EdenteV2, Istex, Corpus, bibRecord, 002542

Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures

Identifieur interne : 002542 ( Istex/Corpus ); précédent : 002541; suivant : 002543

Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures

Auteurs : Tsau-Mau Chou ; Angelo A. Caputo ; Dorsey J. Moore ; Bin Xiao

Source :

The Journal of Prosthetic Dentistry [ 0022-3913 ] ; 1989.

RBID : ISTEX:4C433BE4C9EF7D7345340242CCD61569FB99C340

English descriptors

Abstract

Abstract: This investigation photoelastically compared the load-transfer characteristics of various bilateral distal-extension removable partial denture designs embodying intracoronal attachments and clasp assemblies. Six distal-extension designs that included the RPI clasp assembly, cast circumferential clasp, P.D. locking semiprecision, Thompson dowel nonlocking semiprecision, and McCollum and Stern G/L precision attachments were tested. Each prosthesis was subjected to various simulated occlusal loads. Evaluation of the load-transfer characteristics of the various designs was based on comparison of the recorded isochromatic fringe distributions. The RPI clasp assembly generated the most uniform stresses. In general, the four intracoronal retainer frameworks produced higher stresses than did the two clasp frameworks. The highest stresses were developed by the Stern G/L precision attachment.

Url:

https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/fulltext/pdf

DOI: 10.1016/0022-3913(89)90339-9

Links to Exploration step

ISTEX:4C433BE4C9EF7D7345340242CCD61569FB99C340

Le document en format XML

<record><TEI wicri:istexFullTextTei="biblStruct"><teiHeader><fileDesc><titleStmt><title xml:lang="en">Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
<author><name sortKey="Chou, Tsau Mau" sort="Chou, Tsau Mau" uniqKey="Chou T" first="Tsau-Mau" last="Chou">Tsau-Mau Chou</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Caputo, Angelo A" sort="Caputo, Angelo A" uniqKey="Caputo A" first="Angelo A." last="Caputo">Angelo A. Caputo</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Moore, Dorsey J" sort="Moore, Dorsey J" uniqKey="Moore D" first="Dorsey J." last="Moore">Dorsey J. Moore</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Xiao, Bin" sort="Xiao, Bin" uniqKey="Xiao B" first="Bin" last="Xiao">Bin Xiao</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
</titleStmt>
<publicationStmt><idno type="wicri:source">ISTEX</idno>
<idno type="RBID">ISTEX:4C433BE4C9EF7D7345340242CCD61569FB99C340</idno>
<date when="1989" year="1989">1989</date>
<idno type="doi">10.1016/0022-3913(89)90339-9</idno>
<idno type="url">https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/fulltext/pdf</idno>
<idno type="wicri:Area/Istex/Corpus">002542</idno>
<idno type="wicri:explorRef" wicri:stream="Istex" wicri:step="Corpus" wicri:corpus="ISTEX">002542</idno>
</publicationStmt>
<sourceDesc><biblStruct><analytic><title level="a" type="main" xml:lang="en">Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
<author><name sortKey="Chou, Tsau Mau" sort="Chou, Tsau Mau" uniqKey="Chou T" first="Tsau-Mau" last="Chou">Tsau-Mau Chou</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Caputo, Angelo A" sort="Caputo, Angelo A" uniqKey="Caputo A" first="Angelo A." last="Caputo">Angelo A. Caputo</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Moore, Dorsey J" sort="Moore, Dorsey J" uniqKey="Moore D" first="Dorsey J." last="Moore">Dorsey J. Moore</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Xiao, Bin" sort="Xiao, Bin" uniqKey="Xiao B" first="Bin" last="Xiao">Bin Xiao</name>
<affiliation><mods:affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</mods:affiliation>
</affiliation>
</author>
</analytic>
<monogr></monogr>
<series><title level="j">The Journal of Prosthetic Dentistry</title>
<title level="j" type="abbrev">YMPR</title>
<idno type="ISSN">0022-3913</idno>
<imprint><publisher>ELSEVIER</publisher>
<date type="published" when="1989">1989</date>
<biblScope unit="volume">62</biblScope>
<biblScope unit="issue">3</biblScope>
<biblScope unit="page" from="313">313</biblScope>
<biblScope unit="page" to="319">319</biblScope>
</imprint>
<idno type="ISSN">0022-3913</idno>
</series>
</biblStruct>
</sourceDesc>
<seriesStmt><idno type="ISSN">0022-3913</idno>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>Abutment</term>
<term>Abutment teeth</term>
<term>Abutment tooth</term>
<term>Anterior region</term>
<term>Apical</term>
<term>Attachment</term>
<term>Canine</term>
<term>Circumferential</term>
<term>Clasp</term>
<term>Clasp designs</term>
<term>Dentistry</term>
<term>Denture</term>
<term>Denture base</term>
<term>Denture designs</term>
<term>Distal aspect</term>
<term>Distal crest</term>
<term>Distal load</term>
<term>Dowel</term>
<term>Edentulous</term>
<term>Edentulous ridge</term>
<term>High stress</term>
<term>Higher stresses</term>
<term>Intracoronal</term>
<term>Intracoronal retainers</term>
<term>Lingual</term>
<term>Lingual loads</term>
<term>Long axes</term>
<term>Mccollum</term>
<term>Mccollum attachment</term>
<term>Mesial</term>
<term>Moderate stress</term>
<term>Nonlocking</term>
<term>Occlusal</term>
<term>Other regions</term>
<term>Partial dentures</term>
<term>Photoelastic</term>
<term>Photoelastic analysis</term>
<term>Precision attachment designs</term>
<term>Precision attachments</term>
<term>Premolar</term>
<term>Premolar root</term>
<term>Prosthet</term>
<term>Prosthet dent</term>
<term>Prosthetic dentistry</term>
<term>Removable</term>
<term>Retainer</term>
<term>Semiprecision</term>
<term>Semiprecision retainers</term>
<term>Thompson dowel</term>
<term>Thompson dowel nonlocking semiprecision retainer</term>
<term>Uniform stress</term>
<term>Vertical load</term>
<term>Vertical loads</term>
</keywords>
<keywords scheme="Teeft" xml:lang="en"><term>Abutment</term>
<term>Abutment teeth</term>
<term>Abutment tooth</term>
<term>Anterior region</term>
<term>Apical</term>
<term>Attachment</term>
<term>Canine</term>
<term>Circumferential</term>
<term>Clasp</term>
<term>Clasp designs</term>
<term>Dentistry</term>
<term>Denture</term>
<term>Denture base</term>
<term>Denture designs</term>
<term>Distal aspect</term>
<term>Distal crest</term>
<term>Distal load</term>
<term>Dowel</term>
<term>Edentulous</term>
<term>Edentulous ridge</term>
<term>High stress</term>
<term>Higher stresses</term>
<term>Intracoronal</term>
<term>Intracoronal retainers</term>
<term>Lingual</term>
<term>Lingual loads</term>
<term>Long axes</term>
<term>Mccollum</term>
<term>Mccollum attachment</term>
<term>Mesial</term>
<term>Moderate stress</term>
<term>Nonlocking</term>
<term>Occlusal</term>
<term>Other regions</term>
<term>Partial dentures</term>
<term>Photoelastic</term>
<term>Photoelastic analysis</term>
<term>Precision attachment designs</term>
<term>Precision attachments</term>
<term>Premolar</term>
<term>Premolar root</term>
<term>Prosthet</term>
<term>Prosthet dent</term>
<term>Prosthetic dentistry</term>
<term>Removable</term>
<term>Retainer</term>
<term>Semiprecision</term>
<term>Semiprecision retainers</term>
<term>Thompson dowel</term>
<term>Thompson dowel nonlocking semiprecision retainer</term>
<term>Uniform stress</term>
<term>Vertical load</term>
<term>Vertical loads</term>
</keywords>
</textClass>
<langUsage><language ident="en">en</language>
</langUsage>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en">Abstract: This investigation photoelastically compared the load-transfer characteristics of various bilateral distal-extension removable partial denture designs embodying intracoronal attachments and clasp assemblies. Six distal-extension designs that included the RPI clasp assembly, cast circumferential clasp, P.D. locking semiprecision, Thompson dowel nonlocking semiprecision, and McCollum and Stern G/L precision attachments were tested. Each prosthesis was subjected to various simulated occlusal loads. Evaluation of the load-transfer characteristics of the various designs was based on comparison of the recorded isochromatic fringe distributions. The RPI clasp assembly generated the most uniform stresses. In general, the four intracoronal retainer frameworks produced higher stresses than did the two clasp frameworks. The highest stresses were developed by the Stern G/L precision attachment.</div>
</front>
</TEI>
<istex><corpusName>elsevier</corpusName>
<keywords><teeft><json:string>abutment</json:string>
<json:string>denture</json:string>
<json:string>premolar</json:string>
<json:string>clasp</json:string>
<json:string>retainer</json:string>
<json:string>semiprecision</json:string>
<json:string>photoelastic</json:string>
<json:string>abutment teeth</json:string>
<json:string>circumferential</json:string>
<json:string>mesial</json:string>
<json:string>removable</json:string>
<json:string>higher stresses</json:string>
<json:string>moderate stress</json:string>
<json:string>vertical load</json:string>
<json:string>occlusal</json:string>
<json:string>intracoronal</json:string>
<json:string>prosthet</json:string>
<json:string>apical</json:string>
<json:string>mccollum</json:string>
<json:string>denture base</json:string>
<json:string>nonlocking</json:string>
<json:string>lingual</json:string>
<json:string>prosthet dent</json:string>
<json:string>dentistry</json:string>
<json:string>canine</json:string>
<json:string>uniform stress</json:string>
<json:string>partial dentures</json:string>
<json:string>thompson dowel nonlocking semiprecision retainer</json:string>
<json:string>precision attachments</json:string>
<json:string>distal load</json:string>
<json:string>photoelastic analysis</json:string>
<json:string>edentulous ridge</json:string>
<json:string>abutment tooth</json:string>
<json:string>high stress</json:string>
<json:string>semiprecision retainers</json:string>
<json:string>denture designs</json:string>
<json:string>edentulous</json:string>
<json:string>attachment</json:string>
<json:string>distal aspect</json:string>
<json:string>vertical loads</json:string>
<json:string>other regions</json:string>
<json:string>long axes</json:string>
<json:string>prosthetic dentistry</json:string>
<json:string>mccollum attachment</json:string>
<json:string>distal crest</json:string>
<json:string>premolar root</json:string>
<json:string>anterior region</json:string>
<json:string>lingual loads</json:string>
<json:string>clasp designs</json:string>
<json:string>thompson dowel</json:string>
<json:string>precision attachment designs</json:string>
<json:string>intracoronal retainers</json:string>
<json:string>dowel</json:string>
</teeft>
</keywords>
<author><json:item><name>Tsau-Mau Chou D.M.D., M.Sc.D., D.Sc.D.</name>
<affiliations><json:string>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</json:string>
</affiliations>
</json:item>
<json:item><name>Angelo A. Caputo Ph.D.</name>
<affiliations><json:string>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</json:string>
</affiliations>
</json:item>
<json:item><name>Dorsey J. Moore D.D.S.</name>
<affiliations><json:string>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</json:string>
</affiliations>
</json:item>
<json:item><name>Bin Xiao B.D.S.</name>
<affiliations><json:string>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</json:string>
</affiliations>
</json:item>
</author>
<subject><json:item><lang><json:string>eng</json:string>
</lang>
<value>Removable prosthodontics</value>
</json:item>
</subject>
<articleId><json:string>89903399</json:string>
</articleId>
<arkIstex>ark:/67375/6H6-D2QSC1VK-8</arkIstex>
<language><json:string>eng</json:string>
</language>
<originalGenre><json:string>Full-length article</json:string>
</originalGenre>
<abstract>Abstract: This investigation photoelastically compared the load-transfer characteristics of various bilateral distal-extension removable partial denture designs embodying intracoronal attachments and clasp assemblies. Six distal-extension designs that included the RPI clasp assembly, cast circumferential clasp, P.D. locking semiprecision, Thompson dowel nonlocking semiprecision, and McCollum and Stern G/L precision attachments were tested. Each prosthesis was subjected to various simulated occlusal loads. Evaluation of the load-transfer characteristics of the various designs was based on comparison of the recorded isochromatic fringe distributions. The RPI clasp assembly generated the most uniform stresses. In general, the four intracoronal retainer frameworks produced higher stresses than did the two clasp frameworks. The highest stresses were developed by the Stern G/L precision attachment.</abstract>
<qualityIndicators><score>6.681</score>
<pdfWordCount>3313</pdfWordCount>
<pdfCharCount>21322</pdfCharCount>
<pdfVersion>1.3</pdfVersion>
<pdfPageCount>7</pdfPageCount>
<pdfPageSize>612 x 828 pts</pdfPageSize>
<refBibsNative>true</refBibsNative>
<abstractWordCount>114</abstractWordCount>
<abstractCharCount>905</abstractCharCount>
<keywordCount>1</keywordCount>
</qualityIndicators>
<title>Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
<pmid><json:string>2681701</json:string>
</pmid>
<pii><json:string>0022-3913(89)90339-9</json:string>
</pii>
<genre><json:string>research-article</json:string>
</genre>
<host><title>The Journal of Prosthetic Dentistry</title>
<language><json:string>unknown</json:string>
</language>
<publicationDate>1989</publicationDate>
<issn><json:string>0022-3913</json:string>
</issn>
<pii><json:string>S0022-3913(89)X8101-X</json:string>
</pii>
<volume>62</volume>
<issue>3</issue>
<pages><first>313</first>
<last>319</last>
</pages>
<genre><json:string>journal</json:string>
</genre>
</host>
<namedEntities><unitex><date><json:string>1989</json:string>
</date>
<geogName></geogName>
<orgName><json:string>Ney Co.</json:string>
<json:string>Rinehart Foundation</json:string>
<json:string>University of California, Los Angeles</json:string>
<json:string>Thiokol Chemical Division, Trenton</json:string>
<json:string>University of Missouri</json:string>
<json:string>Austenal Co., Chicago, Ill</json:string>
<json:string>Howmedica, Inc., Chicago, Ill</json:string>
<json:string>Photolastic, Inc., Raleigh</json:string>
<json:string>Department of Removable Prosthodontics, University of Missouri, School of Dentistry</json:string>
<json:string>Buffalo Dental Manufacturing Co.</json:string>
</orgName>
<orgName_funder></orgName_funder>
<orgName_provider></orgName_provider>
<persName><json:string>AL Design</json:string>
<json:string>Angelo A. Caputo</json:string>
<json:string>The</json:string>
<json:string>J. Moore</json:string>
<json:string>AL Fig</json:string>
<json:string>Vertical</json:string>
<json:string>Distal</json:string>
<json:string>D.Sc</json:string>
</persName>
<placeName><json:string>MO.</json:string>
<json:string>Los Angeles</json:string>
<json:string>Calif.</json:string>
</placeName>
<ref_url></ref_url>
<ref_bibl></ref_bibl>
<bibl></bibl>
</unitex>
</namedEntities>
<ark><json:string>ark:/67375/6H6-D2QSC1VK-8</json:string>
</ark>
<categories><wos><json:string>1 - science</json:string>
<json:string>2 - dentistry, oral surgery & medicine</json:string>
</wos>
<scienceMetrix><json:string>1 - health sciences</json:string>
<json:string>2 - clinical medicine</json:string>
<json:string>3 - dentistry</json:string>
</scienceMetrix>
<scopus><json:string>1 - Health Sciences</json:string>
<json:string>2 - Dentistry</json:string>
<json:string>3 - Oral Surgery</json:string>
</scopus>
<inist><json:string>1 - sciences appliquees, technologies et medecines</json:string>
<json:string>2 - sciences biologiques et medicales</json:string>
<json:string>3 - sciences biologiques fondamentales et appliquees. psychologie</json:string>
<json:string>4 - invertebres</json:string>
</inist>
</categories>
<publicationDate>1989</publicationDate>
<copyrightDate>1989</copyrightDate>
<doi><json:string>10.1016/0022-3913(89)90339-9</json:string>
</doi>
<id>4C433BE4C9EF7D7345340242CCD61569FB99C340</id>
<score>1</score>
<fulltext><json:item><extension>pdf</extension>
<original>true</original>
<mimetype>application/pdf</mimetype>
<uri>https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/fulltext/pdf</uri>
</json:item>
<json:item><extension>zip</extension>
<original>false</original>
<mimetype>application/zip</mimetype>
<uri>https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/fulltext/zip</uri>
</json:item>
<istex:fulltextTEI uri="https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/fulltext/tei"><teiHeader><fileDesc><titleStmt><title level="a" type="main" xml:lang="en">Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
</titleStmt>
<publicationStmt><authority>ISTEX</authority>
<publisher>ELSEVIER</publisher>
<availability><p>©1989 The C. V. Mosby Company</p>
</availability>
<date>1989</date>
</publicationStmt>
<notesStmt><note>Supported by Rinehart Foundation research grant No. K-4-25315-5182.</note>
</notesStmt>
<sourceDesc><biblStruct type="inbook"><analytic><title level="a" type="main" xml:lang="en">Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
<author xml:id="author-0000"><persName><forename type="first">Tsau-Mau</forename>
<surname>Chou</surname>
</persName>
<roleName type="degree">D.M.D., M.Sc.D., D.Sc.D.</roleName>
<note type="biography">Reprint requests to:,Dr. Tsau-Mau Chou University of Missouri School of Dentistry Kansas City, MO 64108.</note>
<note type="biography">Associate Professor, Department of Removable Prosthodontics, University of Missouri, School of Dentistry.</note>
<affiliation>Reprint requests to:,Dr. Tsau-Mau Chou University of Missouri School of Dentistry Kansas City, MO 64108.</affiliation>
<affiliation>Associate Professor, Department of Removable Prosthodontics, University of Missouri, School of Dentistry.</affiliation>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
</author>
<author xml:id="author-0001"><persName><forename type="first">Angelo A.</forename>
<surname>Caputo</surname>
</persName>
<roleName type="degree">Ph.D.</roleName>
<note type="biography">Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</note>
<affiliation>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</affiliation>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
</author>
<author xml:id="author-0002"><persName><forename type="first">Dorsey J.</forename>
<surname>Moore</surname>
</persName>
<roleName type="degree">D.D.S.</roleName>
<note type="biography">Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</note>
<affiliation>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</affiliation>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
</author>
<author xml:id="author-0003"><persName><forename type="first">Bin</forename>
<surname>Xiao</surname>
</persName>
<roleName type="degree">B.D.S.</roleName>
<note type="biography">Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</note>
<affiliation>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</affiliation>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
</author>
<idno type="istex">4C433BE4C9EF7D7345340242CCD61569FB99C340</idno>
<idno type="DOI">10.1016/0022-3913(89)90339-9</idno>
<idno type="PII">0022-3913(89)90339-9</idno>
<idno type="ArticleID">89903399</idno>
</analytic>
<monogr><title level="j">The Journal of Prosthetic Dentistry</title>
<title level="j" type="abbrev">YMPR</title>
<idno type="pISSN">0022-3913</idno>
<idno type="PII">S0022-3913(89)X8101-X</idno>
<imprint><publisher>ELSEVIER</publisher>
<date type="published" when="1989"></date>
<biblScope unit="volume">62</biblScope>
<biblScope unit="issue">3</biblScope>
<biblScope unit="page" from="313">313</biblScope>
<biblScope unit="page" to="319">319</biblScope>
</imprint>
</monogr>
</biblStruct>
</sourceDesc>
</fileDesc>
<profileDesc><creation><date>1989</date>
</creation>
<langUsage><language ident="en">en</language>
</langUsage>
<abstract xml:lang="en"><p>Abstract: This investigation photoelastically compared the load-transfer characteristics of various bilateral distal-extension removable partial denture designs embodying intracoronal attachments and clasp assemblies. Six distal-extension designs that included the RPI clasp assembly, cast circumferential clasp, P.D. locking semiprecision, Thompson dowel nonlocking semiprecision, and McCollum and Stern G/L precision attachments were tested. Each prosthesis was subjected to various simulated occlusal loads. Evaluation of the load-transfer characteristics of the various designs was based on comparison of the recorded isochromatic fringe distributions. The RPI clasp assembly generated the most uniform stresses. In general, the four intracoronal retainer frameworks produced higher stresses than did the two clasp frameworks. The highest stresses were developed by the Stern G/L precision attachment.</p>
</abstract>
<textClass><keywords scheme="keyword"><list><head>article-category</head>
<item><term>Removable prosthodontics</term>
</item>
</list>
</keywords>
</textClass>
</profileDesc>
<revisionDesc><change when="1989">Published</change>
</revisionDesc>
</teiHeader>
</istex:fulltextTEI>
<json:item><extension>txt</extension>
<original>false</original>
<mimetype>text/plain</mimetype>
<uri>https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/fulltext/txt</uri>
</json:item>
</fulltext>
<metadata><istex:metadataXml wicri:clean="Elsevier doc found" wicri:toSee="Elsevier, no converted or simple article"><istex:xmlDeclaration>version="1.0" encoding="utf-8"</istex:xmlDeclaration>
<istex:docType PUBLIC="-//ES//DTD journal article DTD version 5.0.1//EN//XML" URI="art501.dtd" name="istex:docType"></istex:docType>
<istex:document><article version="5.0" xml:lang="en" docsubtype="fla"><item-info><jid>YMPR</jid>
<aid>89903399</aid>
<ce:pii>0022-3913(89)90339-9</ce:pii>
<ce:doi>10.1016/0022-3913(89)90339-9</ce:doi>
<ce:copyright type="unknown" year="1989">The C. V. Mosby Company</ce:copyright>
<ce:doctopics><ce:doctopic><ce:text>Removable prosthodontics</ce:text>
</ce:doctopic>
</ce:doctopics>
</item-info>
<head><ce:article-footnote><ce:note-para>Supported by Rinehart Foundation research grant No. K-4-25315-5182.</ce:note-para>
</ce:article-footnote>
<ce:title>Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</ce:title>
<ce:author-group><ce:author><ce:given-name>Tsau-Mau</ce:given-name>
<ce:surname>Chou</ce:surname>
<ce:degrees>D.M.D., M.Sc.D., D.Sc.D.</ce:degrees>
<ce:cross-ref refid="cor1"><ce:sup>*</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="aff1"><ce:sup>a</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="aff2"><ce:sup>b</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="fn1"><ce:sup>*</ce:sup>
</ce:cross-ref>
</ce:author>
<ce:author><ce:given-name>Angelo A.</ce:given-name>
<ce:surname>Caputo</ce:surname>
<ce:degrees>Ph.D.</ce:degrees>
<ce:cross-ref refid="aff1"><ce:sup>a</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="aff2"><ce:sup>b</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="fn2"><ce:sup>**</ce:sup>
</ce:cross-ref>
</ce:author>
<ce:author><ce:given-name>Dorsey J.</ce:given-name>
<ce:surname>Moore</ce:surname>
<ce:degrees>D.D.S.</ce:degrees>
<ce:cross-ref refid="aff1"><ce:sup>a</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="aff2"><ce:sup>b</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="fn2"><ce:sup>**</ce:sup>
</ce:cross-ref>
</ce:author>
<ce:author><ce:given-name>Bin</ce:given-name>
<ce:surname>Xiao</ce:surname>
<ce:degrees>B.D.S.</ce:degrees>
<ce:cross-ref refid="aff1"><ce:sup>a</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="aff2"><ce:sup>b</ce:sup>
</ce:cross-ref>
<ce:cross-ref refid="fn2"><ce:sup>**</ce:sup>
</ce:cross-ref>
</ce:author>
<ce:affiliation id="aff1"><ce:label>a</ce:label>
<ce:textfn>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</ce:textfn>
</ce:affiliation>
<ce:affiliation id="aff2"><ce:label>b</ce:label>
<ce:textfn>University of California, Los Angeles, School of Dentistry, Los Angeles, Calif., U.S.A.</ce:textfn>
</ce:affiliation>
<ce:correspondence id="cor1"><ce:label>*</ce:label>
<ce:text><ce:italic>Reprint requests to:</ce:italic>
,<ce:small-caps>Dr. Tsau-Mau Chou University of Missouri School of Dentistry Kansas City, MO</ce:small-caps>
 64108.</ce:text>
</ce:correspondence>
<ce:footnote id="fn1"><ce:label>*</ce:label>
<ce:note-para>Associate Professor, Department of Removable Prosthodontics, University of Missouri, School of Dentistry.</ce:note-para>
</ce:footnote>
<ce:footnote id="fn2"><ce:label>**</ce:label>
<ce:note-para>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</ce:note-para>
</ce:footnote>
</ce:author-group>
<ce:abstract id="ab1" class="author" xml:lang="en"><ce:section-title>Abstract</ce:section-title>
<ce:abstract-sec><ce:simple-para>This investigation photoelastically compared the load-transfer characteristics of various bilateral distal-extension removable partial denture designs embodying intracoronal attachments and clasp assemblies. Six distal-extension designs that included the RPI clasp assembly, cast circumferential clasp, P.D. locking semiprecision, Thompson dowel nonlocking semiprecision, and McCollum and Stern G/L precision attachments were tested. Each prosthesis was subjected to various simulated occlusal loads. Evaluation of the load-transfer characteristics of the various designs was based on comparison of the recorded isochromatic fringe distributions. The RPI clasp assembly generated the most uniform stresses. In general, the four intracoronal retainer frameworks produced higher stresses than did the two clasp frameworks. The highest stresses were developed by the Stern G/L precision attachment.</ce:simple-para>
</ce:abstract-sec>
</ce:abstract>
</head>
<tail><ce:bibliography><ce:section-title>References</ce:section-title>
<ce:bibliography-sec><ce:bib-reference id="bib1"><ce:label>1.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Nally</ce:surname>
<ce:given-name>NN</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Methods of handling abutment teeth in class I partial dentures</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>30</sb:volume-nr>
</sb:series>
<sb:date>1973</sb:date>
</sb:issue>
<sb:pages><sb:first-page>561</sb:first-page>
<sb:last-page>566</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib2"><ce:label>2.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Clayton</ce:surname>
<ce:given-name>JA</ce:given-name>
</sb:author>
<sb:author><ce:surname>Jaslow</ce:surname>
<ce:given-name>CA</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Measuring of clasp force on teeth</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>25</sb:volume-nr>
</sb:series>
<sb:date>1971</sb:date>
</sb:issue>
<sb:pages><sb:first-page>21</sb:first-page>
<sb:last-page>43</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib3"><ce:label>3.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Kratochvil</ce:surname>
<ce:given-name>FJ</ce:given-name>
</sb:author>
<sb:author><ce:surname>Caputo</ce:surname>
<ce:given-name>AA</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Photoelastic analysis of pressure of teeth and bone supporting removable partial dentures</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>32</sb:volume-nr>
</sb:series>
<sb:date>1974</sb:date>
</sb:issue>
<sb:pages><sb:first-page>52</sb:first-page>
<sb:last-page>61</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib4"><ce:label>4.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Thompson</ce:surname>
<ce:given-name>WD</ce:given-name>
</sb:author>
<sb:author><ce:surname>Kratochvil</ce:surname>
<ce:given-name>FJ</ce:given-name>
</sb:author>
<sb:author><ce:surname>Caputo</ce:surname>
<ce:given-name>AA</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Evaluation of photoelastic stress pattern produced by various design of bilateral distal-extension removable partial dentures</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>38</sb:volume-nr>
</sb:series>
<sb:date>1977</sb:date>
</sb:issue>
<sb:pages><sb:first-page>261</sb:first-page>
<sb:last-page>273</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib5"><ce:label>5.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Frank</ce:surname>
<ce:given-name>RP</ce:given-name>
</sb:author>
<sb:author><ce:surname>Brudvik</ce:surname>
<ce:given-name>JS</ce:given-name>
</sb:author>
<sb:author><ce:surname>Nicholls</ce:surname>
<ce:given-name>JI</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>A comparison of the flexibility of wrought wire and cast circumferential clasps</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Phosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>49</sb:volume-nr>
</sb:series>
<sb:date>1983</sb:date>
</sb:issue>
<sb:pages><sb:first-page>471</sb:first-page>
<sb:last-page>476</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib6"><ce:label>6.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Firtell</ce:surname>
<ce:given-name>DN</ce:given-name>
</sb:author>
<sb:author><ce:surname>Grisius</ce:surname>
<ce:given-name>RJ</ce:given-name>
</sb:author>
<sb:author><ce:surname>Muncheryan</ce:surname>
<ce:given-name>AM</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Reaction of the anterior abutment of a Kennedy class II removable partial denture to various clasp designs: an in vitro study</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>53</sb:volume-nr>
</sb:series>
<sb:date>1985</sb:date>
</sb:issue>
<sb:pages><sb:first-page>77</sb:first-page>
<sb:last-page>82</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib7"><ce:label>7.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Browning</ce:surname>
<ce:given-name>JD</ce:given-name>
</sb:author>
<sb:author><ce:surname>Meadors</ce:surname>
<ce:given-name>LW</ce:given-name>
</sb:author>
<sb:author><ce:surname>Eick</ce:surname>
<ce:given-name>JD</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Movement of three removable partial denture clasp assemblies under occlusal loading</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>55</sb:volume-nr>
</sb:series>
<sb:date>1986</sb:date>
</sb:issue>
<sb:pages><sb:first-page>69</sb:first-page>
<sb:last-page>74</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib8"><ce:label>8.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Browning</ce:surname>
<ce:given-name>JD</ce:given-name>
</sb:author>
<sb:author><ce:surname>Eick</ce:surname>
<ce:given-name>JD</ce:given-name>
</sb:author>
<sb:author><ce:surname>McGarrah</ce:surname>
<ce:given-name>HE</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Abutment tooth movement measures in vivo by using stereophotogrammetry</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>57</sb:volume-nr>
</sb:series>
<sb:date>1987</sb:date>
</sb:issue>
<sb:pages><sb:first-page>823</sb:first-page>
<sb:last-page>828</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib9"><ce:label>9.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Krol</ce:surname>
<ce:given-name>AJ</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Removable partial denture design: an outline syllabus</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:edited-book><sb:edition>3rd ed</sb:edition>
<sb:date>1981</sb:date>
<sb:publisher><sb:name>University of the Pacific</sb:name>
<sb:location>San Francisco</sb:location>
</sb:publisher>
</sb:edited-book>
<sb:pages><sb:first-page>83</sb:first-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib10"><ce:label>10.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Henderson</ce:surname>
<ce:given-name>D</ce:given-name>
</sb:author>
<sb:author><ce:surname>McGivney</ce:surname>
<ce:given-name>GP</ce:given-name>
</sb:author>
<sb:author><ce:surname>Castelberry</ce:surname>
<ce:given-name>DJ</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>McCracken's removable partial prosthodontics</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:edited-book><sb:edition>7th ed</sb:edition>
<sb:date>1985</sb:date>
<sb:publisher><sb:name>CV Mosby Co</sb:name>
<sb:location>St Louis</sb:location>
</sb:publisher>
</sb:edited-book>
<sb:pages><sb:first-page>100</sb:first-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib11"><ce:label>11.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Mensor</ce:surname>
<ce:given-name>MC</ce:given-name>
<ce:suffix>Jr</ce:suffix>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>The rationale of resilient hinge-action stress-breakers</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>20</sb:volume-nr>
</sb:series>
<sb:date>1968</sb:date>
</sb:issue>
<sb:pages><sb:first-page>204</sb:first-page>
<sb:last-page>215</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib12"><ce:label>12.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>White</ce:surname>
<ce:given-name>JT</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Visualization of stress and strain related to removable partial denture abutment</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>40</sb:volume-nr>
</sb:series>
<sb:date>1978</sb:date>
</sb:issue>
<sb:pages><sb:first-page>143</sb:first-page>
<sb:last-page>151</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib13"><ce:label>13.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Kratochvil</ce:surname>
<ce:given-name>JF</ce:given-name>
</sb:author>
<sb:author><ce:surname>Thompson</ce:surname>
<ce:given-name>WD</ce:given-name>
</sb:author>
<sb:author><ce:surname>Caputo</ce:surname>
<ce:given-name>AA</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Photoelastic analysis of stress patterns on teeth and bone with attachment retainers for removable partial dentures</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>46</sb:volume-nr>
</sb:series>
<sb:date>1981</sb:date>
</sb:issue>
<sb:pages><sb:first-page>21</sb:first-page>
<sb:last-page>28</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib14"><ce:label>14.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Baker</ce:surname>
<ce:given-name>JL</ce:given-name>
</sb:author>
<sb:author><ce:surname>Goodkind</ce:surname>
<ce:given-name>RJ</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Theory and practice of precision attachment removable partial dentures</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:edited-book><sb:date>1981</sb:date>
<sb:publisher><sb:name>CV Mosby Co</sb:name>
<sb:location>St Louis</sb:location>
</sb:publisher>
</sb:edited-book>
<sb:pages><sb:first-page>72</sb:first-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib15"><ce:label>15.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Preiskel</ce:surname>
<ce:given-name>HW</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Precision attachments in prosthodontics</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:edited-book><sb:date>1984</sb:date>
<sb:publisher><sb:name>Quintessence Publ Co</sb:name>
<sb:location>Chicago</sb:location>
</sb:publisher>
</sb:edited-book>
<sb:pages><sb:first-page>132</sb:first-page>
<sb:last-page>134</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib16"><ce:label>16.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Kornfeld</ce:surname>
<ce:given-name>M</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Mouth rehabilitation</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:edited-book><sb:edition>2nd ed</sb:edition>
<sb:date>1974</sb:date>
<sb:publisher><sb:name>CV Mosby Co</sb:name>
<sb:location>St Louis</sb:location>
</sb:publisher>
</sb:edited-book>
<sb:pages><sb:first-page>793</sb:first-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib17"><ce:label>17.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Durelli</ce:surname>
<ce:given-name>AJ</ce:given-name>
</sb:author>
<sb:author><ce:surname>Riley</ce:surname>
<ce:given-name>WF</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Introduction to photomechanics</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:book><sb:date>1965</sb:date>
<sb:publisher><sb:name>Prentice-Hall Inc</sb:name>
<sb:location>Inglewood Cliffs, NJ</sb:location>
</sb:publisher>
</sb:book>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib18"><ce:label>18.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Caputo</ce:surname>
<ce:given-name>AA</ce:given-name>
</sb:author>
<sb:author><ce:surname>Standlee</ce:surname>
<ce:given-name>JP</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>Biomechanics in clinical dentistry</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:edited-book><sb:date>1987</sb:date>
<sb:publisher><sb:name>Quintessence Publ Co</sb:name>
<sb:location>Chicago</sb:location>
</sb:publisher>
</sb:edited-book>
<sb:pages><sb:first-page>21</sb:first-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
<ce:bib-reference id="bib19"><ce:label>19.</ce:label>
<sb:reference><sb:contribution><sb:authors><sb:author><ce:surname>Koper</ce:surname>
<ce:given-name>A</ce:given-name>
</sb:author>
</sb:authors>
<sb:title><sb:maintitle>An intracoronal semiprecision retainer for removable partial dentures—the Thompson dowel</sb:maintitle>
</sb:title>
</sb:contribution>
<sb:host><sb:issue><sb:series><sb:title><sb:maintitle>J Prosthet Dent</sb:maintitle>
</sb:title>
<sb:volume-nr>30</sb:volume-nr>
</sb:series>
<sb:date>1973</sb:date>
</sb:issue>
<sb:pages><sb:first-page>759</sb:first-page>
<sb:last-page>768</sb:last-page>
</sb:pages>
</sb:host>
</sb:reference>
</ce:bib-reference>
</ce:bibliography-sec>
</ce:bibliography>
</tail>
</article>
</istex:document>
</istex:metadataXml>
<mods version="3.6"><titleInfo lang="en"><title>Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
</titleInfo>
<titleInfo type="alternative" lang="en" contentType="CDATA"><title>Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures</title>
</titleInfo>
<name type="personal"><namePart type="given">Tsau-Mau</namePart>
<namePart type="family">Chou</namePart>
<namePart type="termsOfAddress">D.M.D., M.Sc.D., D.Sc.D.</namePart>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
<description>Reprint requests to:,Dr. Tsau-Mau Chou University of Missouri School of Dentistry Kansas City, MO 64108.</description>
<description>Associate Professor, Department of Removable Prosthodontics, University of Missouri, School of Dentistry.</description>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Angelo A.</namePart>
<namePart type="family">Caputo</namePart>
<namePart type="termsOfAddress">Ph.D.</namePart>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
<description>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</description>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Dorsey J.</namePart>
<namePart type="family">Moore</namePart>
<namePart type="termsOfAddress">D.D.S.</namePart>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
<description>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</description>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Bin</namePart>
<namePart type="family">Xiao</namePart>
<namePart type="termsOfAddress">B.D.S.</namePart>
<affiliation>University of Missouri, School of Dentistry, Kansas City, Mo., U.S.A.</affiliation>
<description>Professor and Chairman, Biomaterials Science Section, University of California, Los Angeles, School of Dentistry.</description>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<typeOfResource>text</typeOfResource>
<genre type="research-article" displayLabel="Full-length article" authority="ISTEX" authorityURI="https://content-type.data.istex.fr" valueURI="https://content-type.data.istex.fr/ark:/67375/XTP-1JC4F85T-7">research-article</genre>
<originInfo><publisher>ELSEVIER</publisher>
<dateIssued encoding="w3cdtf">1989</dateIssued>
<copyrightDate encoding="w3cdtf">1989</copyrightDate>
</originInfo>
<language><languageTerm type="code" authority="iso639-2b">eng</languageTerm>
<languageTerm type="code" authority="rfc3066">en</languageTerm>
</language>
<abstract lang="en">Abstract: This investigation photoelastically compared the load-transfer characteristics of various bilateral distal-extension removable partial denture designs embodying intracoronal attachments and clasp assemblies. Six distal-extension designs that included the RPI clasp assembly, cast circumferential clasp, P.D. locking semiprecision, Thompson dowel nonlocking semiprecision, and McCollum and Stern G/L precision attachments were tested. Each prosthesis was subjected to various simulated occlusal loads. Evaluation of the load-transfer characteristics of the various designs was based on comparison of the recorded isochromatic fringe distributions. The RPI clasp assembly generated the most uniform stresses. In general, the four intracoronal retainer frameworks produced higher stresses than did the two clasp frameworks. The highest stresses were developed by the Stern G/L precision attachment.</abstract>
<note>Supported by Rinehart Foundation research grant No. K-4-25315-5182.</note>
<subject><genre>article-category</genre>
<topic>Removable prosthodontics</topic>
</subject>
<relatedItem type="host"><titleInfo><title>The Journal of Prosthetic Dentistry</title>
</titleInfo>
<titleInfo type="abbreviated"><title>YMPR</title>
</titleInfo>
<genre type="journal" authority="ISTEX" authorityURI="https://publication-type.data.istex.fr" valueURI="https://publication-type.data.istex.fr/ark:/67375/JMC-0GLKJH51-B">journal</genre>
<originInfo><publisher>ELSEVIER</publisher>
<dateIssued encoding="w3cdtf">198909</dateIssued>
</originInfo>
<identifier type="ISSN">0022-3913</identifier>
<identifier type="PII">S0022-3913(89)X8101-X</identifier>
<part><date>198909</date>
<detail type="volume"><number>62</number>
<caption>vol.</caption>
</detail>
<detail type="issue"><number>3</number>
<caption>no.</caption>
</detail>
<extent unit="issue-pages"><start>A3</start>
<end>A22</end>
</extent>
<extent unit="issue-pages"><start>249</start>
<end>370</end>
</extent>
<extent unit="pages"><start>313</start>
<end>319</end>
</extent>
</part>
</relatedItem>
<identifier type="istex">4C433BE4C9EF7D7345340242CCD61569FB99C340</identifier>
<identifier type="ark">ark:/67375/6H6-D2QSC1VK-8</identifier>
<identifier type="DOI">10.1016/0022-3913(89)90339-9</identifier>
<identifier type="PII">0022-3913(89)90339-9</identifier>
<identifier type="ArticleID">89903399</identifier>
<accessCondition type="use and reproduction" contentType="copyright">©1989 The C. V. Mosby Company</accessCondition>
<recordInfo><recordContentSource authority="ISTEX" authorityURI="https://loaded-corpus.data.istex.fr" valueURI="https://loaded-corpus.data.istex.fr/ark:/67375/XBH-HKKZVM7B-M">elsevier</recordContentSource>
<recordOrigin>The C. V. Mosby Company, ©1989</recordOrigin>
</recordInfo>
</mods>
<json:item><extension>json</extension>
<original>false</original>
<mimetype>application/json</mimetype>
<uri>https://api.istex.fr/document/4C433BE4C9EF7D7345340242CCD61569FB99C340/metadata/json</uri>
</json:item>
</metadata>
<serie></serie>
</istex>
</record>

Pour manipuler ce document sous Unix (Dilib)

EXPLOR_STEP=$WICRI_ROOT/Wicri/Santé/explor/EdenteV2/Data/Istex/Corpus

HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 002542 | SxmlIndent | more

HfdSelect -h $EXPLOR_AREA/Data/Istex/Corpus/biblio.hfd -nk 002542 | SxmlIndent | more

Pour mettre un lien sur cette page dans le réseau Wicri

{{Explor lien
   |wiki=    Wicri/Santé
   |area=    EdenteV2
   |flux=    Istex
   |étape=   Corpus
   |type=    RBID
   |clé=     ISTEX:4C433BE4C9EF7D7345340242CCD61569FB99C340
   |texte=   Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures
}}

This area was generated with Dilib version V0.6.32.
Data generation: Thu Nov 30 15:26:48 2017. Site generation: Tue Mar 8 16:36:20 2022

	Serveur d'exploration sur le patient édenté
	Attention, ce site est en cours de développement ! Attention, site généré par des moyens informatiques à partir de corpus bruts. Les informations ne sont donc pas validées.

Serveur d'exploration sur le patient édenté

Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures

Photoelastic analysis and comparison of force-transmission characteristics of intracoronal attachments with clasp distal-extension removable partial dentures

Source :

English descriptors

Abstract

Links to Exploration step

Le document en format XML

Pour manipuler ce document sous Unix (Dilib)

Pour mettre un lien sur cette page dans le réseau Wicri