An Experimental Evaluation of the Force Requirements for Robotic Mastoidectomy
Identifieur interne : 001D72 ( Main/Exploration ); précédent : 001D71; suivant : 001D73An Experimental Evaluation of the Force Requirements for Robotic Mastoidectomy
Auteurs : Neal P. Dillon ; Louis B. Kratchman ; Mary S. Dietrich ; Robert F. Labadie ; Robert J. Webster ; Thomas J. WithrowSource :
- Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology [ 1531-7129 ] ; 2013.
Abstract
During robotic milling of the temporal bone, forces on the cutting burr may be lowered by choice of cutting parameters.
Robotic bone removal systems are used in orthopedic procedures but they are currently not accurate enough for safe use in otologic surgery. We propose the use of a bone attached milling robot to achieve the required accuracy and speed. To design such a robot and plan its milling trajectories, it is necessary to predict the forces that the robot must exert and withstand under likely cutting conditions.
We measured forces during bone removal for several surgical burr types, drill angles, depths of cut, cutting velocities, and bone types (cortical/surface bone and mastoid) on human temporal bone specimens.
Lower forces were observed for 5 mm diameter burrs compared to 3 mm burrs for a given bone removal rate. Higher linear cutting velocities and greater cutting depths independently resulted in higher forces. For combinations of velocities and depths that resulted in the same overall bone removal rate, lower forces were observed in parameter sets that combined higher cutting velocities and shallower depths. Lower mean forces and higher variability were observed in the mastoid compared with cortical/surface bone.
Forces during robotic milling of the temporal bone can be predicted from the parameter sets tested in this study. This information can be used to guide the design of a sufficiently rigid and powerful bone-attached milling robot and to plan efficient milling trajectories. To reduce the time of the surgical intervention without creating very large forces, high linear cutting velocities may be combined with shallow depths of cut. Faster and deeper cuts may be used in mastoid bone compared to cortical bone for a chosen force threshold.
Url:
DOI: 10.1097/MAO.0b013e318291c76b
PubMed: 23787968
PubMed Central: 3761064
Affiliations:
Links toward previous steps (curation, corpus...)
- to stream Pmc, to step Corpus: 001704
- to stream Pmc, to step Curation: 001704
- to stream Pmc, to step Checkpoint: 001415
- to stream Ncbi, to step Merge: 002753
- to stream Ncbi, to step Curation: 002753
- to stream Ncbi, to step Checkpoint: 002753
- to stream Main, to step Merge: 001D94
- to stream Main, to step Curation: 001D72
Le document en format XML
<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en">An Experimental Evaluation of the Force Requirements for Robotic Mastoidectomy</title>
<author><name sortKey="Dillon, Neal P" sort="Dillon, Neal P" uniqKey="Dillon N" first="Neal P." last="Dillon">Neal P. Dillon</name>
</author>
<author><name sortKey="Kratchman, Louis B" sort="Kratchman, Louis B" uniqKey="Kratchman L" first="Louis B." last="Kratchman">Louis B. Kratchman</name>
</author>
<author><name sortKey="Dietrich, Mary S" sort="Dietrich, Mary S" uniqKey="Dietrich M" first="Mary S." last="Dietrich">Mary S. Dietrich</name>
</author>
<author><name sortKey="Labadie, Robert F" sort="Labadie, Robert F" uniqKey="Labadie R" first="Robert F." last="Labadie">Robert F. Labadie</name>
</author>
<author><name sortKey="Webster, Robert J" sort="Webster, Robert J" uniqKey="Webster R" first="Robert J." last="Webster">Robert J. Webster</name>
</author>
<author><name sortKey="Withrow, Thomas J" sort="Withrow, Thomas J" uniqKey="Withrow T" first="Thomas J." last="Withrow">Thomas J. Withrow</name>
</author>
</titleStmt>
<publicationStmt><idno type="wicri:source">PMC</idno>
<idno type="pmid">23787968</idno>
<idno type="pmc">3761064</idno>
<idno type="url">http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3761064</idno>
<idno type="RBID">PMC:3761064</idno>
<idno type="doi">10.1097/MAO.0b013e318291c76b</idno>
<date when="2013">2013</date>
<idno type="wicri:Area/Pmc/Corpus">001704</idno>
<idno type="wicri:Area/Pmc/Curation">001704</idno>
<idno type="wicri:Area/Pmc/Checkpoint">001415</idno>
<idno type="wicri:Area/Ncbi/Merge">002753</idno>
<idno type="wicri:Area/Ncbi/Curation">002753</idno>
<idno type="wicri:Area/Ncbi/Checkpoint">002753</idno>
<idno type="wicri:doubleKey">1531-7129:2013:Dillon N:an:experimental:evaluation</idno>
<idno type="wicri:Area/Main/Merge">001D94</idno>
<idno type="wicri:Area/Main/Curation">001D72</idno>
<idno type="wicri:Area/Main/Exploration">001D72</idno>
</publicationStmt>
<sourceDesc><biblStruct><analytic><title xml:lang="en" level="a" type="main">An Experimental Evaluation of the Force Requirements for Robotic Mastoidectomy</title>
<author><name sortKey="Dillon, Neal P" sort="Dillon, Neal P" uniqKey="Dillon N" first="Neal P." last="Dillon">Neal P. Dillon</name>
</author>
<author><name sortKey="Kratchman, Louis B" sort="Kratchman, Louis B" uniqKey="Kratchman L" first="Louis B." last="Kratchman">Louis B. Kratchman</name>
</author>
<author><name sortKey="Dietrich, Mary S" sort="Dietrich, Mary S" uniqKey="Dietrich M" first="Mary S." last="Dietrich">Mary S. Dietrich</name>
</author>
<author><name sortKey="Labadie, Robert F" sort="Labadie, Robert F" uniqKey="Labadie R" first="Robert F." last="Labadie">Robert F. Labadie</name>
</author>
<author><name sortKey="Webster, Robert J" sort="Webster, Robert J" uniqKey="Webster R" first="Robert J." last="Webster">Robert J. Webster</name>
</author>
<author><name sortKey="Withrow, Thomas J" sort="Withrow, Thomas J" uniqKey="Withrow T" first="Thomas J." last="Withrow">Thomas J. Withrow</name>
</author>
</analytic>
<series><title level="j">Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology</title>
<idno type="ISSN">1531-7129</idno>
<idno type="eISSN">1537-4505</idno>
<imprint><date when="2013">2013</date>
</imprint>
</series>
</biblStruct>
</sourceDesc>
</fileDesc>
<profileDesc><textClass></textClass>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en"><sec id="S1"><title>Hypothesis</title>
<p id="P1">During robotic milling of the temporal bone, forces on the cutting burr may be lowered by choice of cutting parameters.</p>
</sec>
<sec id="S2"><title>Background</title>
<p id="P2">Robotic bone removal systems are used in orthopedic procedures but they are currently not accurate enough for safe use in otologic surgery. We propose the use of a bone attached milling robot to achieve the required accuracy and speed. To design such a robot and plan its milling trajectories, it is necessary to predict the forces that the robot must exert and withstand under likely cutting conditions.</p>
</sec>
<sec id="S3"><title>Materials and Methods</title>
<p id="P3">We measured forces during bone removal for several surgical burr types, drill angles, depths of cut, cutting velocities, and bone types (cortical/surface bone and mastoid) on human temporal bone specimens.</p>
</sec>
<sec id="S4"><title>Results</title>
<p id="P4">Lower forces were observed for 5 mm diameter burrs compared to 3 mm burrs for a given bone removal rate. Higher linear cutting velocities and greater cutting depths independently resulted in higher forces. For combinations of velocities and depths that resulted in the same overall bone removal rate, lower forces were observed in parameter sets that combined higher cutting velocities and shallower depths. Lower mean forces and higher variability were observed in the mastoid compared with cortical/surface bone.</p>
</sec>
<sec id="S5"><title>Conclusion</title>
<p id="P5">Forces during robotic milling of the temporal bone can be predicted from the parameter sets tested in this study. This information can be used to guide the design of a sufficiently rigid and powerful bone-attached milling robot and to plan efficient milling trajectories. To reduce the time of the surgical intervention without creating very large forces, high linear cutting velocities may be combined with shallow depths of cut. Faster and deeper cuts may be used in mastoid bone compared to cortical bone for a chosen force threshold.</p>
</sec>
</div>
</front>
</TEI>
<affiliations><list></list>
<tree><noCountry><name sortKey="Dietrich, Mary S" sort="Dietrich, Mary S" uniqKey="Dietrich M" first="Mary S." last="Dietrich">Mary S. Dietrich</name>
<name sortKey="Dillon, Neal P" sort="Dillon, Neal P" uniqKey="Dillon N" first="Neal P." last="Dillon">Neal P. Dillon</name>
<name sortKey="Kratchman, Louis B" sort="Kratchman, Louis B" uniqKey="Kratchman L" first="Louis B." last="Kratchman">Louis B. Kratchman</name>
<name sortKey="Labadie, Robert F" sort="Labadie, Robert F" uniqKey="Labadie R" first="Robert F." last="Labadie">Robert F. Labadie</name>
<name sortKey="Webster, Robert J" sort="Webster, Robert J" uniqKey="Webster R" first="Robert J." last="Webster">Robert J. Webster</name>
<name sortKey="Withrow, Thomas J" sort="Withrow, Thomas J" uniqKey="Withrow T" first="Thomas J." last="Withrow">Thomas J. Withrow</name>
</noCountry>
</tree>
</affiliations>
</record>
Pour manipuler ce document sous Unix (Dilib)
EXPLOR_STEP=$WICRI_ROOT/Ticri/CIDE/explor/HapticV1/Data/Main/Exploration
HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 001D72 | SxmlIndent | more
Ou
HfdSelect -h $EXPLOR_AREA/Data/Main/Exploration/biblio.hfd -nk 001D72 | SxmlIndent | more
Pour mettre un lien sur cette page dans le réseau Wicri
{{Explor lien |wiki= Ticri/CIDE |area= HapticV1 |flux= Main |étape= Exploration |type= RBID |clé= PMC:3761064 |texte= An Experimental Evaluation of the Force Requirements for Robotic Mastoidectomy }}
Pour générer des pages wiki
HfdIndexSelect -h $EXPLOR_AREA/Data/Main/Exploration/RBID.i -Sk "pubmed:23787968" \ | HfdSelect -Kh $EXPLOR_AREA/Data/Main/Exploration/biblio.hfd \ | NlmPubMed2Wicri -a HapticV1
![]() | This area was generated with Dilib version V0.6.23. | ![]() |