="1"><inist:fA14 i1="01"><s1>Bio21 Institute, University of Melbourne, 30 Flemington Road</s1><s2>Parkville, VIC 3010</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>4 aut.</sZ><sZ>5 aut.</sZ><sZ>6 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Parkville, VIC 3010</wicri:noRegion></affiliation><affiliation wicri:level="1"><inist:fA14 i1="02"><s1>CSIRO Materials Science and Engineering, Private Bag 10</s1><s2>Clayton South, VIC 3169</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>2 aut.</sZ><sZ>3 aut.</sZ><sZ>7 aut.</sZ><sZ>8 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Clayton South, VIC 3169</wicri:noRegion></affiliation><affiliation wicri:level="1"><inist:fA14 i1="03"><s1>Institute of Super Microstructure and Ultrafast Process, School of Physics and Electronics, Central South University</s1><s2>Changsha, Hunan 410083</s2><s3>CHN</s3><sZ>1 aut.</sZ></inist:fA14><country>République populaire de Chine</country><wicri:noRegion>Changsha, Hunan 410083</wicri:noRegion></affiliation></author><author><name sortKey="Vak, Doojin" uniqKey="Vak D">Doojin Vak</name><affiliation wicri:level="1"><inist:fA14 i1="02"><s1>CSIRO Materials Science and Engineering, Private Bag 10</s1><s2>Clayton South, VIC 3169</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>2 aut.</sZ><sZ>3 aut.</sZ><sZ>7 aut.</sZ><sZ>8 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Clayton South, VIC 3169</wicri:noRegion></affiliation></author><author><name sortKey="Clark, Noel" uniqKey="Clark N">Noel Clark</name><affiliation wicri:level="1"><inist:fA14 i1="02"><s1>CSIRO Materials Science and Engineering, Private Bag 10</s1><s2>Clayton South, VIC 3169</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>2 aut.</sZ><sZ>3 aut.</sZ><sZ>7 aut.</sZ><sZ>8 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Clayton South, VIC 3169</wicri:noRegion></affiliation></author><author><name sortKey="Subbiah, Jegadesan" uniqKey="Subbiah J">Jegadesan Subbiah</name><affiliation wicri:level="1"><inist:fA14 i1="01"><s1>Bio21 Institute, University of Melbourne, 30 Flemington Road</s1><s2>Parkville, VIC 3010</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>4 aut.</sZ><sZ>5 aut.</sZ><sZ>6 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Parkville, VIC 3010</wicri:noRegion></affiliation></author><author><name sortKey="Wong, Wallace W H" uniqKey="Wong W">Wallace W. H. Wong</name><affiliation wicri:level="1"><inist:fA14 i1="01"><s1>Bio21 Institute, University of Melbourne, 30 Flemington Road</s1><s2>Parkville, VIC 3010</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>4 aut.</sZ><sZ>5 aut.</sZ><sZ>6 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Parkville, VIC 3010</wicri:noRegion></affiliation></author><author><name sortKey="Jones, David J" uniqKey="Jones D">David J. Jones</name><affiliation wicri:level="1"><inist:fA14 i1="01"><s1>Bio21 Institute, University of Melbourne, 30 Flemington Road</s1><s2>Parkville, VIC 3010</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>4 aut.</sZ><sZ>5 aut.</sZ><sZ>6 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Parkville, VIC 3010</wicri:noRegion></affiliation></author><author><name sortKey="Watkins, Scott E" uniqKey="Watkins S">Scott E. Watkins</name><affiliation wicri:level="1"><inist:fA14 i1="02"><s1>CSIRO Materials Science and Engineering, Private Bag 10</s1><s2>Clayton South, VIC 3169</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>2 aut.</sZ><sZ>3 aut.</sZ><sZ>7 aut.</sZ><sZ>8 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Clayton South, VIC 3169</wicri:noRegion></affiliation></author><author><name sortKey="Wilson, Gerry" uniqKey="Wilson G">Gerry Wilson</name><affiliation wicri:level="1"><inist:fA14 i1="02"><s1>CSIRO Materials Science and Engineering, Private Bag 10</s1><s2>Clayton South, VIC 3169</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>2 aut.</sZ><sZ>3 aut.</sZ><sZ>7 aut.</sZ><sZ>8 aut.</sZ></inist:fA14><country>Australie</country><wicri:noRegion>Clayton South, VIC 3169</wicri:noRegion></affiliation></author></titleStmt><publicationStmt><idno type="inist">13-0093534</idno><date when="2013">2013</date><idno type="stanalyst">PASCAL 13-0093534 INIST</idno><idno type="RBID">Pascal:13-0093534</idno><idno type="wicri:Area/Main/Corpus">001243</idno><idno type="wicri:Area/Main/Repository">000766</idno><idno type="wicri:Area/Chine/Extraction">000159</idno></publicationStmt><seriesStmt><idno type="ISSN">0927-0248</idno><title level="j" type="abbreviated">Sol. energy mater. sol. cells</title><title level="j" type="main">Solar energy materials and solar cells</title></seriesStmt></fileDesc><profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Active layer</term><term>Aluminium</term><term>Butyric acid</term><term>Coated material</term><term>Coatings</term><term>Conversion rate</term><term>Energy conversion</term><term>Ester</term><term>Ethylene terephthalate polymer</term><term>Flexible structure</term><term>Fullerene compounds</term><term>Hole transport layer</term><term>ITO layers</term><term>Indium oxide</term><term>Interfacial layer</term><term>Morphology</term><term>Open circuit voltage</term><term>Optimization</term><term>Organic solar cells</term><term>Performance evaluation</term><term>Photovoltaic array</term><term>Photovoltaic system</term><term>Polymer blends</term><term>Printer</term><term>Roll-to-roll process</term><term>Short circuit currents</term><term>Styrenesulfonate polymer</term><term>Styrenesulfonic acid polymer</term><term>Thiophene derivative polymer</term><term>Tin addition</term></keywords><keywords scheme="Pascal" xml:lang="fr"><term>Cellule solaire organique</term><term>Panneau solaire</term><term>Système photovoltaïque</term><term>Evaluation performance</term><term>Couche active</term><term>Couche ITO</term><term>Addition étain</term><term>Revêtement</term><term>Conversion énergie</term><term>Taux conversion</term><term>Courant court circuit</term><term>Tension circuit ouvert</term><term>Optimisation</term><term>Couche interfaciale</term><term>Morphologie</term><term>Structure flexible</term><term>Imprimante</term><term>Thiophène dérivé polymère</term><term>Styrènesulfonique acide polymère</term><term>Styrènesulfonate polymère</term><term>Mélange polymère</term><term>Ester</term><term>Acide butyrique</term><term>Composé du fullerène</term><term>Oxyde d'indium</term><term>Matériau revêtu</term><term>Ethylène téréphtalate polymère</term><term>Aluminium</term><term>ITO</term><term>Procédé roll-to-roll</term><term>Couche de transport de trous</term></keywords><keywords scheme="Wicri" type="concept" xml:lang="fr"><term>Imprimante</term><term>Aluminium</term></keywords></textClass></profileDesc></teiHeader><front><div type="abstract" xml:lang="en">Large-area, flexible organic photovoltaic (OPV) modules are fabricated successfully by gravure printing in air, using an industrial-scale printing proofer of similar performance to commercial roll-to-roll printing processes. Both the hole transport layer, poly-3,4-ethylenedioxy-thiophene:poly(styrene sulfonic-acid) (PEDOT:PSS), and the active layer, poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester (P3HT:PCBM), are successively printed on indium tin oxide (ITO) coated polyethylene terephthalate (ITO/PET) substrates with evaporated aluminum (Al) top electrodes. The 45 cm<sup>2</sup> modules, composed of 5 cells connected in series, show power conversion efficiency (PCE) of over 1.0%, in which the short-circuit current (J<sub>sc</sub>) and open-circuit voltage (V<sub>oc</sub>) are as high as 7.14 mA/cm<sup>2</sup> and 2.74 V (0.55 V per cell), respectively. The PCEs could be potentially improved by the further optimization of the layer interface, layer morphology and flexible substrate properties. The results suggest that gravure printing may be a suitable technique for fast commercial processing of large-area, flexible OPVs with high output.</div></front></TEI><inist><standard h6="B"><pA><fA01 i1="01" i2="1"><s0>0927-0248</s0></fA01><fA03 i2="1"><s0>Sol. energy mater. sol. cells</s0></fA03><fA05><s2>109</s2></fA05><fA08 i1="01" i2="1" l="ENG"><s1>Organic photovoltaic modules fabricated by an industrial gravure printing proofer</s1></fA08><fA11 i1="01" i2="1"><s1>JUNLIANG YANG</s1></fA11><fA11 i1="02" i2="1"><s1>VAK (Doojin)</s1></fA11><fA11 i1="03" i2="1"><s1>CLARK (Noel)</s1></fA11><fA11 i1="04" i2="1"><s1>SUBBIAH (Jegadesan)</s1></fA11><fA11 i1="05" i2="1"><s1>WONG (Wallace W. H.)</s1></fA11><fA11 i1="06" i2="1"><s1>JONES (David J.)</s1></fA11><fA11 i1="07" i2="1"><s1>WATKINS (Scott E.)</s1></fA11><fA11 i1="08" i2="1"><s1>WILSON (Gerry)</s1></fA11><fA14 i1="01"><s1>Bio21 Institute, University of Melbourne, 30 Flemington Road</s1><s2>Parkville, VIC 3010</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>4 aut.</sZ><sZ>5 aut.</sZ><sZ>6 aut.</sZ></fA14><fA14 i1="02"><s1>CSIRO Materials Science and Engineering, Private Bag 10</s1><s2>Clayton South, VIC 3169</s2><s3>AUS</s3><sZ>1 aut.</sZ><sZ>2 aut.</sZ><sZ>3 aut.</sZ><sZ>7 aut.</sZ><sZ>8 aut.</sZ></fA14><fA14 i1="03"><s1>Institute of Super Microstructure and Ultrafast Process, School of Physics and Electronics, Central South University</s1><s2>Changsha, Hunan 410083</s2><s3>CHN</s3><sZ>1 aut.</sZ></fA14><fA20><s1>47-55</s1></fA20><fA21><s1>2013</s1></fA21><fA23 i1="01"><s0>ENG</s0></fA23><fA43 i1="01"><s1>INIST</s1><s2>18016</s2><s5>354000182524870070</s5></fA43><fA44><s0>0000</s0><s1>© 2013 INIST-CNRS. All rights reserved.</s1></fA44><fA45><s0>42 ref.</s0></fA45><fA47 i1="01" i2="1"><s0>13-0093534</s0></fA47><fA60><s1>P</s1></fA60><fA61><s0>A</s0></fA61><fA64 i1="01" i2="1"><s0>Solar energy materials and solar cells</s0></fA64><fA66 i1="01"><s0>NLD</s0></fA66><fC01 i1="01" l="ENG"><s0>Large-area, flexible organic photovoltaic (OPV) modules are fabricated successfully by gravure printing in air, using an industrial-scale printing proofer of similar performance to commercial roll-to-roll printing processes. Both the hole transport layer, poly-3,4-ethylenedioxy-thiophene:poly(styrene sulfonic-acid) (PEDOT:PSS), and the active layer, poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester (P3HT:PCBM), are successively printed on indium tin oxide (ITO) coated polyethylene terephthalate (ITO/PET) substrates with evaporated aluminum (Al) top electrodes. The 45 cm<sup>2</sup> modules, composed of 5 cells connected in series, show power conversion efficiency (PCE) of over 1.0%, in which the short-circuit current (J<sub>sc</sub>) and open-circuit voltage (V<sub>oc</sub>) are as high as 7.14 mA/cm<sup>2</sup> and 2.74 V (0.55 V per cell), respectively. The PCEs could be potentially improved by the further optimization of the layer interface, layer morphology and flexible substrate properties. The results suggest that gravure printing may be a suitable technique for fast commercial processing of large-area, flexible OPVs with high output.</s0></fC01><fC02 i1="01" i2="X"><s0>001D06C02D1</s0></fC02><fC02 i1="02" i2="X"><s0>001D05I03D</s0></fC02><fC02 i1="03" i2="X"><s0>001D06C02D2</s0></fC02><fC02 i1="04" i2="X"><s0>230</s0></fC02><fC03 i1="01" i2="3" l="FRE"><s0>Cellule solaire organique</s0><s5>01</s5></fC03><fC03 i1="01" i2="3" l="ENG"><s0>Organic solar cells</s0><s5>01</s5></fC03><fC03 i1="02" i2="X" l="FRE"><s0>Panneau solaire</s0><s5>02</s5></fC03><fC03 i1="02" i2="X" l="ENG"><s0>Photovoltaic array</s0><s5>02</s5></fC03><fC03 i1="02" i2="X" l="SPA"><s0>Panel solar</s0><s5>02</s5></fC03><fC03 i1="03" i2="X" l="FRE"><s0>Système photovoltaïque</s0><s5>03</s5></fC03><fC03 i1="03" i2="X" l="ENG"><s0>Photovoltaic system</s0><s5>03</s5></fC03><fC03 i1="03" i2="X" l="SPA"><s0>Sistema fotovoltaico</s0><s5>03</s5></fC03><fC03 i1="04" i2="X" l="FRE"><s0>Evaluation performance</s0><s5>04</s5></fC03><fC03 i1="04" i2="X" l="ENG"><s0>Performance evaluation</s0><s5>04</s5></fC03><fC03 i1="04" i2="X" l="SPA"><s0>Evaluación prestación</s0><s5>04</s5></fC03><fC03 i1="05" i2="X" l="FRE"><s0>Couche active</s0><s5>05</s5></fC03><fC03 i1="05" i2="X" l="ENG"><s0>Active layer</s0><s5>05</s5></fC03><fC03 i1="05" i2="X" l="SPA"><s0>Capa activa</s0><s5>05</s5></fC03><fC03 i1="06" i2="3" l="FRE"><s0>Couche ITO</s0><s5>06</s5></fC03><fC03 i1="06" i2="3" l="ENG"><s0>ITO layers</s0><s5>06</s5></fC03><fC03 i1="07" i2="X" l="FRE"><s0>Addition étain</s0><s5>07</s5></fC03><fC03 i1="07" i2="X" l="ENG"><s0>Tin addition</s0><s5>07</s5></fC03><fC03 i1="07" i2="X" l="SPA"><s0>Adición estaño</s0><s5>07</s5></fC03><fC03 i1="08" i2="X" l="FRE"><s0>Revêtement</s0><s5>08</s5></fC03><fC03 i1="08" i2="X" l="ENG"><s0>Coatings</s0><s5>08</s5></fC03><fC03 i1="08" i2="X" l="SPA"><s0>Revestimiento</s0><s5>08</s5></fC03><fC03 i1="09" i2="X" l="FRE"><s0>Conversion énergie</s0><s5>09</s5></fC03><fC03 i1="09" i2="X" l="ENG"><s0>Energy conversion</s0><s5>09</s5></fC03><fC03 i1="09" i2="X" l="SPA"><s0>Conversión energética</s0><s5>09</s5></fC03><fC03 i1="10" i2="X" l="FRE"><s0>Taux conversion</s0><s5>10</s5></fC03><fC03 i1="10" i2="X" l="ENG"><s0>Conversion rate</s0><s5>10</s5></fC03><fC03 i1="10" i2="X" l="SPA"><s0>Factor conversión</s0><s5>10</s5></fC03><fC03 i1="11" i2="3" l="FRE"><s0>Courant court circuit</s0><s5>11</s5></fC03><fC03 i1="11" i2="3" l="ENG"><s0>Short circuit currents</s0><s5>11</s5></fC03><fC03 i1="12" i2="3" l="FRE"><s0>Tension circuit ouvert</s0><s5>12</s5></fC03><fC03 i1="12" i2="3" l="ENG"><s0>Open circuit voltage</s0><s5>12</s5></fC03><fC03 i1="13" i2="X" l="FRE"><s0>Optimisation</s0><s5>13</s5></fC03><fC03 i1="13" i2="X" l="ENG"><s0>Optimization</s0><s5>13</s5></fC03><fC03 i1="13" i2="X" l="SPA"><s0>Optimización</s0><s5>13</s5></fC03><fC03 i1="14" i2="X" l="FRE"><s0>Couche interfaciale</s0><s5>14</s5></fC03><fC03 i1="14" i2="X" l="ENG"><s0>Interfacial layer</s0><s5>14</s5></fC03><fC03 i1="14" i2="X" l="SPA"><s0>Capa interfacial</s0><s5>14</s5></fC03><fC03 i1="15" i2="X" l="FRE"><s0>Morphologie</s0><s5>15</s5></fC03><fC03 i1="15" i2="X" l="ENG"><s0>Morphology</s0><s5>15</s5></fC03><fC03 i1="15" i2="X" l="SPA"><s0>Morfología</s0><s5>15</s5></fC03><fC03 i1="16" i2="X" l="FRE"><s0>Structure flexible</s0><s5>16</s5></fC03><fC03 i1="16" i2="X" l="ENG"><s0>Flexible structure</s0><s5>16</s5></fC03><fC03 i1="16" i2="X" l="SPA"><s0>Estructura flexible</s0><s5>16</s5></fC03><fC03 i1="17" i2="X" l="FRE"><s0>Imprimante</s0><s5>17</s5></fC03><fC03 i1="17" i2="X" l="ENG"><s0>Printer</s0><s5>17</s5></fC03><fC03 i1="17" i2="X" l="SPA"><s0>Impresora</s0><s5>17</s5></fC03><fC03 i1="18" i2="X" l="FRE"><s0>Thiophène dérivé polymère</s0><s2>NK</s2><s5>22</s5></fC03><fC03 i1="18" i2="X" l="ENG"><s0>Thiophene derivative polymer</s0><s2>NK</s2><s5>22</s5></fC03><fC03 i1="18" i2="X" l="SPA"><s0>Tiofeno derivado polímero</s0><s2>NK</s2><s5>22</s5></fC03><fC03 i1="19" i2="X" l="FRE"><s0>Styrènesulfonique acide polymère</s0><s2>NK</s2><s5>23</s5></fC03><fC03 i1="19" i2="X" l="ENG"><s0>Styrenesulfonic acid polymer</s0><s2>NK</s2><s5>23</s5></fC03><fC03 i1="19" i2="X" l="SPA"><s0>Estireno sulfónico ácido polímero</s0><s2>NK</s2><s5>23</s5></fC03><fC03 i1="20" i2="X" l="FRE"><s0>Styrènesulfonate polymère</s0><s2>NK</s2><s5>24</s5></fC03><fC03 i1="20" i2="X" l="ENG"><s0>Styrenesulfonate polymer</s0><s2>NK</s2><s5>24</s5></fC03><fC03 i1="20" i2="X" l="SPA"><s0>Estireno sulfonato polímero</s0><s2>NK</s2><s5>24</s5></fC03><fC03 i1="21" i2="3" l="FRE"><s0>Mélange polymère</s0><s5>25</s5></fC03><fC03 i1="21" i2="3" l="ENG"><s0>Polymer blends</s0><s5>25</s5></fC03><fC03 i1="22" i2="X" l="FRE"><s0>Ester</s0><s5>26</s5></fC03><fC03 i1="22" i2="X" l="ENG"><s0>Ester</s0><s5>26</s5></fC03><fC03 i1="22" i2="X" l="SPA"><s0>Ester</s0><s5>26</s5></fC03><fC03 i1="23" i2="X" l="FRE"><s0>Acide butyrique</s0><s2>NK</s2><s5>27</s5></fC03><fC03 i1="23" i2="X" l="ENG"><s0>Butyric acid</s0><s2>NK</s2><s5>27</s5></fC03><fC03 i1="23" i2="X" l="SPA"><s0>Butírico ácido</s0><s2>NK</s2><s5>27</s5></fC03><fC03 i1="24" i2="3" l="FRE"><s0>Composé du fullerène</s0><s5>28</s5></fC03><fC03 i1="24" i2="3" l="ENG"><s0>Fullerene compounds</s0><s5>28</s5></fC03><fC03 i1="25" i2="X" l="FRE"><s0>Oxyde d'indium</s0><s5>29</s5></fC03><fC03 i1="25" i2="X" l="ENG"><s0>Indium oxide</s0><s5>29</s5></fC03><fC03 i1="25" i2="X" l="SPA"><s0>Indio óxido</s0><s5>29</s5></fC03><fC03 i1="26" i2="X" l="FRE"><s0>Matériau revêtu</s0><s5>30</s5></fC03><fC03 i1="26" i2="X" l="ENG"><s0>Coated material</s0><s5>30</s5></fC03><fC03 i1="26" i2="X" l="SPA"><s0>Material revestido</s0><s5>30</s5></fC03><fC03 i1="27" i2="X" l="FRE"><s0>Ethylène téréphtalate polymère</s0><s2>NK</s2><s5>31</s5></fC03><fC03 i1="27" i2="X" l="ENG"><s0>Ethylene terephthalate polymer</s0><s2>NK</s2><s5>31</s5></fC03><fC03 i1="27" i2="X" l="SPA"><s0>Etileno tereftalato polímero</s0><s2>NK</s2><s5>31</s5></fC03><fC03 i1="28" i2="X" l="FRE"><s0>Aluminium</s0><s2>NC</s2><s2>FR</s2><s2>FX</s2><s5>32</s5></fC03><fC03 i1="28" i2="X" l="ENG"><s0>Aluminium</s0><s2>NC</s2><s2>FR</s2><s2>FX</s2><s5>32</s5></fC03><fC03 i1="28" i2="X" l="SPA"><s0>Aluminio</s0><s2>NC</s2><s2>FR</s2><s2>FX</s2><s5>32</s5></fC03><fC03 i1="29" i2="X" l="FRE"><s0>ITO</s0><s4>INC</s4><s5>82</s5></fC03><fC03 i1="30" i2="X" l="FRE"><s0>Procédé roll-to-roll</s0><s4>CD</s4><s5>96</s5></fC03><fC03 i1="30" i2="X" l="ENG"><s0>Roll-to-roll process</s0><s4>CD</s4><s5>96</s5></fC03><fC03 i1="31" i2="X" l="FRE"><s0>Couche de transport de trous</s0><s4>CD</s4><s5>97</s5></fC03><fC03 i1="31" i2="X" l="ENG"><s0>Hole transport layer</s0><s4>CD</s4><s5>97</s5></fC03><fN21><s1>063</s1></fN21><fN44 i1="01"><s1>OTO</s1></fN44><fN82><s1>OTO</s1></fN82></pA></standard></inist></record>Pour manipuler ce document sous Unix (Dilib)
EXPLOR_STEP=IndiumV3/Data/Chine/Analysis
HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 000159 | SxmlIndent | more
Ou
HfdSelect -h $EXPLOR_AREA/Data/Chine/Analysis/biblio.hfd -nk 000159 | SxmlIndent | more
Pour mettre un lien sur cette page dans le réseau Wicri
{{Explor lien
|wiki= *** parameter Area/wikiCode missing ***
|area= IndiumV3
|flux= Chine
|étape= Analysis
|type= RBID
|clé= Pascal:13-0093534
|texte= Organic photovoltaic modules fabricated by an industrial gravure printing proofer
}}
| This area was generated with Dilib version V0.5.77. |  |