On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing
Identifieur interne : 000298 ( Istex/Corpus ); précédent : 000297; suivant : 000299On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing
Auteurs : Quentin Bénard ; Magali Fois ; Michel Grisel ; Céline PicardSource :
- Macromolecular Symposia [ 1022-1360 ] ; 2007-04.
English descriptors
- KwdEn :
Abstract
Nowadays the interest of surface preparation in order to manufacture lighter bonded assemblies is well recognized. However only few study dealing with ageing of bonded composite assembly is described in the literature. The present paper mainly aims to compare the influence of the polymer surface thickness of carbon/epoxy composites on the adhesion behaviour at the initial state and after thermo‐oxydative ageing. Conclusions show that contrary to the initial state, the reduction of the polymer surface layer thickness does not improve ageing behaviour. Indeed, the increase of polymer thickness provides a good protection of the degradation coming from micro/macro voids from the adhesive layer.
Url:
DOI: 10.1002/masy.200750448
Links to Exploration step
ISTEX:5512E383BAD7FEB8183E529CBEF87D2D1A185B13Le document en format XML
<record><TEI wicri:istexFullTextTei="biblStruct"><teiHeader><fileDesc><titleStmt><title xml:lang="en">On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
<author><name sortKey="Benard, Quentin" sort="Benard, Quentin" uniqKey="Benard Q" first="Quentin" last="Bénard">Quentin Bénard</name>
<affiliation><mods:affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Fois, Magali" sort="Fois, Magali" uniqKey="Fois M" first="Magali" last="Fois">Magali Fois</name>
<affiliation><mods:affiliation>C.E.R.T.E.S., Université Paris XII, 61 Avenue du Général De Gaulle, 94010 Créteil Cedex</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Grisel, Michel" sort="Grisel, Michel" uniqKey="Grisel M" first="Michel" last="Grisel">Michel Grisel</name>
<affiliation><mods:affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Picard, Celine" sort="Picard, Celine" uniqKey="Picard C" first="Céline" last="Picard">Céline Picard</name>
<affiliation><mods:affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</mods:affiliation>
</affiliation>
</author>
</titleStmt>
<publicationStmt><idno type="wicri:source">ISTEX</idno>
<idno type="RBID">ISTEX:5512E383BAD7FEB8183E529CBEF87D2D1A185B13</idno>
<date when="2007" year="2007">2007</date>
<idno type="doi">10.1002/masy.200750448</idno>
<idno type="url">https://api.istex.fr/document/5512E383BAD7FEB8183E529CBEF87D2D1A185B13/fulltext/pdf</idno>
<idno type="wicri:Area/Istex/Corpus">000298</idno>
</publicationStmt>
<sourceDesc><biblStruct><analytic><title level="a" type="main" xml:lang="en">On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
<author><name sortKey="Benard, Quentin" sort="Benard, Quentin" uniqKey="Benard Q" first="Quentin" last="Bénard">Quentin Bénard</name>
<affiliation><mods:affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Fois, Magali" sort="Fois, Magali" uniqKey="Fois M" first="Magali" last="Fois">Magali Fois</name>
<affiliation><mods:affiliation>C.E.R.T.E.S., Université Paris XII, 61 Avenue du Général De Gaulle, 94010 Créteil Cedex</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Grisel, Michel" sort="Grisel, Michel" uniqKey="Grisel M" first="Michel" last="Grisel">Michel Grisel</name>
<affiliation><mods:affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</mods:affiliation>
</affiliation>
</author>
<author><name sortKey="Picard, Celine" sort="Picard, Celine" uniqKey="Picard C" first="Céline" last="Picard">Céline Picard</name>
<affiliation><mods:affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</mods:affiliation>
</affiliation>
</author>
</analytic>
<monogr></monogr>
<series><title level="j">Macromolecular Symposia</title>
<title level="j" type="abbrev">Macromol. Symp.</title>
<idno type="ISSN">1022-1360</idno>
<idno type="eISSN">1521-3900</idno>
<imprint><publisher>WILEY‐VCH Verlag</publisher>
<pubPlace>Weinheim</pubPlace>
<date type="published" when="2007-04">2007-04</date>
<biblScope unit="volume">249-250</biblScope>
<biblScope unit="issue">1</biblScope>
<biblScope unit="page" from="635">635</biblScope>
<biblScope unit="page" to="640">640</biblScope>
</imprint>
<idno type="ISSN">1022-1360</idno>
</series>
<idno type="istex">5512E383BAD7FEB8183E529CBEF87D2D1A185B13</idno>
<idno type="DOI">10.1002/masy.200750448</idno>
<idno type="ArticleID">MASY200750448</idno>
</biblStruct>
</sourceDesc>
<seriesStmt><idno type="ISSN">1022-1360</idno>
</seriesStmt>
</fileDesc>
<profileDesc><textClass><keywords scheme="KwdEn" xml:lang="en"><term>adhesion</term>
<term>ageing</term>
<term>composites</term>
<term>epoxy</term>
</keywords>
</textClass>
<langUsage><language ident="en">en</language>
</langUsage>
</profileDesc>
</teiHeader>
<front><div type="abstract" xml:lang="en">Nowadays the interest of surface preparation in order to manufacture lighter bonded assemblies is well recognized. However only few study dealing with ageing of bonded composite assembly is described in the literature. The present paper mainly aims to compare the influence of the polymer surface thickness of carbon/epoxy composites on the adhesion behaviour at the initial state and after thermo‐oxydative ageing. Conclusions show that contrary to the initial state, the reduction of the polymer surface layer thickness does not improve ageing behaviour. Indeed, the increase of polymer thickness provides a good protection of the degradation coming from micro/macro voids from the adhesive layer.</div>
</front>
</TEI>
<istex><corpusName>wiley</corpusName>
<author><json:item><name>Quentin Bénard</name>
<affiliations><json:string>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</json:string>
</affiliations>
</json:item>
<json:item><name>Magali Fois</name>
<affiliations><json:string>C.E.R.T.E.S., Université Paris XII, 61 Avenue du Général De Gaulle, 94010 Créteil Cedex</json:string>
</affiliations>
</json:item>
<json:item><name>Michel Grisel</name>
<affiliations><json:string>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</json:string>
</affiliations>
</json:item>
<json:item><name>Céline Picard</name>
<affiliations><json:string>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</json:string>
</affiliations>
</json:item>
</author>
<subject><json:item><lang><json:string>eng</json:string>
</lang>
<value>adhesion</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>ageing</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>composites</value>
</json:item>
<json:item><lang><json:string>eng</json:string>
</lang>
<value>epoxy</value>
</json:item>
</subject>
<articleId><json:string>MASY200750448</json:string>
</articleId>
<language><json:string>eng</json:string>
</language>
<originalGenre><json:string>article</json:string>
</originalGenre>
<abstract>Nowadays the interest of surface preparation in order to manufacture lighter bonded assemblies is well recognized. However only few study dealing with ageing of bonded composite assembly is described in the literature. The present paper mainly aims to compare the influence of the polymer surface thickness of carbon/epoxy composites on the adhesion behaviour at the initial state and after thermo‐oxydative ageing. Conclusions show that contrary to the initial state, the reduction of the polymer surface layer thickness does not improve ageing behaviour. Indeed, the increase of polymer thickness provides a good protection of the degradation coming from micro/macro voids from the adhesive layer.</abstract>
<qualityIndicators><score>2.672</score>
<pdfVersion>1.3</pdfVersion>
<pdfPageSize>434 x 666 pts</pdfPageSize>
<refBibsNative>true</refBibsNative>
<keywordCount>4</keywordCount>
<abstractCharCount>699</abstractCharCount>
<pdfWordCount>1436</pdfWordCount>
<pdfCharCount>9413</pdfCharCount>
<pdfPageCount>6</pdfPageCount>
<abstractWordCount>103</abstractWordCount>
</qualityIndicators>
<title>On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
<genre><json:string>article</json:string>
</genre>
<host><volume>249-250</volume>
<publisherId><json:string>MASY</json:string>
</publisherId>
<pages><total>6</total>
<last>640</last>
<first>635</first>
</pages>
<issn><json:string>1022-1360</json:string>
</issn>
<issue>1</issue>
<author><json:item><name>B.C. Kim</name>
</json:item>
<json:item><name>K.D. Ahn</name>
</json:item>
</author>
<subject><json:item><value>Article</value>
</json:item>
</subject>
<genre><json:string>journal</json:string>
</genre>
<language><json:string>unknown</json:string>
</language>
<eissn><json:string>1521-3900</json:string>
</eissn>
<title>Macromolecular Symposia</title>
<doi><json:string>10.1002/(ISSN)1521-3900</json:string>
</doi>
</host>
<publicationDate>2007</publicationDate>
<copyrightDate>2007</copyrightDate>
<doi><json:string>10.1002/masy.200750448</json:string>
</doi>
<id>5512E383BAD7FEB8183E529CBEF87D2D1A185B13</id>
<score>0.46662834</score>
<fulltext><json:item><original>true</original>
<mimetype>application/pdf</mimetype>
<extension>pdf</extension>
<uri>https://api.istex.fr/document/5512E383BAD7FEB8183E529CBEF87D2D1A185B13/fulltext/pdf</uri>
</json:item>
<json:item><original>false</original>
<mimetype>application/zip</mimetype>
<extension>zip</extension>
<uri>https://api.istex.fr/document/5512E383BAD7FEB8183E529CBEF87D2D1A185B13/fulltext/zip</uri>
</json:item>
<istex:fulltextTEI uri="https://api.istex.fr/document/5512E383BAD7FEB8183E529CBEF87D2D1A185B13/fulltext/tei"><teiHeader><fileDesc><titleStmt><title level="a" type="main" xml:lang="en">On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
</titleStmt>
<publicationStmt><authority>ISTEX</authority>
<publisher>WILEY‐VCH Verlag</publisher>
<pubPlace>Weinheim</pubPlace>
<availability><p>Copyright © 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim</p>
</availability>
<date>2007</date>
</publicationStmt>
<sourceDesc><biblStruct type="inbook"><analytic><title level="a" type="main" xml:lang="en">On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
<author xml:id="author-1"><persName><forename type="first">Quentin</forename>
<surname>Bénard</surname>
</persName>
<affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</affiliation>
</author>
<author xml:id="author-2"><persName><forename type="first">Magali</forename>
<surname>Fois</surname>
</persName>
<affiliation>C.E.R.T.E.S., Université Paris XII, 61 Avenue du Général De Gaulle, 94010 Créteil Cedex</affiliation>
</author>
<author xml:id="author-3"><persName><forename type="first">Michel</forename>
<surname>Grisel</surname>
</persName>
<note type="correspondence"><p>Correspondence: U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France. Fax: (+33) 232 74 43 91</p>
</note>
<affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</affiliation>
</author>
<author xml:id="author-4"><persName><forename type="first">Céline</forename>
<surname>Picard</surname>
</persName>
<affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</affiliation>
</author>
</analytic>
<monogr><title level="j">Macromolecular Symposia</title>
<title level="j" type="abbrev">Macromol. Symp.</title>
<idno type="pISSN">1022-1360</idno>
<idno type="eISSN">1521-3900</idno>
<idno type="DOI">10.1002/(ISSN)1521-3900</idno>
<imprint><publisher>WILEY‐VCH Verlag</publisher>
<pubPlace>Weinheim</pubPlace>
<date type="published" when="2007-04"></date>
<biblScope unit="volume">249-250</biblScope>
<biblScope unit="issue">1</biblScope>
<biblScope unit="page" from="635">635</biblScope>
<biblScope unit="page" to="640">640</biblScope>
</imprint>
</monogr>
<idno type="istex">5512E383BAD7FEB8183E529CBEF87D2D1A185B13</idno>
<idno type="DOI">10.1002/masy.200750448</idno>
<idno type="ArticleID">MASY200750448</idno>
</biblStruct>
</sourceDesc>
</fileDesc>
<profileDesc><creation><date>2007</date>
</creation>
<langUsage><language ident="en">en</language>
</langUsage>
<abstract xml:lang="en"><p>Nowadays the interest of surface preparation in order to manufacture lighter bonded assemblies is well recognized. However only few study dealing with ageing of bonded composite assembly is described in the literature. The present paper mainly aims to compare the influence of the polymer surface thickness of carbon/epoxy composites on the adhesion behaviour at the initial state and after thermo‐oxydative ageing. Conclusions show that contrary to the initial state, the reduction of the polymer surface layer thickness does not improve ageing behaviour. Indeed, the increase of polymer thickness provides a good protection of the degradation coming from micro/macro voids from the adhesive layer.</p>
</abstract>
<textClass xml:lang="en"><keywords scheme="keyword"><list><head>keywords</head>
<item><term>adhesion</term>
</item>
<item><term>ageing</term>
</item>
<item><term>composites</term>
</item>
<item><term>epoxy</term>
</item>
</list>
</keywords>
</textClass>
<textClass><keywords scheme="Journal Subject"><list><head>article-category</head>
<item><term>Article</term>
</item>
</list>
</keywords>
</textClass>
</profileDesc>
<revisionDesc><change when="2007-04">Published</change>
</revisionDesc>
</teiHeader>
</istex:fulltextTEI>
<json:item><original>false</original>
<mimetype>text/plain</mimetype>
<extension>txt</extension>
<uri>https://api.istex.fr/document/5512E383BAD7FEB8183E529CBEF87D2D1A185B13/fulltext/txt</uri>
</json:item>
</fulltext>
<metadata><istex:metadataXml wicri:clean="Wiley, elements deleted: body"><istex:xmlDeclaration>version="1.0" encoding="UTF-8" standalone="yes"</istex:xmlDeclaration>
<istex:document><component version="2.0" type="serialArticle" xml:lang="en"><header><publicationMeta level="product"><publisherInfo><publisherName>WILEY‐VCH Verlag</publisherName>
<publisherLoc>Weinheim</publisherLoc>
</publisherInfo>
<doi registered="yes">10.1002/(ISSN)1521-3900</doi>
<issn type="print">1022-1360</issn>
<issn type="electronic">1521-3900</issn>
<idGroup><id type="product" value="MASY"></id>
</idGroup>
<titleGroup><title type="main" xml:lang="en" sort="MACROMOLECULAR SYMPOSIA">Macromolecular Symposia</title>
<title type="short">Macromol. Symp.</title>
</titleGroup>
</publicationMeta>
<publicationMeta level="part" position="10"><doi origin="wiley" registered="yes">10.1002/masy.v249-250:1</doi>
<titleGroup><title type="specialIssueTitle">Advanced Polymer for Emerging Technologies</title>
</titleGroup>
<numberingGroup><numbering type="journalVolume" number="249">249-250</numbering>
<numbering type="journalIssue">1</numbering>
</numberingGroup>
<creators><creator xml:id="sped1" creatorRole="sponsoringEditor"><personName><givenNames>B.C.</givenNames>
<familyName>Kim</familyName>
</personName>
</creator>
<creator xml:id="sped2" creatorRole="sponsoringEditor"><personName><givenNames>K.D.</givenNames>
<familyName>Ahn</familyName>
</personName>
</creator>
</creators>
<coverDate startDate="2007-04">April 2007</coverDate>
</publicationMeta>
<publicationMeta level="unit" type="article" position="105" status="forIssue"><doi origin="wiley" registered="yes">10.1002/masy.200750448</doi>
<idGroup><id type="unit" value="MASY200750448"></id>
</idGroup>
<countGroup><count type="pageTotal" number="6"></count>
</countGroup>
<titleGroup><title type="articleCategory">Article</title>
<title type="tocHeading1">Articles</title>
</titleGroup>
<copyright ownership="publisher">Copyright © 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim</copyright>
<eventGroup><event type="firstOnline" date="2007-03-28"></event>
<event type="publishedOnlineFinalForm" date="2007-03-28"></event>
<event type="xmlConverted" agent="Converter:JWSART34_TO_WML3G version:2.3.10 mode:FullText source:HeaderRef result:HeaderRef" date="2010-06-24"></event>
<event type="xmlConverted" agent="Converter:WILEY_ML3G_TO_WILEY_ML3GV2 version:3.8.8" date="2014-02-02"></event>
<event type="xmlConverted" agent="Converter:WML3G_To_WML3G version:4.1.7 mode:FullText,remove_FC" date="2014-10-31"></event>
</eventGroup>
<numberingGroup><numbering type="pageFirst">635</numbering>
<numbering type="pageLast">640</numbering>
</numberingGroup>
<correspondenceTo>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France. Fax: (+33) 232 74 43 91</correspondenceTo>
<linkGroup><link type="toTypesetVersion" href="file:MASY.MASY200750448.pdf"></link>
</linkGroup>
</publicationMeta>
<contentMeta><countGroup><count type="figureTotal" number="5"></count>
<count type="tableTotal" number="2"></count>
<count type="referenceTotal" number="7"></count>
<count type="wordTotal" number="332"></count>
</countGroup>
<titleGroup><title type="main" xml:lang="en">On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
</titleGroup>
<creators><creator xml:id="au1" creatorRole="author" affiliationRef="#af1"><personName><givenNames>Quentin</givenNames>
<familyName>Bénard</familyName>
</personName>
</creator>
<creator xml:id="au2" creatorRole="author" affiliationRef="#af2"><personName><givenNames>Magali</givenNames>
<familyName>Fois</familyName>
</personName>
</creator>
<creator xml:id="au3" creatorRole="author" affiliationRef="#af1" corresponding="yes"><personName><givenNames>Michel</givenNames>
<familyName>Grisel</familyName>
</personName>
<contactDetails><email normalForm="michel.grisel@univ-lehavre.fr">michel.grisel@univ‐lehavre.fr</email>
</contactDetails>
</creator>
<creator xml:id="au4" creatorRole="author" affiliationRef="#af1"><personName><givenNames>Céline</givenNames>
<familyName>Picard</familyName>
</personName>
</creator>
</creators>
<affiliationGroup><affiliation xml:id="af1" countryCode="FR" type="organization"><unparsedAffiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</unparsedAffiliation>
</affiliation>
<affiliation xml:id="af2" countryCode="FR" type="organization"><unparsedAffiliation>C.E.R.T.E.S., Université Paris XII, 61 Avenue du Général De Gaulle, 94010 Créteil Cedex</unparsedAffiliation>
</affiliation>
</affiliationGroup>
<keywordGroup xml:lang="en" type="author"><keyword xml:id="kwd1">adhesion</keyword>
<keyword xml:id="kwd2">ageing</keyword>
<keyword xml:id="kwd3">composites</keyword>
<keyword xml:id="kwd4">epoxy</keyword>
</keywordGroup>
<abstractGroup><abstract type="main" xml:lang="en"><title type="main">Abstract</title>
<p>Nowadays the interest of surface preparation in order to manufacture lighter bonded assemblies is well recognized. However only few study dealing with ageing of bonded composite assembly is described in the literature. The present paper mainly aims to compare the influence of the polymer surface thickness of carbon/epoxy composites on the adhesion behaviour at the initial state and after thermo‐oxydative ageing. Conclusions show that contrary to the initial state, the reduction of the polymer surface layer thickness does not improve ageing behaviour. Indeed, the increase of polymer thickness provides a good protection of the degradation coming from micro/macro voids from the adhesive layer.</p>
</abstract>
</abstractGroup>
</contentMeta>
</header>
</component>
</istex:document>
</istex:metadataXml>
<mods version="3.6"><titleInfo lang="en"><title>On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
</titleInfo>
<titleInfo type="alternative" contentType="CDATA" lang="en"><title>On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing</title>
</titleInfo>
<name type="personal"><namePart type="given">Quentin</namePart>
<namePart type="family">Bénard</namePart>
<affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Magali</namePart>
<namePart type="family">Fois</namePart>
<affiliation>C.E.R.T.E.S., Université Paris XII, 61 Avenue du Général De Gaulle, 94010 Créteil Cedex</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Michel</namePart>
<namePart type="family">Grisel</namePart>
<affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</affiliation>
<description>Correspondence: U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France. Fax: (+33) 232 74 43 91</description>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<name type="personal"><namePart type="given">Céline</namePart>
<namePart type="family">Picard</namePart>
<affiliation>U.R.C.O.M., Université du Havre, 25 Rue Philippe Lebon, B.P. 540, F 76058 Le Havre Cedex, France</affiliation>
<role><roleTerm type="text">author</roleTerm>
</role>
</name>
<typeOfResource>text</typeOfResource>
<genre type="article" displayLabel="article"></genre>
<originInfo><publisher>WILEY‐VCH Verlag</publisher>
<place><placeTerm type="text">Weinheim</placeTerm>
</place>
<dateIssued encoding="w3cdtf">2007-04</dateIssued>
<copyrightDate encoding="w3cdtf">2007</copyrightDate>
</originInfo>
<language><languageTerm type="code" authority="rfc3066">en</languageTerm>
<languageTerm type="code" authority="iso639-2b">eng</languageTerm>
</language>
<physicalDescription><internetMediaType>text/html</internetMediaType>
<extent unit="figures">5</extent>
<extent unit="tables">2</extent>
<extent unit="references">7</extent>
<extent unit="words">332</extent>
</physicalDescription>
<abstract lang="en">Nowadays the interest of surface preparation in order to manufacture lighter bonded assemblies is well recognized. However only few study dealing with ageing of bonded composite assembly is described in the literature. The present paper mainly aims to compare the influence of the polymer surface thickness of carbon/epoxy composites on the adhesion behaviour at the initial state and after thermo‐oxydative ageing. Conclusions show that contrary to the initial state, the reduction of the polymer surface layer thickness does not improve ageing behaviour. Indeed, the increase of polymer thickness provides a good protection of the degradation coming from micro/macro voids from the adhesive layer.</abstract>
<subject lang="en"><genre>keywords</genre>
<topic>adhesion</topic>
<topic>ageing</topic>
<topic>composites</topic>
<topic>epoxy</topic>
</subject>
<relatedItem type="host"><titleInfo><title>Macromolecular Symposia</title>
</titleInfo>
<titleInfo type="abbreviated"><title>Macromol. Symp.</title>
</titleInfo>
<name type="personal"><namePart type="given">B.C.</namePart>
<namePart type="family">Kim</namePart>
</name>
<name type="personal"><namePart type="given">K.D.</namePart>
<namePart type="family">Ahn</namePart>
</name>
<genre type="journal">journal</genre>
<subject><genre>article-category</genre>
<topic>Article</topic>
</subject>
<identifier type="ISSN">1022-1360</identifier>
<identifier type="eISSN">1521-3900</identifier>
<identifier type="DOI">10.1002/(ISSN)1521-3900</identifier>
<identifier type="PublisherID">MASY</identifier>
<part><date>2007</date>
<detail type="title"><title>Advanced Polymer for Emerging Technologies</title>
</detail>
<detail type="volume"><caption>vol.</caption>
<number>249-250</number>
</detail>
<detail type="issue"><caption>no.</caption>
<number>1</number>
</detail>
<extent unit="pages"><start>635</start>
<end>640</end>
<total>6</total>
</extent>
</part>
</relatedItem>
<identifier type="istex">5512E383BAD7FEB8183E529CBEF87D2D1A185B13</identifier>
<identifier type="DOI">10.1002/masy.200750448</identifier>
<identifier type="ArticleID">MASY200750448</identifier>
<accessCondition type="use and reproduction" contentType="copyright">Copyright © 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim</accessCondition>
<recordInfo><recordContentSource>WILEY</recordContentSource>
<recordOrigin>WILEY‐VCH Verlag</recordOrigin>
</recordInfo>
</mods>
</metadata>
<serie></serie>
</istex>
</record>
Pour manipuler ce document sous Unix (Dilib)
EXPLOR_STEP=$WICRI_ROOT/Wicri/France/explor/LeHavreV1/Data/Istex/Corpus
HfdSelect -h $EXPLOR_STEP/biblio.hfd -nk 000298 | SxmlIndent | more
Ou
HfdSelect -h $EXPLOR_AREA/Data/Istex/Corpus/biblio.hfd -nk 000298 | SxmlIndent | more
Pour mettre un lien sur cette page dans le réseau Wicri
{{Explor lien |wiki= Wicri/France |area= LeHavreV1 |flux= Istex |étape= Corpus |type= RBID |clé= ISTEX:5512E383BAD7FEB8183E529CBEF87D2D1A185B13 |texte= On the Influence of Polymer Surface Layer Thickness on the Adhesion of Composite Assembly. Differences between Initial State and Thermal Ageing }}
![]() | This area was generated with Dilib version V0.6.25. | ![]() |