Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor.
Identifieur interne : 000D50 ( Main/Exploration ); précédent : 000D49; suivant : 000D51Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor.
Auteurs : M J Singh [Inde] ; H P L. De EschSource :
- The Review of scientific instruments ; 2010.
Abstract
This paper describes the physics design of a 100 keV, 60 A H(-) accelerator for the diagnostic neutral beam (DNB) for international tokamak experimental reactor (ITER). The accelerator is a three grid system comprising of 1280 apertures, grouped in 16 groups with 80 apertures per beam group. Several computer codes have been used to optimize the design which follows the same philosophy as the ITER Design Description Document (DDD) 5.3 and the 1 MeV heating and current drive beam line [R. Hemsworth, H. Decamps, J. Graceffa, B. Schunke, M. Tanaka, M. Dremel, A. Tanga, H. P. L. De Esch, F. Geli, J. Milnes, T. Inoue, D. Marcuzzi, P. Sonato, and P. Zaccaria, Nucl. Fusion 49, 045006 (2009)]. The aperture shapes, intergrid distances, and the extractor voltage have been optimized to minimize the beamlet divergence. To suppress the acceleration of coextracted electrons, permanent magnets have been incorporated in the extraction grid, downstream of the cooling water channels. The electron power loads on the extractor and the grounded grids have been calculated assuming 1 coextracted electron per ion. The beamlet divergence is calculated to be 4 mrad. At present the design for the filter field of the RF based ion sources for ITER is not fixed, therefore a few configurations of the same have been considered. Their effect on the transmission of the electrons and beams through the accelerator has been studied. The OPERA-3D code has been used to estimate the aperture offset steering constant of the grounded grid and the extraction grid, the space charge interaction between the beamlets and the kerb design required to compensate for this interaction. All beamlets in the DNB must be focused to a single point in the duct, 20.665 m from the grounded grid, and the required geometrical aimings and aperture offsets have been calculated.
DOI: 10.1063/1.3271535
PubMed: 20113091
Affiliations:
Links toward previous steps (curation, corpus...)
- to stream PubMed, to step Corpus: 000367
- to stream PubMed, to step Curation: 000367
- to stream PubMed, to step Checkpoint: 000340
- to stream Ncbi, to step Merge: 000662
- to stream Ncbi, to step Curation: 000662
- to stream Ncbi, to step Checkpoint: 000662
- to stream Main, to step Merge: 000D58
- to stream Main, to step Curation: 000D50
Le document en format XML
<record><TEI><teiHeader><fileDesc><titleStmt><title xml:lang="en">Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor.</title><author><name sortKey="Singh, M J" sort="Singh, M J" uniqKey="Singh M" first="M J" last="Singh">M J Singh</name><affiliation wicri:level="1"><nlm:affiliation>ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India.</nlm:affiliation><country xml:lang="fr">Inde</country><wicri:regionArea>ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428</wicri:regionArea><wicri:noRegion>Gujarat 382428</wicri:noRegion></affiliation></author><author><name sortKey="De Esch, H P L" sort="De Esch, H P L" uniqKey="De Esch H" first="H P L" last="De Esch">H P L. De Esch</name></author></titleStmt><publicationStmt><idno type="wicri:source">PubMed</idno><date when="2010">2010</date><idno type="doi">10.1063/1.3271535</idno><idno type="RBID">pubmed:20113091</idno><idno type="pmid">20113091</idno><idno type="wicri:Area/PubMed/Corpus">000367</idno><idno type="wicri:Area/PubMed/Curation">000367</idno><idno type="wicri:Area/PubMed/Checkpoint">000340</idno><idno type="wicri:Area/Ncbi/Merge">000662</idno><idno type="wicri:Area/Ncbi/Curation">000662</idno><idno type="wicri:Area/Ncbi/Checkpoint">000662</idno><idno type="wicri:Area/Main/Merge">000D58</idno><idno type="wicri:Area/Main/Curation">000D50</idno><idno type="wicri:Area/Main/Exploration">000D50</idno></publicationStmt><sourceDesc><biblStruct><analytic><title xml:lang="en">Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor.</title><author><name sortKey="Singh, M J" sort="Singh, M J" uniqKey="Singh M" first="M J" last="Singh">M J Singh</name><affiliation wicri:level="1"><nlm:affiliation>ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India.</nlm:affiliation><country xml:lang="fr">Inde</country><wicri:regionArea>ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428</wicri:regionArea><wicri:noRegion>Gujarat 382428</wicri:noRegion></affiliation></author><author><name sortKey="De Esch, H P L" sort="De Esch, H P L" uniqKey="De Esch H" first="H P L" last="De Esch">H P L. De Esch</name></author></analytic><series><title level="j">The Review of scientific instruments</title><idno type="e-ISSN">1089-7623</idno><imprint><date when="2010" type="published">2010</date></imprint></series></biblStruct></sourceDesc></fileDesc><profileDesc><textClass></textClass></profileDesc></teiHeader><front><div type="abstract" xml:lang="en">This paper describes the physics design of a 100 keV, 60 A H(-) accelerator for the diagnostic neutral beam (DNB) for international tokamak experimental reactor (ITER). The accelerator is a three grid system comprising of 1280 apertures, grouped in 16 groups with 80 apertures per beam group. Several computer codes have been used to optimize the design which follows the same philosophy as the ITER Design Description Document (DDD) 5.3 and the 1 MeV heating and current drive beam line [R. Hemsworth, H. Decamps, J. Graceffa, B. Schunke, M. Tanaka, M. Dremel, A. Tanga, H. P. L. De Esch, F. Geli, J. Milnes, T. Inoue, D. Marcuzzi, P. Sonato, and P. Zaccaria, Nucl. Fusion 49, 045006 (2009)]. The aperture shapes, intergrid distances, and the extractor voltage have been optimized to minimize the beamlet divergence. To suppress the acceleration of coextracted electrons, permanent magnets have been incorporated in the extraction grid, downstream of the cooling water channels. The electron power loads on the extractor and the grounded grids have been calculated assuming 1 coextracted electron per ion. The beamlet divergence is calculated to be 4 mrad. At present the design for the filter field of the RF based ion sources for ITER is not fixed, therefore a few configurations of the same have been considered. Their effect on the transmission of the electrons and beams through the accelerator has been studied. The OPERA-3D code has been used to estimate the aperture offset steering constant of the grounded grid and the extraction grid, the space charge interaction between the beamlets and the kerb design required to compensate for this interaction. All beamlets in the DNB must be focused to a single point in the duct, 20.665 m from the grounded grid, and the required geometrical aimings and aperture offsets have been calculated.</div></front></TEI><affiliations><list><country><li>Inde</li></country></list><tree><noCountry><name sortKey="De Esch, H P L" sort="De Esch, H P L" uniqKey="De Esch H" first="H P L" last="De Esch">H P L. De Esch</name></noCountry><country name="Inde"><noRegion><name sortKey="Singh, M J" sort="Singh, M J" uniqKey="Singh M" first="M J" last="Singh">M J Singh</name></noRegion></country></tree></affiliations></record>Pour manipuler ce document sous Unix (Dilib)
EXPLOR_STEP=$WICRI_ROOT/Wicri/Musique/explor/OperaV1/Data/Main/Exploration
HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 000D50 | SxmlIndent | more
Ou
HfdSelect -h $EXPLOR_AREA/Data/Main/Exploration/biblio.hfd -nk 000D50 | SxmlIndent | more
Pour mettre un lien sur cette page dans le réseau Wicri
{{Explor lien
|wiki= Wicri/Musique
|area= OperaV1
|flux= Main
|étape= Exploration
|type= RBID
|clé= pubmed:20113091
|texte= Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor.
}}
Pour générer des pages wiki
HfdIndexSelect -h $EXPLOR_AREA/Data/Main/Exploration/RBID.i -Sk "pubmed:20113091" \
| HfdSelect -Kh $EXPLOR_AREA/Data/Main/Exploration/biblio.hfd \
| NlmPubMed2Wicri -a OperaV1
| This area was generated with Dilib version V0.6.21. |  |